Shopping Cart

Your cart is empty.

Your cart is empty.

58pcs Toggle Bolt and Wing Nut Assortment Kit, Heavy Duty Butterfly Anchors, Wall Anchors for Drywall, Toggle Anchors(1/8in, 3/16in, 1/4in)

Free shipping on orders over $29.99

$13.99

$ 7 .99 $7.99

In Stock

About this item

  • [58pcs Value Package] 58pcs toggle bolt and wing nut assortment kit, include 28pcs 1/8 inch, 15pcs 3/16 inch, 15pcs 1/4 inch. each size engraved with steel marks so you can quickly find the size you need when using it.
  • [Premium Material] CUKAYO toggle bolt is made of carbon steel material, the surface is galvanized, corrosion resistance, no embroider, durable, long service life.
  • [Easy to Install] Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts.
  • [Unique Design] The wall anchors are designed with spreading butterfly wing nuts, when knocked in hollow walls the wings will automatically spread to increase the area of the thrust surface, which enhances the load bearing of the toggle bolts for heavy-duty hanging tasks.
  • [Wide applications] Toggle anchors suitable for hollow brick, gypsum board, cement fiberboard, wood board, and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc.



MikeyFTL
Reviewed in the United States on May 21, 2024
I'm always running out of anchors. My house was built in the 50s and I have both dry and concrete walls. Both are ancient and any repeated drilling or use of screw-in anchors makes them crumble so I always need behind wall anchors. This is a nice set. I needed small ones to secure a keystone wall plate that will regularly get pushed and pulled on and I knew junky drywall anchors would fail quickly. It's now secured tightly and isn't going anywhere. Towel rods are another pain that constantly pull loose from drywall. The jumbo one's were just what I needed to firmly secure all the bathroom fixtures in the house. They're a bit pricey for what they are, but I feel better knowing I won't run out of anchors for years.
Customer
Reviewed in the United States on May 21, 2024
This is a good selection of various sizes ideal for household use. I wish the package listed a tested load rating for each of them as built by the manufacturer but it does not. I tried randomly assembling about a third of them and some of them would easily turn and others took force to screw together. I don't use a lot of toggle bolts (thus the desire for the combo pack) but I don't remember the last ones I used having this issue. This could make it difficult to tighten down the toggle bolt.
azentropy
Reviewed in the United States on May 17, 2024
These are heavy duty and even the smaller ones are quite long. Threads are 1 3/4, 3, and 3 1/4 long.
Mark Rodriguez
Reviewed in the United States on May 15, 2024
I recently received this toggle bolt assortment kit, and it's quickly become my go-to solution for hanging heavy-duty items around my home. The first thing that caught my attention was the comprehensive selection of sizes included in the package. With three different sizes to choose from, I knew I'd have the perfect fit for any project.What sets these toggle bolts apart is their sturdy construction. Made of carbon steel and coated with a corrosion-resistant finish, they're built to last. Whether I'm mounting curtain rods, photo frames, or even flower pots, I can trust that these bolts will provide reliable support for years to come.But what I appreciate most is the ease of installation. The unique design of the butterfly wing nuts makes it simple to identify when they've properly opened up inside the wall. As I screw in the bolt, I can feel the tightening, giving me confidence that it's securely locked in place. It's a straightforward process that saves me time and frustration, especially when tackling multiple hanging projects at once.Recently, I used these toggle bolts to install door hanging racks with hooks for clothing storage. Opting for the 1/8" size was a perfect choice for my needs, and they handled beautifully even in hollow walls and doors. I'm impressed by their load-bearing capacity, and I now feel confident hanging objects on my walls without always relying on studs for support.Overall, I'm highly satisfied with the performance of these toggle bolts. They're durable, easy to use, and versatile enough to tackle a wide range of hanging tasks.
594 Tuff
Reviewed in the United States on May 13, 2024
I have a project coming up for my RV and was in need of some small sized toggle bolts that are sturdy enough to hang curtain rods on a thin wall. This kit was perfect for my needs. Not only does it have the small size I needed, it also has two other sizes that I can use in the future for the house as well.All one needs to do is drill a hole that is just big enough for the toggle, insert the screw and toggle into the hole and tighten. Very straight forward process. If your looking for a toggle kit that has a variety of common toggle sizes, this is it.I find the price to be very reasonable and recommend this toggle kit to others.
shea martin
Reviewed in the United States on November 28, 2024
Bolts and anchors seem fine but box was busted to pieces inside the shipping bag. I’ll have to store them in something else which is frustrating.
Harrison Jenkins
Reviewed in the United States on April 9, 2024
At an average of $0.35 per piece these appear to be a great deal for this toggle style wall anchor, but after quality fallout, its closer to $0.50 per piece which may still be worth it for some.This style of wall anchor is quite robust and bites into the back of the panel you are fastening your object to (picture frame, coat hook, towel rod, etc.). The issue with these ones is that the threads (or should I say thread) cut into the toggle part is inconsistent. Firstly, they don't come assembled, so you have to mate them up screw to toggle - I'm glad for this because it forced me to go through a majority of them to check the quality.1/4" size: you get 12 of this size, about 50% threaded in smoothly, about 50% took some convincing, but still threaded by hand. I call this ok, but not ideal. I did keep them all, but made a mental note to install with care.3/16" size: you get 18 of these, the first 5 would not thread past the first thread at all - even with aid of a screwdriver - total fail. Thankfully I persisted and found that about 10 of them failed, but 8 were usable - I threw the 10 out completely as being more trouble than they were worth.1/8" size: you get 28 of these, all of these threaded on pretty easily, so the issue seems to be with the larger sizes; however, I did note that toggles in this size are very light weight.As I said the 1/8' felt light weight so I went in search of the load rating for these - to my surprise, there is none given by the manufacturer. Typically wall anchors will specify the vertical and horizontal loads they are rated for given different types of installation (masonry, gyp board, wood paneling, etc). These have no such indications in the packaging nor in the Amazon listing - should have been a red flag to begin with in hindsight. For me, they will only be used for light loads or non-critical installations.Giving this two stars because even with the fallout, they can be a good value, but there are certainly better options out there with load ratings and no quality issues.