Your cart is empty.
Your cart is empty.You want excellent quality for your drawer slides and Accuride's Center Mounted Slide 1029 is one of the best. With 3/4 extension, center mounted and load bearing capacity 35 lbs. A concealed undermount slide for small shallow drawers in lightduty applications and the slide is recommended for drawers up to 16" wide.
Robert Barnes
Reviewed in the United States on January 11, 2025
The drawer slide worked great and arrived quickly
Charles Watt
Reviewed in the United States on April 30, 2025
Works as intended but had to guess a bit at the installation. Is a bit stiff in sliding open and shut but might smooth out as time goes on.
Customer
Reviewed in the United States on October 10, 2022
I used two drawer slides for a kitchen drawer that holds a lot of fairly heavy items. Fairly easy to install and super sturdy.
Charles G Corbin
Reviewed in the United States on May 20, 2021
My house was built in the 60s and the kitchen doesn’t appear to have been updated since then so the drawers all use old metal track with nothing more than a metal peg to to guide the drawer and they make a horrible screech when opening or closing. I got this to try and replace the old existing drawer “slide” and this was the only one i found that extended to 2 feet. These slides ended up being an extremely easy almost drop in replacement for my existing drawer slides with the only issue being the screw towards the back of the drawer on the upper slide part was supposed to line up with the wall of the drawer and my drawers are odd dimensions. I bought one as a test but it went so well I will probably be buying enough to do the rest of the kitchen. If you have deep old kitchen cabinets with under mount drawer slides these work great
Alyssa Peters
Reviewed in the United States on February 24, 2021
Easy to install and it fit my needs but I needed two of these slides so the drawer didnt rock side to side. When there was just one slide it also bowed towards the ground when fully extended. I also found them elsewhere for more than half this price.
Frank Alameda
Reviewed in the United States on July 4, 2020
This product is a complete piece of junk. The instructions do not even tell you to install a screw into the cabinet rail at the front edge. If you do not add a screw in this location, when you pull the draw out the rail will completely dislocate from the rear bracket. You will also not be able to insert the drawer fully unless you replace the afore mentioned screw and the screw at the front end of the drawer box with a flat head screw. The provided pan head screws run into each other as you push the draw in, preventing it from closing fully. Good luck trying to insert the front screw into the frame unless your drawer box is as tall as a screw driver, not likely, since you will not be able to insert this screw fully, leading to the same problem of both screw heads hitting and not being able to close the drawer full. Finally, even after the additional screws you need and after investing about an hour of your life to install the slide, it doesn't run very smoothly. The ball bearing do absolutely nothing to help the slide, in fact, i have older wheel type slides from decades ago that function much, much, better. Don't waste your money or your time. Do NOT buy this!
Mooney720
Reviewed in the United States on October 9, 2020
Used these for small 15" kitchen drawers I made to replace a 32" drawer that was broken. Worked great, although the weight of the silverware container in the drawers on the slides does better when the container is situated to the back of the drawer. Used some silicone grease on the slide before putting the drawer back in to make sure the ball bearings were smoothe, and that worked great. Overall pretty easy to install if you have some good carpentry skills. I didn't have any special tools and was able to do it alone with creative solutions like using packing tape to grip the back of the cabinet and still be adjustable while setting the slide to be centered and leveled before permanent attachment with the screws.
J. Williams
Reviewed in the United States on August 16, 2017
I used these drawer glides to replace 30+ year old glides on a desk my father made for me. They are very well constructed and easy to install for someone who is handy with tools. I especially like the fact that they have no mechanical release mechanism. The friction only approach is so much easier to use than any mechanical system I have ever dealt with. The ball bearing mechanism makes them open and close smoothly. Love them!
Recommended Products
