Your cart is empty.
Your cart is empty.Product Description
ABN Aluminum Socket Rack Tool Box Socket Organizer with Clips
If you notoriously lose sockets, get organized with the ABN Aluminum Socket Rack Tool Box Socket Organizer with Clips.
- Available individually or in 3 pack.
- Available in black, red, blue, orange, green, and yellow.
- Clamps and aluminum rail included; drive sockets not included
A Closer Look
MADE FOR ORGANIZATION
You can organize your toolbox, mount on a wall vertically or horizontally (1” x 0.2” / 25mm x 5mm keyhole slots), set on your workbench, or store in a drawer.
The 17” x 0.82” (43cm x 2cm) socket organizer rail is made of aluminum while the socket holder clips are constructed from heavy-duty plastic.
The 16 included clips on each rail contain spring-loaded ball bearings for a secure hold – even upside down, and the clips can be used on both sides of the rail for double-sided use.
Available Sizes:
- 1/4" Drive Socket
- 3/8" Drive Socket
- 1/2" Drive Socket
- *3-pack includes all 3 sizes
Efficient Organization
Keep your sockets organized and easily accessible. Socket rails provide a designated spot for each socket, allowing you to quickly identify and retrieve the socket you need without having to rummage through a messy tool box.
Improved Workflow
Streamline your workflow by neatly organizing easy to lose sockets. Save valuable time by organizing your sockets in an easy-to-find manner.
Portability & Convenience
Socket rails are designed to be portable, allowing you to easily transport your sockets from one location to another. Conveniently carry your sockets wherever the job takes you.
Extra Protection
When sockets are loose or stored haphazardly, they can easily get damaged. A socket rail provides secure and protected storage for your sockets making sure your tools stay functional.
Who We Are
We're not just a supplier of automotive supplies, but a partner in passion. At ABN, we know what car enthusiasts and mechanics need because we're right there, working on our own vehicles. We cover a wide variety of automotive needs that are tried and tested on our own projects.
Jb
Reviewed in the United States on October 24, 2024
Nice long aluminum rails easy remove plastic socket holders
golfunit
Reviewed in the United States on May 10, 2023
This item worked perfectly for the 1/2" socket set I had. Instead of stuff rattling around in my toolbox, all the sockets have a nice, secure home. Well done
silverado98_nighthawk84
Reviewed in the United States on May 24, 2022
Wanted aluminum rails and not plastic. Very happy with these. The detent ball is very strong and holds sockets firmly. I like to grab a rail and take it to what I'm working on. I also like that you can easily add more socket holders if you have space, along with mixing and matching sizes (comes in handy if you want to make a rail of torx or hex/allan bits which are often various drive sizes). Have bought several sets and won't hesitate to buy more when needed.
うちなんちゅ
Reviewed in Japan on April 29, 2022
もっと明るめの色味とは思いましたが概ね満足です！ただ、4700円位のものですが海外発送で送られてくる際にドル表記されて、関税❓の所で税金35000円くらい取られそうになりました❗️関税の方から連絡があって発覚したので購入明細のスクリーンショットや商品の画像等を送って事なきをえました、皆さんも注意しましょう
John Hoke
Reviewed in the United States on December 10, 2020
These things work great for sockets and accessories. They keep everything organized and in place. Plus with them being metal, they are very durable. I keep one of these in my tool bag with deepwell sockets, and they don't fall off. I did have to add a bolt to each end of the rail to keep the holders from sliding off. But that was an easy fix and worth it for the trade off.
JHeezy241
Reviewed in the United States on October 30, 2020
Worked surprisingly well. Holds my 13 piece deep, heavy duty impact sockets very well. I even held it vertical and upside down for a few seconds and they never fell off. I don't know if I'd store it that way permanently, but it's a great looking, good quality product. Well worth the money at that price point.
killeRooster
Reviewed in the United States on October 10, 2020
Exactly what I needed for my harbor freight impact socket set. So many of those crappy, thin, sharp socket rails don’t hold bigger sockets, especially impact sockets; but these socket rails truly surprised me. They’re thick, sturdy, and can be stood upright. The ball bearings hold the socket in place, yet allows for you to remove it without much force. I included a photo of me literally holding the rail upside down... not one impact socket fell off, even after shaking the rail up and down! Bear in mind that these impact sockets weigh a few pounds!I am thoroughly impressed with these rails and it has far surpassed my expectations. Aside from being everything I needed for practicality, the rails have a beautiful finish and are very nice looking. Too bad they’ll be ruined from work eventually!As I read from another reviewer, I did put zip ties on the ends of the rails to keep the sockets from falling off (the rubber end caps are really just for looks and do nothing to stop a sliding clip). That’s my only “complaint,” if you can even call it that.I like the fact that each rail comes with so many clips. After fitting my entire set on the rail, I had 3 clips remaining. All the rails and clips are the same size so you can interchange them and have more than one drive socket on the same rail.Some reviewers commented on a high price... When compared to garbage, sure they cost a few more bucks, but it’s well worth it. I didn’t think twice about these, and neither should you. “You get what you pay for” really holds true here.
James Stone Rd
Reviewed in the United States on June 16, 2019
The set contains all three sizes 1/4, 3/8, and 1/2" drive. The rail itself is very sturdy and made of aluminum with rubber caps on each end. The clip itself is made of plastic with a steel roller ball to hold the socket in place. They can be customized to your needs by adding or removing clips and if needed can be mounted to a wall or toolbox. If a clip should get to where it doesn't hold a socket anymore there are replacement clips available.
Caribou60
Reviewed in the United States on September 1, 2018
Over the years I've had just about every type of socket organization system ever made. Prior to these I spent quite a bit on Ernst Manufacturing's stuff. For the most part I hated them. The problem is their clips just don't work. I tried the regular, the HD and the twist on clips. To be fair the twist clips DO work, but in my opinion they're a PITA. For bigger sockets, they're ok, but for the smaller ones and when your hands are oily and sweaty or you maybe only have one hand free - forget it, too much work.So I've long been looking for something better. The requirements. Got to have at least 3 colors to differentiate between metric, sae and other. The bars themselves must be at least 16" long and be able to be cut to custom lengths. Of course the clips must be available in 1/2", 3/8" and 1/4" drive sizes. Finally and MOST importantly the damn clips have to hold the sockets securely enough that when I grab a handful of sockets and lift, the whole holder and all the sockets come out of the drawer together in one piece - at the same time they can't hold so tight that getting individual sockets on and off their clips requires TOO much effort. These holders pass all the requirements. Crimp one factory end of the bar with a pair of diagonal pliers, just enough to keep the last clip from sliding off that end. Cut the other end to length with a hacksaw and slide on whatever combination of 1/2", 3/8" and 1/4" clips you need, crimp that end, then slide the vinyl cap back on to hide the cut. Viola, you're done. I leave the vinyl cap off the uncut end and I crimp both ends to ensure the clips can't slide off the bars. Even holding a bar upside down, I've never had a socket fall off a clip from its own weight (line up the hole in the your impact sockets with the ball bearing on the clip). Now the truth is, I don't work my tools as hard as I used to so maybe I'm not the one to testify to the durability of these clips. I will say that by the time I bought enough bars to hold all my stuff I have quite a collection of extra clips so unless they all break at once I should be covered, well, for the rest of my forever anyway. Now there's a bunch of these out there sold by ABN and others (my purchase decision was based on a combination of price and availability). They all look the same to me and I'd be surprised if they're not all coming from the same factory. True or not, the variety and interchangeability of these parts (as testified to in other people's reviews) gives me a warm fuzzy that these will be around for awhile. Ok, they're a tad pricey but they WORK! Get whichever ones you prefer and enjoy, I thoroughly recommend them.
Recommended Products