Shopping Cart

Your cart is empty.

Your cart is empty.

3/8 Inch x 230 Feet Backer Rod for Gaps & Joints

Free shipping on orders over $29.99

$22.99

$ 9 .99 $9.99

In Stock

1.Size:1/2 Inch X 130 Feet


  • Makes professional joints that last
  • Helps fill in and insulate Jumbo caulk joints and allows the caulking to absorb more movement
  • Caulking adheres to the sides of the joint, but not to the filler rope
  • Made of closed cell poly foam
  • Complies with ASTM C 1330, Type C


Backer Rod is a closed cell, resilient, polyethylene backer rod used as a backup material for construction joints and applications that require sealants. It performs as a depth control for most known cold applied sealants. Sealants will not adhere to it; no bond breaker is required. Composition and Materials: Our Backer Rod is a round, resilient, extruded closed cell polyethylene backer rod with a water resistant outer skin. It is compatible with most known cold applied sealants such as urethane, silicone, acrylic, butyl, polysulfides, latex, and chinking sealants. Specific Uses Include: Expansion joints Highway joints Glazing Log home chinking Parking Decks Curtain Walls Coping joints Isolation joints Temporary joint seal Limitations: Backer Rod should be installed with a roller or blunt, flat-sided tool. Please follow sealant manufacturer specifications for recommended sealant width and depth ratio. For best results, do not puncture, fold or overly stretch the product. The product is made with a water-resistant outer skin, therefore where moisture resistance is important, care should be taken not to puncture this outer surface skin. Installation: Joint or opening must be free of all contaminants, loose materials, dry and free of frost. Select correct rod size for joint width. With a blunt instrument or roller, seat Backer Rod to depth recommended by sealant manufacturer. Technical Data: Backer Rod is chemically inert and will resist gasoline, oil, and most solvents. Product will not stain or adhere to sealants. Density: 1.3-1.9 lbs/ft3 Water Absorption: less than 0.5% by volume 90% Compression Deflection: 5 psi Tensile Strength: > 29 psi Meets standards ASTM D5249 type 3 and ASTM C1330 type C


Hugh
Reviewed in the United States on August 13, 2024
is what it says it is
Robert Woods
Reviewed in the United States on December 22, 2023
I used this to fill the gap between vinyl plank flooring and the walls. Worked exactly as expected.
Pennie Woodstock
Reviewed in the United States on May 9, 2022
Liked everything about it. No mess like caulk.
BigJim
Reviewed in the United States on February 13, 2022
Durable, doesn't snap off when stretched. Stays together while installing. Priced competitively. The backer rod has been in for a week and has kept shape and length even under pressure from the floating laminate floor edging against it. It has kept the pressure against the floor and has not shrank or pulled back/shortened as some brands too once installed by now. The brand of backer rod I used or my other floating floor did not perform as well as this brand has. The other brand shrunk and diameter and actually shortened at the ends. I didn't stretch the other brand but it still shrunk. I wish I would have used this brand on the floor. This brand is definitely higher quality backer rod.
Rob in Florida
Reviewed in the United States on January 14, 2022
Good quality at a good price combined with the unbeatable convenience of Amazon prime delivery!
RWSJ1
Reviewed in the United States on August 28, 2021
My wife created a vegetable garden & the netting worked perfect for the different vegetables growing upwards. Very strong, easy to use & good quality
George Fisher
Reviewed in the United States on November 19, 2020
Filling cracks in my porch was easy using this product. Good value for the money.
Recommended Products

$30.99

$ 13 .99 $13.99

4.4
Select Option