Your cart is empty.
Your cart is empty.Product Description
Manufacturer Part Number: 4617210, 56028196AD, 56021403AA, 4886333AA, 04617210, 68164850AA, 56028196AC
Interchange Part Number: TCS75, 56028196AB, 56028196AA, 22958, 52118652, 2464324, 52118789, 5S13638, 22216
Other Part Number: TCS46, 2N1202, 22955A, 214-3103, 214-3203, 214-1506, 12415C, 12432A, 50185, 12432AB
Tips:
1. Please carefully verify your car year, model in the product details or check your parts pictures, parts No. with ours before purchasing so as to prevent wrong purchase and unnecessary expenses.
volksjager
Reviewed in the United States on July 17, 2024
solenoid is not crimped properly - making it physically impossible to install - after doing some research this is a common issue on these cheap solenoids. either get a genuine Mopar or even better the heavy duty Borg-Warner solenoid - that are not too much more than this useless paperweight
Gerry G.
Reviewed in Mexico on May 30, 2024
el solenoide no encaja bien en la base donde va colocado, necesite ajustar con una pinzas para que entrara, esto no debe pasar con refacciones que son compatibles con el vehículo en cuestión
Sean-Paul R.
Reviewed in the United States on May 5, 2023
Works as intended
Customer
Reviewed in the United States on May 15, 2023
Wasn't apparent it was made in China, did not state that in description. Had to modify hold down bracket where as bracket makes contact with sensor in order to install. Fingers crossed, hoping there isn't an issue later on.
Felix L. Turner III
Reviewed in the United States on February 16, 2023
I've been rebuilding transmissions for 41 years, self-employed for 35 years, and found these at a good price, so I ordered some for stock.I finally used them and they worked good, so that's why I say a good price for the quality!
brandie maurer
Reviewed in the United States on December 9, 2023
Product says it fits a 48RE but it does not. The solenoid is to small. Pressure sensor does fit. Seller made things right! Seller is super easy to work with!
JAY
Reviewed in the United States on July 15, 2022
Worked fine when installed in 2000 Jeep Grand Cherokee. My Jeep was not down shifting so I was starting out from a stop in 2nd or 3rd gear. I did some research and tried these parts along with an accumulator spring. Filled with fresh trans fluid and now drives good as new. Only been a month or so since repair but working good so far.
Robert Georgi
Reviewed in the United States on May 12, 2022
Replaced the parts and saved money. With the cost of living going up everyday need to cut back and do it myself.
michael holland
Reviewed in the United States on February 26, 2022
Dodge It’s a PITA to install this temp pressure sensor’s, but it did get rid of the P1762 or P1764 , I bought a hand pump get Mercon 4 fluid out lot less mess than trying to tip pan in oil tub, used Brake clean for valve body and pan, before you break the clip look at the way it is lock !!!!Also unbolt 2 1/2” bolts then 2 Torque set screws, DONT TRY AND PULL OUT TEMP SENSOR it’s locked in a U channel and so is the pressure solenoid and is part of the metal bracket holding them in. The pressure solenoid is half the size of the OEM one but it works, (You can send the ORG in for rebuild Dodge inherent problem) . Also do yourself a favor and get the reusable gasket, best thing for this repair, then put back think it’s 14 1/2” bolts, I used my new battery 3/8s Ratchet and it torqued bolts to correct torque. Remember better to be a little low than too much dex4 fluid.
Recommended Products
$59.99
$ 27 .99 $27.99