Your cart is empty.
Your cart is empty.Chelsea Hazle
Reviewed in the United States on February 4, 2025
Did not fit. Not headlights.
David Perry
Reviewed in Canada on February 11, 2025
Lights flicker when turned on says to contact them but no contact anywhere, I called customer support but they were no help
Patty Carter
Reviewed in the United States on November 5, 2024
Nice lights. Very bright and easy installation.
SilverState55
Reviewed in the United States on August 15, 2023
Used these headlights to replace old halogen lamps that would constantly go out. As other reviewers stated, these LED lamps MUST be started initially on LOW BEAMS! If not, just unplug the lamps for several minutes, ensure your High/Low switch is set to LOW BEAMS, then plug lamps back in on LOW BEAMS. Leave lamps on for a minute, then switch to High Beams. After this, mine work great. VERY effective at night, cover a much bigger area than old halogens. Very happy with these, will buy more sets in the future to replace other old halogen headlights.
Sylvia_M
Reviewed in the United States on December 27, 2023
Description says it for 9v-16v. Later in the "compare with other items" section it says 32v. Finally, in the reviews, a customer said it worked with a 24v system. I took a chance hoping the customer review was the most accurate. It was correct. Put this in my HMMWV today. You can see in the picture the standard HMMWV light on the right (typical dull headlamp.. and that's with high-beams on!) and the new light on the left (so bright!). I did have to buy an adapter to go from HB2 plug to military 12AWG rubber plugs.I will note that either these lights are wired wrong or the adapter was, because ground wound up being blue instead of black. So just pay attention to the picture of the HB2 plug pins, the pins are labeled correctly, then just make sure those associations follow to your final connection.
Dean
Reviewed in Canada on September 8, 2020
Finally put these LED headlights in and not bad at all to install. In Canada, we require DRL, and so these lights are equipped with an additional wire for that. You’ll need to do the wiring to the fuse box yourself, or do what I did, and bought one on Amazon, works great. Now, my only issues are, a very slight flickering which from what read is a hit or miss, these missed. No information on how to contact the company to arrange for the anti flicker harnesses. The second minor issue is, the first time checking the DRL, the top and bottom row lit up. That’s what is supposed to happen. Later tonight, all lights were on but dim, so not a big deal as they looked like DRL’s. Then again later tonight, only the top and bottom row were on before turning full lights on. Again, another hit and miss. Very bright and very happy. Now if only the company can reach out to help with the anti flicker? All will be golden.
Nick Lascaro
Reviewed in the United States on July 1, 2020
100% worth the money! EASY install, plug and play, perfect fit, etc. The brightness is that happy medium between a Coast Guard search light and a candle. The low beam pattern has a nice cut off and can be adjusted to be even and lower/higher. The high beam was shockingly well formed. It basically shines a perfect circle about 40 yards ahead. Most aftermarket leds just throw light every direction but these dont. I opted not to connect the DRLs because I could care less. But I did test them, and they work perfectly! Check my pictures and see for yourself!
Steve-o
Reviewed in Canada on August 3, 2019
Very good lights! Made my Jeep TJ looks good during the day and see good during the night. Used for over a month now and no issues. DRL lights work normally off the original plug, no need for extra wiring unless you want the small LEDs on top and bottom of the lights.
Paul
Reviewed in Canada on July 6, 2019
Every step of this installation has been great...They were plug and play and look fantastic.I did have a minor flicker issue...reached it to customer service who replied quickly and helped me through the process. This kind of service is rare in person but even more rare over the internet!If I could give a 6* rating I would, as the customer service alone would merit it.I look forward to my next purchase!!!
Bob
Reviewed in Canada on May 14, 2019
Easy re and re for 98 jeep tj just plug in , way brighter than old headlight unhooked factory drl and wired led drl light to ignition. They look awesome. Low beams a flood light and high beams a spot light when switched to high beam they both stay on . Unlike some LEDs. Been running for two years now still going
gpike
Reviewed in the United States on March 12, 2018
I needed to replace the headlights in my 08 Jeep Wrangler because they we getting fuzzy from road debris. At the same time I wanted more light, as the factory bulbs were weak at best. These lights appealed to me from the 130W output, and the price point. Installation was easy with the line up tabs landing in the right spots. Make sure you check that the female spade connectors are fully seated with in the adapter block, on one of mine it pushed the ground wire out. Removing it and seating fully in the block cured it.I installed one light and then checked against the factory lamps, and the difference was remarkable.Driving with them took a bit of adjustment, when I first turned them on at dusk they didn't seem all that bright but go better as it got darker. I believe this was a matter of perception. With standard headlights, the yellow color is easy to see how far out they are lighting. These lights provide a very white light, with no marked edge at dusk especially on low beam. The high beams are incredible. Amazing. Awesome. Like a previous review stated its as though a searchlight is mounted on the front.One slight problem I had was at idle, the lights would flicker like a strobe, never going out but the variation was annoying. An email to COWONE provided the answer in the form of a CAN adapter for H4 bulbs. A little research indicates that this is a problem with all Chrysler Products converting to LED headlights. Once installed the problem went away. A big plus to COWONE for providing an easy fix quickly.In the end I am very happy with these headlights and would recommend them.
Nik
Reviewed in the United States on January 17, 2018
I purchased these and installed them onto my 13 JKU. The fit was perfect and the install was a breeze. They look fantastic (recommend painting your Jeeps light bezel ring black to match though) and are much brighter and durable than OEM headlights. These headlights throw a wider, brighter light compared to OEM and really make driving at night easier (on or off road). You may need to adjust your headlight angle down a bit as I did to make sure you don't blind other drivers. This kit allowed for a simple plug and play hook-up without the day time running connected. If you want to hook up the daytime running lights, and your vehicle does not have a factory day time running wire already, you will have to splice the daytime connection in, but it is not required for operation. I have only had these on for a few days, but can tell you already that they are well worth the purchase. If I run into any issues down the road I will be sure to update this review, but for now, 5 stars. Photos to come.
Kurt
Reviewed in the United States on December 6, 2017
If you're buying these for a Jeep jk you will need "anti flickers", every jk does. Great headlights for my Jeep jk. Good brightness, 10x stock lights. Low beam is a bit different, real wide, short pattern. Not the best "cut off" which makes it difficult to adjust. High beam shoots straight down the road. I drive a lot of one lane roads so I like the wide pattern of the low beams. Plugs these came with I had to trim to get to fit properly. Contacted seller due to horrible flicker. They did not have any anti flickers in stock so the refunded me the cost so I could order my own.Somaer 2x H13-To-H4 Anti-Flicker worked great. Only time will tell on longevity but very happy atm.
Recommended Products