Your cart is empty.
Your cart is empty.Ultra Quiet motor designed by Fasco>>>If you want Peace and Quiet with Low Vibration…You found the right motor. This motor is so quiet; you won’t know your stove is on. Estimated Lifespan: 15-20 years. Fasco uses the highest standards of engineering with parts calibrated within 1/10,000th of an inch. The room for error is so small is has to be checked using a microscope. Your new motor is designed for Variable Speed which requires high quality electronic components not included in other motors. High temperature rubber bushings and washers are used to Damper Vibration. Go Green. In accord with new environmental standards your new motor is more efficient so it cost less to run. Heat Reduction>>>> FascoExhaustMotors are tested to run 24/7 in hot and dusty atmospheres. Your new motor has a Internal cooling fan designed for heat reduction. Calibrated for high stress operations which keeps the motor cooler and makes it last longer. This combined with Ultra Quiet Engineering results in a motor that lasts a very long time while remaining quiet.
jasen
Reviewed in Canada on February 18, 2025
The media could not be loaded.
Bill b
Reviewed in the United States on September 19, 2024
Great price.
Todd
Reviewed in Canada on December 15, 2024
It's very noisy, not that powerful and the seller has yet to respond.
SCOTT M.
Reviewed in the United States on November 25, 2024
Fits perfectly. Nice and quiet so far!
Sarah Sanford
Reviewed in the United States on May 22, 2023
Works great. Nice blower,quiet,sturdy.
Donald Kuczenski
Reviewed in the United States on January 14, 2023
Old fan was really noisy and had bearing rattle so i bought this one to replace it. 4 bolts but because of the design of the pellet stove you have to be a contortionist, but that has no bearing on the replacement the new fan matched up perfectly.As for the sound. This fan is noisy for about the first hour or so (of each use) but then quiets down. I don’t know if this will get better with time but I’ll still take a fan that’s noisy for two hours as opposed to one that is noisy the whole time.
Clyde Dylan
Reviewed in the United States on February 23, 2022
Remove the back panel on the stove.Remove the two bolts holding the control panel, carefully set aside the panel.Got your 12-inch extender to take out the four bolts/install the new blower? Use it now to remove the four bolts holding the blower.If you have connectors between the old blower and the control panel, carefully disconnect the old blower. If you don't have a connector, get ready to splice, or order new wiring.This blower does not come with a gasket, so order one, or carefully remove the old one and glue it on the new unit (stove gasket cement, not Elmer's). Do not install without a gasket unless you enjoy metal-on-metal vibration noise.With the old blower out, take a few minutes and vacuum inside the stove.Hardest part is installing the new motor. If you're on your own (tight space anyway, so a second person may be only marginally helpful), try a folded towel to prop the new unit as you bolt it to the frame.Reconnect your wires, blower to control panel.Reconnect the control panel.You're ready to test.If all goes well, after shut down reconnect the back panel on the stove.** I found the new blower no less noisy than the old blower. Arrived four days after ordering. Unit was in good shape on arrival. Price point seems a little high for a blower that's as noisy as the old blower. But, it's good to have the pellet stove heating the place again.
Customer
Reviewed in Canada on November 19, 2022
My stove broke down just as it got colder outside. With no dealer in the local area its tough to source parts.Found this on Amazon. It was affordable, shipped super quick and was an exact match except for the first two numbers of the part number.My Stove is up and running and super quiet.No gasket comes with this unitGreat service
Daniel R
Reviewed in Canada on February 5, 2021
the box was delivered damaged and not sealed or may have been opened. there was no packing material at all to protect the blower motor however there was no damage to the blower.the blower motor is the exact same as the OEM unit it is replacing,BUT this motor is alot louder than the OEM one.my stove is in my basement and can be heard in my kitchen and bedrooms upstairs at night, but it heats my whole home easily.i gave this 4 stars because of the packaging.so after almost 1 year to the date this blower moter just quit. i removed the blower and dissasembled it and sprayed some lithium grease on the blower motor shaft and it is working again but who knows for how long. i think this blower is a reman and NOT new. i have lowered my rating to 3 stars.
smelm0
Reviewed in the United States on October 8, 2021
arrived in timely fashion minus a gasket which is specified by manufacturer. very, noisy even after I installed it a 2nd time with a gasket. sounds like a helicopter in the house. usually a sign of bad bearings, etc. and prob not a good indicator of longevity. took about a week to get a return label and another few days for a refund. do yourself a favor and pay more for the best one you can get like from the manufacturer. at least it works nice and quietly and prob will last much, much longer. the restocking fee is troubling as I know and the seller knows these units are all defective. if you read thru other reviews you get to c the thread that runs thru the lot of them. caveat emptor!!!
Tallman
Reviewed in the United States on December 14, 2019
Part numbers are critical for this part. I ordered the right number and it went right in. Go to Englanders site and make sure you attach the common and hot leads to the motor correctly from the board. Englander's site has great information to help you verify your part and testing. They have a great tech help line, have only heard, never had occasion to use. The part was a professional motor and assemble - lot more cfm than my original.
ralph s
Reviewed in the United States on November 22, 2019
great service, altho the first blower sounded loud i am not sure i would have been able to listen to it for very long,but then the fuse on the circuit board blew out,i replaced the fuse and it blew again, so i disconnected the new blower and replace fuse and ordered another blower,the replacement unit made no sound at all and better yet no blowing fuses .some times defective parts get bye quality control . thats life . i would buy again thank you 5 stars
Recommended Products
$67.97
$ 32 .99 $32.99
$330.00
$ 99 .00 $99.00