Shopping Cart

Your cart is empty.

Your cart is empty.

AceCrew Electric Solenoid Valve 1/4 inch NPT 220V, 240V AC Normally Open - flow control valve for gas, air & water

4.5 (1) Write Review
Free shipping on orders over $29.99

$25.98

$ 12 .99 $12.99

In Stock

About this item

  • AceCrew Industrial grade Electric Solenoid Valve Normally Open
  • Size 1/4 inch NPT thread ,Voltage AC 220V, 240V
  • Brass inlet & outlet NPT Thread , easy to install with 2-way 2-position direct lift diaphragm
  • Normally Open operation for gas and liquid flow control. Valve will close when energized. Suitable for operation systems that requires constant flow of fluid, gas & water in irrigation , gas activated and automated equipment , HVAC systems Flow rate Cv = 0.5 ; Unidirectional (indication on brass body)
  • Pipe Size : 1/4" NPT Female (18 TPI) . Orifice Diameter : 5/32" (4 mm) Seal/Diaphragm : NBR (Buna-N, Perbunan, and Nitrile rubber)
  • Current : 0.1 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel. Not Suitable for gasoline.
  • Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-180 °F (-10~80 °C).
  • Weight of solenoid valve : 14 oz Solenoid Valves are backed with our 1 Year Warranty


Product Description

Normally Open 1/4 Inch Valves; 220VAC 230VAC 240VAC Valves; ACECREW Valves; Valves for liquid, gas

NO 1/4 Inch 220VAC 230VAC 240VAC

Seal NBR (aka Buna-N, Perbunan, and nitrile rubber); Normally Open 1/4 Inch 220VAC 240VAC valves
Installation:

  • Clean pipe threads before installation.
  • Wrap the pipe threads with Teflon Tape.
  • Check and match the flow direction with the arrow on the bottom of the valve.
  • Coil terminals are not polarity sensitive.
  • NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.

AceCrew Normally Open Electric Solenoid Valve

1/4" AC 220V - 240V Normally Open

At AceCrew, we engineer products that meet industrial standards and are made with high-quality components. We can attest to this because we use all of the items we sell in our own manufactured products. We have over 40 years of experience in fluid control and are the OEM supplier to major first-tier valve brands.

  • Body Material : Forged high-quality solid brass
  • Operation Mode : N/O (normally open)
  • Pipe Size : 1/4" NPT female (18 TPI)
  • Voltage : AC 220V - 240V
  • Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Operating Temperature : 15-125 °F (-10~50 °C)
  • Media : Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)
Applications: Industrial grade highly reliable
Operation Type: 2-way 2-position direct acting
Operation Mode: Normally open (valve closes when coil is energized)
Flow Direction: Unidirectional (follow the arrow on valve body)
Flow Rate: Cv = 0.5
Current: 0.1 Amp
Coil: Copper wire in resin-molded casing
Seal: NBR (aka Buna-N, Perbunan, and nitrile rubber)
Insert: Stainless steel (plunger, spring, etc.)
Media Temperature: 15-180 °F (-10~80 °C)
Pipe Size: 1/4" NPT female (18 TPI)
Orifice Diameter: 5/32" (4 mm)
Weight: 14 oz
Mounting Thread (Base) : M4
Connectors : DIN

Internal Valve

Body Construction :

Forged high-quality solid brass. A corrosion-resistant, tough, and durable material which will last a long time.

Valve Seal

Plunger & Seal :

NBR (aka Buna-N, Perbunan, and nitrile rubber) a more durable seal with good abrasion and tear resistance. Plunger and springs crafted from stainless steel.

Plundger

Use:

General purpose use valve for water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)

Solid Brass Electric Valve 1/4 Inch; 145PSI Valves; Valve for gas liquid air; Normally Open 230VAC

Threads :

AceCrew follows National Standards for pipe thread in the U.S.A. We use NPT.


Lee
Reviewed in the United Kingdom on August 18, 2023
Bought some of these for work as an auto drain for compressors - worked great so bought some more for home.Only complaint is they use Evri for delivery - the worst delivery company in the world.