Your cart is empty.
Your cart is empty.
This protection vinyl film will keep your vehicle's appearance by protecting its paint from chipping, scratching on your door handle paint. The protection vinyl film durable, transparent and nearly invisible.
Features:
- The 1st Gen 3M Scotchgard has a paper backing with the 3M logo on it
- 3M Scotchgard Pro Series has NO logos on its plastic backing and is high quality 8mil thick film
- We will ship with our own retail package
- Approximate Size is 3.25" x 3.25"
- Universal Fit On Most Any Vehicle
- Self-adhesive, peel and stick
- Water Resistant
- Can Be Easily Cleaned With Water
- Long Lasting
- Simple to remove. Will leave no damage or residue on surface
Martha
Reviewed in Mexico on September 29, 2024
Aún no los uso.
Randy
Reviewed in the United States on July 8, 2023
Got these because there is a definite quality difference in 3M -vs- Others, from my experience. Shortly after putting them on, they yellowed significantly (see pics). My car is white, and they are almost brown - they look terrible. I attempted to contact the vendor, but their phone will not accept messages, and no response to email. So, I got some real 3M ones and went to replace these. That's when I got my second surprise - the outer cover came off, leaving behind the adhesive residue that I had to manually remove (not fun when it's behind the door handles!!). A 30 minute job turned into more than two hours. Do not buy these - you will regret it! There are real 3M vendors on Amazon, and the product is better!
Stuart Renz
Reviewed in the United States on July 29, 2023
Went on fine with 5% alcohol and water mixture to keep bubbles from forming
Customer
Reviewed in the United States on July 18, 2023
Functions as protective film still but was installed only three months before turning yellow from exposure. Is this genuine 3M material?
Wanggo
Reviewed in the United States on February 23, 2023
THis doesn't stick altogether. Leaves huge bubbles that are impossible to get rid of. I have to constantly run my fingers on it to flatten it. There's a bigger danger of me scratching my car from constantly fixing it than it doing its job. Now water from the rain collects in the bubbles. It's hard to remove so I just left it. Disappointing.
Alan
Reviewed in the United States on June 22, 2020
Great product, I always put on a door cup guard on all my cars. Although when I go to open my door, I never let my finger touch the cup, I can't guarantee anyone who will access my car will, family members or dealership service department, etc. I knocked down easy to install by one star because it does take a little patience and more attention than just peel and slap on. If you have ever out on a screen protector on a tablet or a smartphone, then it should be fairly simple. Some customers here said they received in Chinese or broken English; all I received were pictures. I also wish it was a little wider so it can cover the entire door cup. Clean the area first with Soapy Wooder, I mixed dish soap with some water and put it in an empty spray bottle, remember it wont stick on dirt. Then keep the area a little moist with the Soapy Wooder (not drenched) and then spray some on both your hand. Then peel back the adhesive halfway, then apply the exposed adhesive on the bottom on the door cup and then once it is aligned use your thumbs and push all the water out . Finally removed the rest of the adhesive and do the same for the top. Repeat for al doors.
Arthur
Reviewed in the United States on June 18, 2020
If anyone had a problem installing this product then they didn't follow the instructions. To get all the bubbles out just keep spraying it with the soapy water. Another thing, sometimes you have to adapt to your situation. For example my wife's Nissan Maxima door handles were too deep so I had to trim them to make the fit without ripples. The next step is to see how they hold up but so far they do the job. I even bought a set for my Stinger GT
Laurie
Reviewed in the United States on June 14, 2020
I was skeptical at first when I received the Style 2 door cup protectors because they didn't seem to fit or bend to fit the curves of the cup. I cleaned the door cup and sprayed soapy water as directed but the protector wouldn't conform to the curves very well. I used a hair dryer to heat it up while squeezing out the air and bubbles. The heat helped to soften the film and conformed to the cup while evaporating the excess soapy water. No bubbles or streaks and it is almost invisible on my Silver SUV. It seems thick enough to protect against most scratches. Time will tell but I'm happy with how easily it installed using the hair dryer.
Sportsmom1416
Reviewed in the United States on August 23, 2019
I purchased this product to install on my brand new 2019 Toyota 4 Runner. I made 2 mixtures, in separate squirt bottles, of an alcohol mixture to clean the area and soapy mixture for the application. The alcohol mix was 2 oz rubbing alcohol to 6 oz water. The soapy mix was 8 oz water and 2 to 3 drops of baby shampoo. I cleaned the area behind my door handles with the alcohol mix and dried with a soft cloth. I then lightly sprayed the area with the soapy mix, sprayed my fingers and then peeled the adhesive from the paper and sprayed the side to be attached. I lined up the adhesive where I wanted it and gently worked the bubbles out to the closest edge of the adhesive. It will be slippery so be patient. Once bubbles are gone, gently wipe dry with a soft cloth and work remaining small bubbles out. I did not like how one was positioned so I removed it and started the process again. I found that they can be adjusted as long as they don't set up for a long period of time.My car is white which makes it difficult to see the adhesive in pictures. I am going to apply another set to my husbands brand new black 2019 Honda Accord next. I hope they last and keep the paint behind our door handles from getting scratched from fingernails and rings.It is recommended that you do not wash the vehicle for at least 24 hours to allow adhesive to adhere well.
Recommended Products
