Your cart is empty.
Your cart is empty. Feature:
Eliminate noise
Stabilized power supply protection
Installation Method:
1. In order to achieve the best results, the capacitor should be installed as close to the power amplifier as possible, and the short power cord should be used as much as possible. At the same time, the capacitor should be installed in a place that is not easy to reach, and to a certain extent isolated from the heat generated by the power amplifier.
2. The power cord should be as short as possible. It is recommended to use a dedicated wire distribution socket to connect the battery circuit. Do not install the fuse between the capacitor and the power amplifier. But make sure to use an appropriate fuse on the main supply cable of the battery to protect the power supply line.
3. The negative connection of the capacitor should be as short as possible and directly connected to the bare metal cable of the car chassis. Do not connect the negative terminal of the capacitor directly to the negative terminal of the power amplifier or the negative wire.
4. The power cord of the capacitor should have the same GA number as the power cord of the power amplifier. It is recommended to use the high-performance OFC wire of 8 or 10AWG
5. If the capacitor is with a control wire, use 18-20AWG main wire to connect the control wire of the power amplifier and connect one end of the control wire to the automatic antenna connector of the car audio.
Please be very careful:
If the power capacitor is abused or connected improperly, it may cause an explosion and cause injury. When installing the capacitor, please refer to this instruction for proper connection and charging/discharging. Do not install power capacitors under direct sunlight or extremely high temperatures.
Packgae Include:
1x Car Audio Capacitor
Christopher
Reviewed in the United States on January 16, 2025
The media could not be loaded.
Recommended Products
$94.50
$ 41 .99 $41.99
$143.35
$ 56 .99 $56.99