Details

Carburetor: The 80cc gas bike kit will adjust the mixing effect according to the different working conditions of the engine, to ensure the normal operation of the machine.

Specification

Materials: Aluminum, Iron, Rubber

Process: Lathe Machining, Spray Painting

Engine Type: 2-Stroke Single-Cylinder Gasoline Engine

Heat Dissipation Method: Air Cooling

Start Method: Foot Pedal Start

Applicable Brake: V-Shaped Brake, Clamp Brake

Clutch Type: Manual

Drive Position: Front Wheel

Ignition Method: CDI

Spark Plug Model: Z8CM14 × 1.25

Fuel Type: 90 # Gasoline

Fuel Oil Mixture Ratio: 16:1 (New Equipment), 20:1 (After Driving 500km/310.69 Miles)

Fuel Consumption: 2L/0.53gal/100km/62.14mile

Chain Wheel Teeth: 44 Teeth

Spoke: 36

Number of Chain Teeth: 110

Displacement: 80cc

Horsepower: 2.58hp

Torque: 4N.m

Engine Power: 2.1KW

No Load Speed: 5000RPM

Maximum Speed: 38km/23.61mile/h

Fuel Tank Capacity: 2L/0.53gal

Suitable Bicycle Wheel Size: 85.3-91.86cm/26-28in

Engine Size (LxH): 23x24cm/9.06x9.45in

Net Weight: 11kg/24.25lbs

Notes

1. Please read the operation manual in full before use. And pay special attention to the included safety instructions.

2. This product needs to be installed in the middle of the bicycle tripod, so please pay attention to the size of the triangular space on the frame.

3. Before starting, this product does not require adding additional oil to the machine. After using it for a period of time, apply some solid grease (not included) on the gears inside the case. Please use the two-stroke engine oil (not included) in the fuel tank to mix the fuel. Please store gasoline, engine oil and mixed oil (not included) in a safe container, and do not add near heat sources or sparks. Please turn off the throttle before parking.

Details

Carburetor: It will adjust the mixing effect according to the different working conditions of the engine, to ensure the normal operation of the machine.

Specification

Materials: Aluminum, Iron, Rubber

Process: Lathe Machining, Spray Painting

Engine Type: 2-Stroke Single-Cylinder Gasoline Engine

Heat Dissipation Method: Air Cooling

Start Method: Foot Pedal Start

Applicable Brake: V-Shaped Brake, Clamp Brake

Clutch Type: Manual

Drive Position: Front Wheel

Ignition Method: CDI

Spark Plug Model: Z8CM14 × 1.25

Fuel Type: 90 # Gasoline

Fuel Oil Mixture Ratio: 16:1 (New Equipment), 20:1 (After Driving 500km/310.69 Miles)

Fuel Consumption: 2L/0.53gal/100km/62.14mile

Chain Wheel Teeth: 44 Teeth

Spoke: 36

Number of Chain Teeth: 110

Displacement: 80cc

Horsepower: 2.58hp

Torque: 4N.m

Engine Power: 2.1KW

No Load Speed: 5000RPM

Maximum Speed: 38km/23.61mile/h

Fuel Tank Capacity: 2L/0.53gal

Suitable Bicycle Wheel Size: 85.3-91.86cm/26-28in

Engine Size (LxH): 23x24cm/9.06x9.45in

Net Weight: 11kg/24.25lbs

Notes

1. Please read the operation manual in full before use. And pay special attention to the included safety instructions.

2. This product needs to be installed in the middle of the bicycle tripod, so please pay attention to the size of the triangular space on the frame.

3. Before starting, this product does not require adding additional oil to the machine. After using it for a period of time, apply some solid grease (not included) on the gears inside the case. Please use the two-stroke engine oil (not included) in the fuel tank to mix the fuel. Please store gasoline, engine oil and mixed oil (not included) in a safe container, and do not add near heat sources or sparks. Please turn off the throttle before parking.