Your cart is empty.
Your cart is empty.WD
Reviewed in the United States on June 25, 2024
Very nice relay. Looks like a good clean quality build. Solid pickup when engaged. Also the Relay had a solid weight to it. Very pleased. Meter readings across the relays was consistent.
Thomas
Reviewed in the United States on February 8, 2024
This review for the SRD-05VDC-SL-C 5V, 10A DC Mini SPST Power Relay in the 10 pack. Upon receiving these and removing from outer container, the package with the relays was torn. It actually was more shredded by the pins on the relays. The seller may want to pack them in a slightly thicker bag in future.As for testing the coils, it seems they are working as expected in my minimal testing. I've only applied 5 volts DC and then flipped them back and forth several times without issue.
Signus
Reviewed in the United States on February 4, 2024
These, at least the ones I received, are Songle relays. They work great for budget relays. The ones I'm reviewing have a 5v coil, with an SPDT actuator. They can draw a lot of ma unless you dampen the coils. In-circuit, I have them drawing barely 10ma, although if you apply 5v directly from a power supply you will notice upwards of 70ma current draw.I wouldnt max out the contacts however. If you want these to last, don't load the contacts beyond 50% of specs. I have the contacts triggering devices drawing 1 amp, 120v (approximately 120W at turn-on). That's going to throw a spark, and eventually oxidize or carbonize the contacts. I believe these relays are best suited for controlling DC imho. A little engineering can help lower that initial spark, extending the life of those contacts.I have nothing bad to say about them. Great deal for quantity 10 imho. Recommended for general hobby, prototyping, and diy.
DC
Reviewed in the United States on February 3, 2024
These are your basic commodity relays - coil voltage is 12VDC, rated for 10A of 125VAC or 28VDC. I checked one out on the bench, and it worked just fine.
Ken J.
Reviewed in the United States on April 10, 2024
Relays function as described. In continuity testing, I found the pinouts to agree with schematics I had found online - simplified photo attached for reference.12vdc applied across the coil pins results in a distinct clicking sound as the contact on NC switches to the NO pin.Ordered these specifically for a 12v circuit I'm working on and will update with further results.
Recommended Products
$65.81
$ 31 .99 $31.99