Your cart is empty.
Your cart is empty.
Advantages:
Excellent Flatness - 3D printer glass plateprovides more flat and more smooth build surface than magnetic mat or peisticker, ensuring high flatness for the bottom of model.
Thermal Stability - Compared to ordinaryglass, Borosilicate glass material has excellent thermal and chemicalproperties, has high binding power when heating, easy to separate the plasticparts when cooling.
Super Durable - Borosilicate glass has highhardness, uneasy to break. It is more durable and lasts longer, so no need toreplace the glass plates frequently.
High Temperature - The borosilicate glasshas the characteristics of high temperature resistance, it is suitable forprinting some filaments with high requirements for hot bed temperature.
Features:
Dimensions: 310x310mm, 3mm thick.
Heat resistance up to 350 ℃, no deform.
Compatible: CR-10/CR-10S/CR-10 S3, any heated bed310x310mm
Note:
1.Please take a look at the dimensions anddetails.
2.There will be some errors on the surfaceof glass.
3.The glass can be used normally at 60degree temperature.
4.You need to adjust the Z axis limitswitch up and down when installing.
5.Apply some 3d printing solid glue on theglass surface on before printing.
6.If the glass is broken in transit, please contact us to send a replacement.
Package content
1 x 310x310x3mm Borosilicate glass bed
4 x glass clips
NWA
Reviewed in the United States on June 13, 2024
Flat and works good
Bill Karoly
Reviewed in the United States on May 4, 2023
I have one complaint. Amazon shipped this glass only in the manufacturers packaging and it was not taped shut. Luckily it was ok considering the pizza-like box was open.The glass on the other hand is protected by white foam and peel away plastic top and bottom. I'm using this on my Two Trees Bluer Plus because I have not been happy with the levelness of the PEI bed that came with the printer. The glass is fine as long as you coat it with either hair spray or glue stick.
Relayer
Reviewed in the United States on March 7, 2023
It looks great for a build plate. And I suppose it works great as a material that doesn't expand/contract throughout a large temperature range. But it is hardly able to remain flat across the surface. I generally adjust my starting nozzle height to one paper's sheet thickness above the bed across the surface. If I do so with this glass near the four corners, I get a gap near two sheet's thickness in the center of this glass. That is not acceptable. I get better results surface flatness with the use of a thicker mirror as my build plate.That being said, it doesn't provide good adhesion on its own without using glue or hair spray. I can do the same with a cheaper mirror as my build plate if I have to revert to the use of a solvent for adhesion.
crashman
Reviewed in the United States on March 23, 2022
I am replacing my original CR-10S glass as it mysteriously developed a bow. Using a machinist straight edge and feeler gauges, I found that the center was .008" lower than the edges. Doesn't sound like a lot, but .008" equals 0.2 mm, which is the thickness of of a typical layer. So prints would stick around the edges, but not in the middle. I have a BLTouch, but it can't compensate for this much un-eveness, apparently. I checked the new piece of glass and it is flat to at least .002", or a quarter of a layer. That should be no problem with or without BLTouch. I gather from other reviews that some are getting non-flat glass. Would definitely recommend checking the piece you get before the return window closes. I figured that might happen and was going to keep returning them until I got a good piece. Got lucky on the first one.
S.A.CT
Reviewed in the United States on October 16, 2022
I have a CR-10S Pro V2 and tried 2 different kinds of textured plates and tried blue tape but could not get petg to stick. With this bed and glue stick I have gotten my first good petg prints ever. 255 microswiss nozzle, 90 bed. I am thinking of moving away from pla to petg entirely because most of my prints are workable components and not decorations.It's easy to switch build plates back and forth but this glass is thinner than the stock plate so you have to adjust the z offset and I used a couple pieces of old credit card to shim the glass under the stock clips.
M@r!n3W!f3
Reviewed in the United States on January 12, 2020
This product worked perfectly. My print bed was wavy, so I was unable to get anything to stick to it properly. Slapped this bad boy on there and all of my bed adhesion issues were gone. The clips rattle a little bit, I ended up just removing the metal handles. I do use magic goo, I suppose it's out of habit. But when you use it, it will leave swirls on the glass which will transfer to the printed object, I have no problems with that. When the bed is hot it is extremely hard to pull of right after printing. If you wait for the bed to cool it the print comes right off.
IMTheJuggernaut
Reviewed in the United States on April 29, 2020
Where do I begin.. For me this bed just doesn't work, period.Adhesion: Printing with PLA at somewhat standard specs that work perfectly for my Ender-3 Pro that has it's normal magnetic bed (200C nozzle temp and 50C bed temp), I just can't get anything to stick to it long enough to finish a print. After about 10-20 minutes it starts to come off and I just end up with a mess of stringy plastic until I stop it. I even tried to use Magigoo, and that didn't really help it.Size: It isn't cut to the same size as the CR-10 bed, as you will see from the pictures I am posting (Edit - you can't add images anymore - great!). If I pull it to the front, there is a gap in the back where it doesn't even touch those clips. This didn't really cause any problems in and of itself, but, it's worth it to note that it wasn't cut to "perfectly fit" the CR-10S Pro, at least mine wasn't.I'll also mention that the first one I received was shattered in a million pieces, which I'm not blaming on the seller, as who knows what happened during transit.I'm going to try keeping it for now and get a PEI sheet to put on top, as I'm still hopeful that the glass is at least more level and smooth than the stock bed. I am still giving this item a low review, because it isn't something I should be required to do in order for it to work. I'm not sure how others have had so much more success, I just did not have the same experience!
ZReviews
Reviewed in the United States on July 4, 2019
This replaced my previous bed glass that broke while trying to remove a print. It appears to be acceptably level and has contributed to several successful prints when combined with a PEI sheet.The slightly bigger size(extra 10 mm) fits the CR-10s perfectly, going right up to the edges on all four sides without any overhang.The included clips are bigger than the ones i received with the printer which is a plus.
Recommended Products
