Your cart is empty.
Your cart is empty.Product Description
What's Included?
- RinoGear film
- Microfiber cleaning cloth
- Installation assist card
- Detailed instructions
"Move to a Higher Gear."
RinoGear is the internet's leading manufacturer of screen protection products.
RinoSkin Series Screen Protectors (by RinoGear)
We create protective phone and tech accessories to fit your active lifestyle. Whatever kind of fitness activity you’re into, we’ll be there to support your tech gadgets with the proper ‘gear.’
We at RinoGear are big fans of active fitness and technology. We want you to be able to embrace that extra mile without having to worry about your tech!
Why Protect Your Screen?
ALL Screens Get Damaged - Despite the grade of glass, screens still scratch or get damaged. Even so-called unscratchable glass still get scratched. Our tests have proven that no type of screen is invulnerable from damage.
Damage Comes From Anywhere / Anytime - New tech devices such as smartwatches or phones are expensive. Even placing it in a pocket or purse can ruin it. Don’t risk damaging your tech by not protecting it.
Tested Under Harsh Conditions
Our screen protectors are put to harsh and extreme conditions by runners, hikers, cyclists, etc. Protects from wear & tear even if you’re not active.
It's Simple Screen Protection for ALL
We design our screen protection products to be able to handle active lifestyles - which means proven toughness that everyone can benefit from!
Error-Proof Installation
Installation is done by "wet application" which allows you to re-position the film as many times on the surface unlike typical screen protectors.
C. McC
Reviewed in the United Kingdom on May 19, 2022
I have scrubbed and scrubbed my hands and the screen and no matter what I do they go on perfectly seem to seal all round and then a few days later start to peel up at the corners.
LP1205
Reviewed in the United States on January 25, 2021
Installed 2 of these on different devices in my house. The instructions were easy to follow. One went on easily, the other did not. If the edges don't stick immediately, wait 20 mins and try pushing it down again. I'm happy overall to protect the screen and it does hide any scratches/cracks, but the letters and images are now pixelated...not the worst, but for the money, not terrible. Hopefully the adhesive doesn't ruin the glass coating when I attempt to change it. So far it's been on for 24 hours, and I've used my charger without it coming off. I recommend waiting the full 8 hours after install before wearing the device. If you are planning to use these on a charge 2, trim off a sliver since the charge 3's screen is a bit bigger.
BDR
Reviewed in the United States on May 31, 2020
I have purchased the Rinogear screen protectors for my Fitbit Charge 4 and my Fitbit Inspire 2. Installation is quick and EASY. The screen protectors fit PERFECTLY!! NO bubbles and NO lifting edges. NO damage to the screen protector from the charger either.The material is a soft TPU, and over time, it will become marred. I am pretty hard on my fitness trackers, and find that the Rinogears last about 3 months before I need to replace them. (I do wear my tracker just about 24/7, but do not shower or swim with it.) I have tried other brands, but their installation was not as easy, and the edges tended to lift after a few days. Not so with Rinogear!You get 8 protector in one pack, and replacement takes no time at all! Plus - the price can't be beat!I highly recommend these screen protectors.
Lee’s Summit Girl
Reviewed in the United States on May 27, 2020
So I read all the reviews for the different screen protector options available for my new Fitbit Charge 4. All of them seem to have some negative comments so I ordered two types/brands. I waited more than a week before attempting to apply for concern of it being difficult to apply but finally watched the video & thought how simple, why did I wait? I would definitely watch the video it tells you exactly how to find the video & explains step by step instructions well. I followed the instructions as shown and had absolutely no issues. I will say I checked it about 8 to 10 hours after applying & I did see a couple of air bubbles, they were not bad but would irritate me if they remained but I let it sit as instructed and after 24 hours they were completely gone. You really can’t tell that it’s on. It’s perfectly clear, aligned perfectly & looks just like original screen. I’m about 2 wks (or close to) since applying & so far It’s perfect. No complaints. Go for it, you won’t be disappointed! I will say when you charge it you have to make sure it’s positioned just right but think it may be more of how the Charge 4 is designed vs. because of the screen protector but it will charge & not a big issue.
Frank Boston
Reviewed in the United States on July 17, 2019
We purchased this 8-pack because there are several Fitbit Charge 3's in our family.We had no trouble following the easy video installation instructions. (We have used similar screen protectors in the past for smartphones and tablets.) The screen is clearly well-protected, and there was no reduction in the responsiveness of the touch screen. There was no problem removing the few bubbles or positioning the screen protector.However, after following all directions carefully, a slight haze remains across the center of the screen protector. I had hoped this would be gone by the next day. It has now been several days. Since this was an 8-pack, we'll try again with another to see if this behavior is due to a problem with just this one. My wife claims it's not a big deal, and doesn't interfere with her use of the Fitbit. I, however, would be bothered by it every time I looked at it. (Lol.)____________________________________EDIT AFTER APPROX 1-2 MONTHSIt's a good thing the package came with 8 of these. The first one applied just came off. Since it had a slight haze anyway, we discarded it and replaced it with one of the others in the pack. During the time the first one was on, the haze never went away. My wife was not unduly bothered by it, and figured it was worth it so that the Fitbit wouldn't get scratched like her previous one. The haze problem isn't visible on this one; it looks great!
lovestoread
Reviewed in the United States on May 8, 2019
This went on great. I wet my fingers prior to the screen so it would go on easier without smudges. Dried relatively quickly. The charger as is will affect the quality and it will start to bubble up. Fortunately all you need to do is make it so the charger doesn't touch the top of the screen. It can still charge. I personally use the extra strap holders that came with the knock off bands (I don't like 2 holders and they slide right off) and put it on the tip. Holds the charger in place and charger doesn't touch the screen.This type is great but if not installed correctly it will lift off unexpectedly. So if you see any corners looking funny or the screen hangs over the edge, it will come off. I got mine on the first try but I'm used to wet installs.
Chris
Reviewed in Australia on May 8, 2019
Mainly due to size, a little fiddly to install, otherwise works well.
Hannah
Reviewed in the United States on January 20, 2019
Great product and great value. The installation was a lot easier than I expected; I watched the installation tutorial video before starting and made sure I let it dry completely for several hours before putting the watch back on. I also took the wristband off during installation, which made it easier to lay the Fitbit flat. I've had this protector on for several weeks now and have had no problems with it peeling at the corners. I wear my Fitbit to sleep every night, wear lots of sweaters that rub on the watch, and wash it daily, and the protector has withstood all of this. The protector is crystal clear and practically invisible on the watch face unless you're really looking for it. My only complaint is that it does have a little more drag than the naked screen did, but this is such a minor issue that I'm very satisfied with this product.
Recommended Products