Your cart is empty.
Your cart is empty.Product Description
Micovay 50MM Guitar Pickup Piezo Transducer Prewired Amplifier With 6.35MM Output
Pickup Wiring Kit for Cigar Box, Acoustic Guitars, Violin , Ukulele , Banjo.
No Battery Required, No Soldering Required, Piezo Pickup Save Time for You, Easy to Install, Convenient to Use
Specification:
Cable length : approx. 260mm/10.24 inch，360mm/14.17inch
Piezoelectric Disk Dia：approx. 50mm/1.97 inch
Plug Dia: approx. 6.35mm/0.25 inch
Instruction:
Step1：Remove the plastic film from the back of the sensor to expose the adhesive
Step2：Place the sensor through the sound hole to the lower front part of the guitar where it produces the best tonal response
Step3：Drill a hole from the body, loosen the end pin jack nut, insert it into the hole and tighten the nut The above procedure depends on different instruments.
The high-quality piezoelectric transducer with a metal body ensures your musical instrument produces a purer acoustic tone by eliminating external sound interference and avoiding sound reflections from nearby objects.
The electronic part is well weld and manufactur, depend on the point at which the patch is mount on the body, you can decide whether to receive the sound of the board or the string.
The pickup is able to directly absorb the vibration signal inside the guitar cabinet, accurately restore the natural resonance and dynamic details of the instrument, and can adapt to different environmental sound requirements.
Maryellen Murray
Reviewed in the United States on May 23, 2025
I’m upping my review to 5 stars. I thought it wasn’t working, but I think it was only user error. It’s working right now. I couldn’t be happier. I will be buying more!
Gary & Pamela Pfalzbot
Reviewed in the United States on April 9, 2025
The Micovay 50MM Guitar Pickup is a fairly simple to install guitar pickup for a number of acoustic instruments and in my case, a low cost acoustic guitar. It should be noted that if you are installing into an instrument that has never had an output jack or volume control installed, you will need to drill into the instrument for a permanent installation. This kit comes with everything you need as far as the pickup, the wiring, the volume potentiometer, and the mounting hardware.I'm generally reluctant to drill holes into a guitar of any kind without knowing how it is ultimately going to sound first. So for testing and review purposes, I chose to mount the transducer pickup temporarily, starting by adhering it just inside the sound hole of my guitar with nano tape, leaving the volume control and output jack uninstalled and dangling. Through this temporary mounting I found through trial and error that the best placement for the transducer on my specific guitar (classical nylon string) is actually best near the bridge of the guitar. I felt I obtained more tonality in this location than I did just inside the sound hole.Everything appears to sound and work as described in the product description. I should also note that the Micovay 50MM Guitar Pickup does not come with any type of instructions, but the product page does outline a Pro Installation Guide that is essentially what steps you need to follow.Overall, for the price point which seems more than fair for a guitar pickup, the Micovay 50MM Guitar Pickup seems like a great low cost product that many acoustic instrumentalists will enjoy. Will it be the best pickup you can buy for your instrument? I'd have to say no, but it does give a nice clear, volume controllable output that will take your instrument to the next level of sound output. At the low cost price, I would recommend the Micovay 50MM Guitar Pickup.
RV'ing with Birds
Reviewed in the United States on April 16, 2025
The media could not be loaded.
Recommended Products
$110.46
$ 43 .99 $43.99