Your cart is empty.
Your cart is empty.Rich LaChance
Reviewed in the United States on March 13, 2025
Terminals worked well
Roger W.
Reviewed in the United States on August 18, 2020
Very poor description of what you are buying I believe. It happens that they are satisfactory for my use. Quality is good. Price is excellent
Pudd16
Reviewed in the United States on December 9, 2020
Price is good. Does exactly as promised. Cons 2 one being the smallest round connector i could find didnt fit had to cut the sides off connector to make fit. Two mounting not to easy
D. Kaul
Reviewed in the United States on August 21, 2018
I use these as distribution blocks for automotive applications. I went from a bees nest of wiring in my dash as a result of an aftermarket headunit, amp, 3 gages and a boost controller to having a neat and organized setup with no more battery drains or wiring issues. They are connected across each terminal, but not 'along' each terminal, so I had to make a lead connecting each terminal and I fed power/ground at one end. I believe they make distribution plates to connect terminals like this, but I love wiring and shrink wrapping so I did it myself. Build quality is great, and it looks like it can handle wayyyy more than what I'm running through it. I've got two of these in my street car (power + ground) and one in our track car and they've helped up great.
Customer Robert
Reviewed in the United States on June 12, 2018
Bought a gang relay box with 5 Bosch relays with 5 terminals per relay.I'm going to run wires from each relay out to these terminal blocks so I can be organized and wire in the circuits as needed.These are nice terminal blocks, only con I can see is these have recessed mount holes and thus can only take smaller mounting screws.I was going to use 8/32 screws but the heads wont fit so I'll need to use 6/32 screws instead. Did not like that.I find the clear plastic cover useless and threw them straight into the trash
Joseph Fox
Reviewed in the United States on May 19, 2018
Great price, halfway decent product. Covers snap in place reliably, and terminals+screws are great for 12-22ga wire. 10ga may be borderline cumbersome on these, they're clearly meant for smaller circuits. If you're wiring a robotic project or something in your car these will probably be just fine. Terminals don't bounce around a lot like other designs. At this price they cannot be matched by their competitors. Would absolutely buy again.
Brent Janes
Reviewed in Canada on February 4, 2016
Arrived as ordered, good product. Now have all the pieces to build my own fuse boxes and take care of my buddies also.
Jesse
Reviewed in the United States on February 20, 2015
These blocks are great. These blocks use #6 terminals.A lot of reviewers seem confused about the proper size terminals for these blocks. Hopefully the following helps:Spade and ring terminals have two dimensions relevant to end users. Wire size and stud size. The correct WIRE size used with the connectors is indicated by COLOR (when using pre insulated terminals).The STUD SIZE (indicated by #) tells you what size stud (the screw) the terminal fits.The color of the insulator has little bearing on the stud size of a terminal. For example a 'Yellow' terminal will accept 12-10AWG WIRE but can have a STUD SIZE of #6, #8 or #10.You can cheat a bit in an upwards direction (ex: force a #6 terminal around a #8 stud) but most terminal blocks will NOT accommodate a larger terminal on a smaller stud as space between the insulators between studs is too narrow. Forcing the terminal isn't a good practice though. Use the correct size terminal and terminal block.Lastly, most DIY stores only stock #6 stud size terminals in quantities of 10. Quantities of 100 or more are typically online or special order only. Something to keep in mind if you need a bunch of them. Buying 10 packs is expensive.
Joel
Reviewed in the United States on January 14, 2015
Plastic is a little stiff, so don't bang them around. Lid just clips on, not super secure. Not sure if there is a standard size for these, but all of the jumpers that I tried do not fit. The jumpers were all too big for these tiny terminals.
Recommended Products
$7.21
$ 2 .99 $2.99