Your cart is empty.
Your cart is empty.Product Description
Cimcame 90 Gallon Abrasive Blast Cabinet
STURDY STEEL CONSTRACTION
This sand blaster is made of heavy-duty cold-rolled steel with powder coated finish that can resist rust and corrosion. The support frame consists of 4 sturdy legs and 4 top & bottom reinforcing beam for stability.
IDEAL SURFACE TREATMENT
Cimcame sand blaster can perfectly handle the paint, rust and oxidation of the surface of a workpiece, suitable for the high-density surface treatment requirements.Maximum operation pressure:40-120 PSI.
EASY TO ASSEMBLE
Come with a detailed installation manual.You can finish the assembly within 1 hours.There is a video for guidance as well
Product information
- Maximum operation pressure:40-120 PSI.
- Size:34.5*22.4*54.3 Inch
- Capacity: 90 Gallon
- Material:Cold-rolled Steel
- Working Space:32.5*21.3*21.5 Inch
- Viewing Window: 25.4 Inch X 13.4 Inch
4 EXTRA NOZZLE+LARGE GLOVES
Equipped with blasting gun kit, 4 pcs replaceable ceramic nozzle(4.5/5/6/7mm), and oversized rubber gloves for operating the blast gun
TOP ACCESS DOOR
This free standing sandblaster is equipped with 18.7*28.7inch top access door for easy entry and exit of your workpiece or cabinet cleaning
LED TUBE
Oversized viewing window with built-in LED tube for better visibility. Removable plastic film（4 pcs） to protect the glass from corrosion.
MJC
Reviewed in the United States on August 28, 2023
Just a quick review of the machine. The company may need to do a better job packing it as the metal had damage. I was able to hammer it all back out. The strut brackets were spot welded on, 1 was loose in the box,I chose to rivet it back on, and I went ahead and riveted the other 3 because a weld on the other side broke while I was assembling the unit.The machine comes COMPLETELY apart,You install every screw. time consuming. I upgraded to a better air hose that was a bit longer.So there is the negatives,BUT, once finished, the machine is sturdy,steady and works well. machine seals when the lid is shut as the vacuum pulls the gloves up .If you look at the 3rd photo,you will notice I installed wheels on the bottom , get sturdy 1's with brakes for the 1's facing the front, you can roll it out from the wall and all over the place easy.The particular seller I bought it from, was friendly,helpful.
ezedude
Reviewed in the United States on August 25, 2023
Time will tell. Fairly sturdy considering it’s low price. Be prepared to spend a day or 2 assembling. And get a helper as the box says it’s 51 KG but it’s closer to 65. They give you Gray silicone with the kit, Throw it out its junk and never sets up correctly. Get a big tube of clear at the depot and use it liberally on all seams . You will want to silicone the lower portion of the collection box by the trap door on the bottom of the unit as it has weatherstripping, but I wouldn’t count on it to seal correctly…... Overall a great value. Works so far.
Donald Muzzy
Reviewed in the United States on October 29, 2023
First off I've put together multimillion dollar freeze dryers. Equipment that costs several thousand to several hundred thousand with no Manuel's and never had so much of a hard time putting something together as I did with this thing. This project will take you a few hours guaranteed. Instructions are very vague. It's like it was written by a person who had 30 minutes left of their shift on a Friday. One picture shows a part on one spot, the next in a different spot. It's a guessing game with hardware to. Unit is also shipped as cheap as possible. Only the Plexiglass window is protected. The rest of the metal pieces rest on one another causing multiple scratches and a bracket to break off during shipment.On the plus side it's pretty large. With a couple modifications it's a very good unit.
Craig Fochtman
Reviewed in the United States on October 24, 2023
I would have rated this higher. It's a sandblast cabinet, no sparklies in use. But the instructions are a joke. I am an Electrician & my Buddy who this is for is a mechanic. I would rate our combined mechanical aptitude right up there. We had to look at the pictures for the product on Amazon to see where some of the stuff went. They sell this with a dust collector, it's cheaper to buy separate. We will probably add that soon. De rusting is epic in these things, we could only get 100 grit Metal Oxide powder, we will get 60 grit next time. It arrived a little beat up but nothing we couldn't straighten out. If we were to do this again we would probably spent more on it. This was an experiment for us, it's fun to use & does what it was designed for. It has some leaks we had to chase down which is be expected. Do NOT use the silicone or Teflon tape. All & all, I'm glad we got it. For the price, I would rate this a value.
Recommended Products