Shopping Cart

Your cart is empty.

Your cart is empty.

3/16 inch Double Flaring Tool for Copper Steel Nickel Tubing 45 Degree SAE Flaring Tools for Brake Lines

5.0 Write Review
Free shipping on orders over $29.99

$23.99

$ 11 .99 $11.99

In Stock
  • The double flaring took kit include 1x 3/16 inch double flaring tool (removable handle), 1x double ended OP1/OP2 punch, 1x positioning bolt and 1x container of die lubricant
  • This flaring tool is suitable 3/16 inch automotive brake nickel copper tubing Line. Not recommended for use on stainless steel tubing
  • This compact and portable double flaring tool lets you easily create high quality 45-degree SAE double flares on 3/16 inch tubing such as brake lines
  • Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots. Handle can be removed if you prefer to use in a bench vise
  • Made of superior quality alloy steel, high hardness, strong pressure resistance, can greatly extend the service life. Tips: make sure you clean the brake line with brake clean then lock it down


Product Description

Double Flaring Tool
Double Flare Tool

How to Use

Step 1: Loosen the 10mm locking screws to allow tubing to be inserted into the tool.

Step 2: Insert the metal tube and gently tighten the locking screw. Insert the positioning bolt into the large threaded opening of the tool and tighten it. Slide the clamp sleeve inward until it is flush with the locating bolt.

Step 3: Tighten the locking screws to firmly secure the tubing. Unscrew and remove the position bolt.

Step 4: Lubricate the OP1 end of the punch with the included die lubricant. Insert the OP1 end into the large threaded opening of the tool. Tighten the punch with a 17mm wrench. The OP1 punch then makes a bubble flare. Unscrew and remove the punch.

Step 5: Lubricate the OP2 end of the punch (opposite of the OP1 end) with the lubricant. Insert the OP2 end into the large threaded opening of the tool. Tighten the punch with a 17mm wrench to complete the double flare.

Step 6: Unscrew and remove the punch. Loosen the locking screws to retrieve the tubing from the tool.

Double Flaring Tool kit

Recommended Products
Hydraulic Flaring Tool Kit with 45° Double & Single Flare, 3/16'-1/2' Brake Line Flaring Tool for Copper, Stainless Steel Tubing, 32 PCS Set with Tubing Cutter & Deburrer

$169.99

$ 66 .99 $66.99

4.3
Select Option
SANATO 14 Pcs Steel Double Flares Tool Black Adapters,Suit For 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 OD Tubing Expander Connector

$11.99

$ 5 .99 $5.99

4.5
Select Option
45 Degree Angle Eccentric Cone Type Flaring Tool Kit for Tubing Pipe 7 Dies Sizes 3/16-3/4 inch for Brass,Aluminum,Copper Pipe in Brake Line Applications or Water Gas Refrigeration.

$31.64

$ 16 .99 $16.99

4.3
Select Option
Cal-Van Tools 166 Hydraulic in Line Flaring Tool, 1 Pack,One Size

$103.10

$ 46 .99 $46.99

4.7
Select Option
RIDGID 41162 377 Precision Non-Ratcheting Pipe Flaring Tool, Flaring Tool for 37-degree SAE Flares

$150.52

$ 62 .99 $62.99

4.9
Select Option
CPS FT800FN R410A Imperial Clutch-Type Ecentric Flaring Tool with Ratchet , Black

$134.62

$ 52 .99 $52.99

4.5
Select Option
NAVAC NAQC1 Flaring Clamp for NAVAC NEF6LM Power Flaring Tool | 5/16' Outside Diameter

$35.00

$ 17 .99 $17.99

4.6
Select Option
Power Flaring Tool Kit for 1/4' - 3/4' HVAC Cordless Flare Tool with Metric and Imperial Integrated Clamps 45° Eccentric Cone for Copper Aluminum Pipe with Deburring and Cutter Tool

$128.97

$ 50 .99 $50.99

5.0
Select Option