Your cart is empty.
Your cart is empty. Specifications:
Watts: 400W
Length: 4.6"
Width: 3/8"
Connectors: Female Spades
Replaces part numbers: 50-619 & 20-022.
Compatible with Enviro & Vistaflame Pellet Stoves:
Enviro Pellet Stoves:
EF5
Empress FS
Empress Insert
Milan
Mini
Windsor
Vistaflame Pellet Stoves:
VF Windsor
Troubleshooting Igniters:
Igniter failure can be verified on one of three ways.
1. start your stove and visually look for the orange glow;
2. physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated.
3. Use a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. With the igniter removed from the stove, you will need to look over the part to find the rated watts.
If your Ohms reading is within 10%, more or less than the rating (46Ω +/-10%), it's good. If the igniter has a "contained short or a short" within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. It's usually good to look at the part itself for the watts rating.
$113.22
$ 54 .99 $54.99