Your cart is empty.
Your cart is empty.Product Description
Martín lopez
Reviewed in the United States on February 11, 2025
Good
Tinkeringeek
Reviewed in the United States on January 5, 2025
The tool's fit, form, and function are reasonable but not well-finished. The upper and lower arms are not bent precisely at 90 degrees and, therefore, occasionally cause shifting of the face board. The spring-loaded mechanism relies on pressure retention, so it will not produce a secured clamp force to ensure that the face stays on the drawer during installation. Overall, the tool will do its job, but the user needs to make sure that the face doesn't shift from its intended location before securing it with screws. No manual is provided for the product.
Glenn
Reviewed in the United States on January 20, 2025
These clamps are assembled pretty well but I noticed the front and back jaws aren’t exactly at right angles. I was somewhat concerned if the clamps would work well or not because of that and I also noticed a little flexing on the jaws when in use. When I attached the clamps and made sure everything was aligned, I noticed that I could move the front panel with some effort. So, just to be safe, I aligned everything again and also attached a couple of wood clamps to ensure that there would be no movement. I then predrilled the holes for the screws and I was able to screw in the front panel to the drawer without any problems. I didn’t try these adjustable drawer clamps without the use of the 2 clamps I added so, it might just be the two drawer clamps is all you need. I only added the other clamps as a precaution.
STEVEN GRAVEL
Reviewed in the United States on January 2, 2025
This drawer front installation clamp set, featuring a pair of clamps, is an incredibly useful tool for hobbyist carpenters. It offers a precise and versatile solution for installing drawer front panels. Unlike traditional horizontal methods, these clamps provide superior adaptive alignment and accuracy, ensuring professional results with ease. The user-friendly design makes them an indispensable accessory for DIY enthusiasts, transforming challenging installations into quick and simple tasks.
Natasha Peterson
Reviewed in the United States on January 2, 2025
"This is a useful tool for those that like to build their own cabinets.Seems pretty durable. The bar is stainless steel, but the rest of it appears to be plated steel.The tool accommodates a total thickness (drawer front + false front) of 2 inches with a minimum thickness on the scale indicating 1.3 inches. I'm assuming this is really 1 1/4 inches so you can insert the tool and then squeeze the handle to cinch it up.The minimum spacing between drawer fronts would be just over 1/16 of an inch if you can fully close the drawer and allow the frame of the tool to set the spacing between drawers.To work properly the tool requires that the false front extend about 3/4 inch above the door frame. The tool also includes a second set of guides for false fronts to extend approximately 1 1/2 inches above the door frame.I tend to make utility cabinets and I have the false fronts extend a fraction of the above dimensions. This allows me to maximize the space of the drawers. This still allows some usage for the tool although I will not be able to close the drawers but can get approximately 5/8 of an inch away.If I knew this before, I probably would not have requested these, but this is not a fault of the tool. This is just something to be aware of depending on the types of cabinets that you build."
Nick Rammel
Reviewed in the United States on January 2, 2025
The adjustable grip mechanism on these clamps provides consistent, even pressure for precise drawer front alignment. While installing 12 cabinet fronts in my kitchen, the rubber-coated contact points protected my new drawer finishes from scratches. The clamps held everything securely, allowing me to work alone without awkward hand positioning. Their compact size made it easy to access tight spaces between cabinets. Throughout my kitchen renovation, these clamps ensured consistent spacing and professional results. For anyone working on drawer installation projects, these tools offer reliable performance.
Irene Cabrera
Reviewed in the United States on April 4, 2025
The media could not be loaded.
Katherine Herrera
Reviewed in the United States on April 10, 2025
It is very important to have tools at home that make it easier for you to assemble your furniture and this clamp can adapt to drawer thicknesses ranging from 0.827 in to 1.969 in, making it a versatile tool for various projects.I recommend it as it is very useful for the home.
Recommended Products