Your cart is empty.
Your cart is empty.Product Description
Fedor Paramonov
Reviewed in the United States on July 30, 2024
I have a RAM 2014(Classic) with Rambox and Syneticuse cover with t-rails. It fits perfectly!I love the attention to detail - it has t-slots everywhere and even end caps for top rails has hookup holes. Amazing thing!
Richard Haaser
Reviewed in the United States on May 14, 2024
Solid product which came well packaged. Hardware was also well labeled and packaged with extra pieces for redundancy. Instructions were clear enough. Like many, I had to reposition pieces several times to get proper fit but that was by no means disqualifying. For me this product will help compensate for the smaller bed of the Ford Maverick.
Kyle Wellsby
Reviewed in the United States on November 28, 2024
Would not fit on the rails I bought. Seller won’t take this back would like refund. Quality is cheap and junk hardware is included.
JT
Reviewed in the United States on August 9, 2023
After doing extensive shopping I decided to take a shot at this bed rail.First of all, I have a 2023 Ford Maverick with spray in bed liner and retrax one xr tonneau cover. I did reverse the base so it would fit over the tonneau rails but it looks super nice.Quality and ease of installation are pretty good. The only bummer is there is a little damage here and there, but as this is a work vehicle and I'm sure the bed rack will take some damage anyway over time. For 50% of the cost of the big name brands I couldn't be happier!
Chris
Reviewed in the United States on July 22, 2023
This is a great rack and the best value on the market I could find. The welds are perfect and assembly is a breeze. I didn’t install it as intended because I needed it to install into the t-slot tracks on my bed rails. It was easy to adapt for that and is incredibly stable and strong. Stop looking and get this thing, you won’t find a better one for the money.
K
Reviewed in the United States on July 12, 2023
The rack does not worth this money. First of the rack itself suppose to be assembled using screws BUT, all of them are got loose with vibration! And believe me i know how to tight them and what is the mechanical engineering. I already lost about 5 of them, so be ready to buy more on regular basis. Another thing is the wrench which goes with racks doesn't match the screw size, haha what a joke. So shop around and do not repeat my mistake.
Derek Zoolander
Reviewed in the United States on April 29, 2023
Overall I’m happy with this but there are some significant issues on installation:1) I needed to grind down some irregularities from the machining process. If I didn’t have an angle grinder this would have been impossible to install (maybe you could use a file but that would be really tedious). See pictures attached, it may look insignificant but the tolerances as tight enough that it wouldn’t fit without grinding this down. This isn’t really reasonable for a new product, but I decided it was a better option to sending it back.2) Instructions are horrible , I’m written by somebody who either doesn’t really speak English or has never used hardware before (or both). This isn’t uncommon for stuff like this, but make sure you’re the kind of person that’s ok with not having instructions. I forget what they called the washers and lock washers but it was kind of funny.3) Some parts come slightly assembled, but pieces came loose in shipping and some bolts took some searching to find.4) THE CENTER BOLTS ON THE VERTICAL STANCHIONS NEED TO BE LOOSE FOR THE TOPS TO SLIDE DOWN. There’s no mention of this in the instructions and I noticed it after assembly, not a huge deal but added 20 minutes or so.5) No torque values are provided for the assembly hardware. Given that the frame is aluminum, that’s a significant issue. That said, the hardware is steel so I tightened everything to “TLAR”, and it will probably be fine.6) You’ll end up with A LOT of extra hardware.7) If you were to follow the directions where it tells you to use the large washers on the C clamps for the bed rails, your most likely strip or cross-thread a few bolts or nuts. Those washers are simply too large for the clamp. I chose to not use them, or you could go but smaller outer diameter washers.8) I’d highly recommend reading through the entire set of “instructions” understanding that they’ll be less than ideal. Then gather all the parts in the bed of the truck and assemble them logically, referencing the pictures in the directions for orientation if needed.In the end, compared to the price of the other high end racks, I think this one is a good value if you’re OK with these issues. Even with those hiccups it was still less than 2 hours to install by myself. Highly recommend an impact driver rather than the included Allen key, but it’s convenient they include one.The included finished picture is at the lowest height setting on a 2020 Ford Ranger. A flat object placed on top will still clear the cab. It’s solid, I’d have no concerns with loads up to the stated capacities.
SASQUATCH
Reviewed in the United States on August 15, 2022
UpdateAgust 2024...This has been on my F150 for two years now and I don't like it anymore. The aluminum and the paint are still in excellent condition but because it is not really adjustable hight as they claim, I have to remove the 200lb roof top tent every winter and put it back again every spring. That sucks. I bought it cause it was adjustable but if you lower it, the rails do not line up on the bed anymore so I'll have to buy another. I have one on the way in the mail. Also, used it off road and all the clips holding it on fell off. Yes, all clips holding it on fell off. Now I have them screwed on and zip tied together. I think if you keep these fully extended they will work well for a kayak or ladders but nothing for off road or even a RTT. Because I have to buy another brand now, I am changing my 5 stars to 1 star. You might have better results than me.I did not want to spend $800 or more for an adjustable aluminum bed rack so I tride this and was surprised. It seems to be built strong, made of aluminum and I nice paint job. It seems to be holding my smitty xl RTT at its minimum hight just fine. Haven't tried it off road yet. FYI, mine is 19" tall at minimum hight on my F150. For the price I would tell a friend to try this before getting a more expensive one.
Recommended Products