Your cart is empty.
Your cart is empty.Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.
ryan gruver
Reviewed in the United States on May 3, 2024
This is definitely high-end and exactly what you're looking for the models described in the ad !!! Mine was 85 honda shadow vt700c
David
Reviewed in the United States on January 2, 2022
I ordered this for my 87 shadow. Had everything i need and step by step instructions if you dont know how to do the job. If i had to do another i would definitely use this kit again with confidence
S. Harrell
Reviewed in the United States on July 11, 2021
This kit worked great to let me adjust the jetting on my 1984 Shadow. But I don't recommend drilling holes in the slide. Just change the jets and add a shim or two.
Alex
Reviewed in the United States on April 4, 2021
I have a 1984 shadow 700 that needed some love. I ordered this kit expecting just your bog standard jet set. I was wrong, included in this kit was EVERYTHING to make my bike run better than I thought possible. From drill bits to modify the CV pistons to an extractor screw to remove the plug over the idle mix screw. They even included instructions taylor made to the exact model of my bike with my name on them. Diagrams included. Absolutely recommended
Recommended Products
$39.50
$ 19 .99 $19.99
$39.50
$ 19 .99 $19.99
$59.50
$ 29 .99 $29.99