Your cart is empty.
Your cart is empty.Product Description
Product Description
Air Locker AP700 is a powerful tool designed to push out nails from a variety of soft and hard woods without affecting the quality. With a lightweight die cast Aluminum body.
AP700 isn't only highly durable but features an ergonomic rubberized grip so you can work for long hours without any fatigue.
The tool comes with a slim elongated nose that easily gets into cramped spaces while hardened hammer delivers a powerful blow to remove the nail. Now you can denail reclaimed wood like a pro. You'll need an air compressor for usage.
APPLICATIONS:
- Remove nails from floorboards, weatherboards, fiber sheets, skids, pallets, boards, barn lumber, sheathing and wooden decks.
- Works with different types of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, Osage orange, White Oak and Maple.
INCLUDES
- Punch Nailer / Nail Remover
- Operating Manual
- Packaged in cardboard box
Rubberized comfort grip for fatigueless use
Often you need to work long hours when you have large project. AP700 comes with a rubberized ergonomic grip that doesn’t only feel great in your hand but keeps you going preventing fatigue and soreness.
Denail boards/pallets without any damage
Why spend hours removing nails manually when you can denail wood in a matter of minutes? This amazing nail puncher brings you exceptional portability that you'll appreciate. Removes or sinks nails between 10-20 gauge sizes.
Lightweight durable die cast Aluminum body
Quiet and precise operation saves effort and time. The die cast aluminum body makes the device durable but the overall unit still weighs just under 2 lbs. and feels great in your hands. Ideal for recycling wood while maintaining its quality.
Push variety of nails out of hard woods
The nail puncher provides enough power to push nails out of thick pallets. You can also use AP700 to sink nails into a variety of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, White Oak and Maple.
Rubberized Ring Prevents Slidage
The nail puncher has a rubberized ring around the rear end of the unit to prevent sliding when you are not using it.
Directional Exhaust adds Convenience
The rear end also features a directional exhaust which you can rotate 360 degrees to direct exhaust away from your face or work area.
Tonya
Reviewed in the United States on March 9, 2024
I wanted to use the tool to shoot down nails into lumber. The tip is to small for the nail head.
David Adam
Reviewed in Canada on November 20, 2023
Works great for removing jagged clear nails from hardwood floor.
Scott S
Reviewed in the United States on September 3, 2022
Put a trash can on the other side because this thing will throw nails around your shop like a stray bullet. So much power and easy to use, well built.
JAMES
Reviewed in the United States on August 5, 2022
Works good. Punches most nails out. Small nails or brads sometimes bent. Gave 4 stars instead of 5 for that reason. Still worth the money.
mike dischler
Reviewed in the United States on June 16, 2022
No more wasted wood. This easily removes nails from pallet boards. You might have to pull a few nails out from the thicker boards, but they come out easily enough. I even use it on boards that had staples in it also. It didn't totally remove the 2 inch staples but made it easily removeable with a plier. I even use it on boards that had the former nails shaved off, I just put the tip next to the shave off end and then turned over to remove easily with a pry bar if needed. I WILL RECOMMEND that when removing the nails, do it over a 5 gallon bucket 2/3 full or something with at least 6-8 inches of water. I had some ricocheted at first when I was doing in over a deep garden box to catch the nails I was removing. The water will prevent this from happening. This product has some power to do the job.
michel lapointe
Reviewed in Canada on October 13, 2022
Vous n’avez aucune idée comment cette outil me sauve du temps dans la récupération de bois.N’hésitez pas a l’acheter
Joe
Reviewed in the United States on September 23, 2021
I originally purchased this tool primarily for nail removal (salvaging framing lumber from remodels, etc. and pallet break-down for other scrap wood projects), but as other reviews have noted, it's equally effective for setting and/ or driving nails. I have used this on plywood subfloors that were installed with framing nails in the 90's (after screwing into joists), as well as wood decks where some original nails needed resetting after reinforcement with deck screws. No complaints so far, powerful and effective- just don't forget your PPE!
Dave
Reviewed in the United States on March 26, 2021
Likes.. Lightweight, good balance, comes with replacement parts. In the time it would have taken me to hammer out the nails on one 2x4 with a hammer, the punch driver had punched out six. I had recovered a pile of wood that would have taken a day in about an hour and a half. It punched just about every sized nail I had to remove without issue. Small nails in plywood may actually punch all the way out so keep a magnet in a plastic bucket handy for clean up. Very nice tool and I'm really happy with the purchase.Dislikes.. None yet.DO wear safety glasses when using this product. It does generate sparks and small metal bits as a result of the punching action. I did find it to be very safe to use despite this.
Customer
Reviewed in the United States on February 27, 2021
Works great. Easy to use. Sturdy. Speedy. Able to remove bent-up nails that I could never accomplish without it. Oddly, I find it fun to use and it gives me a sense of accomplishment clearing up boards I would have given up on and just thrown away in the past.
R. Peebles
Reviewed in the United States on April 6, 2021
I have spent many many hours removing nails with a hammer, flat bar, and long crowbar and I wished I had this tool back then and saved all that time back!!! I came across this tool on a youtube video and took a chance and so glad I did. This is basically an air hammer and pushes the nail back out the hole.So how does this work? The tool has a shaft with a piston inside. So you place the nail tip into the shaft as far as it will go and press the button. The piston pushes the nail out of the board as far as it can. If the board is thinner than 1.5" it might FLY out of the board! It takes some practice so for smaller nails with thin boards just don't put the nail completely in the shaft. For big 16 nails in thick boards it pushes the nail out as far as it will go and you can pull it on the back side.This works with bent nails as well. Just use the shaft to straighten the nail to try to get line it up with the hole and let it fly!Wear safety glasses and use a bucket with some water or paper to help capture the nails when they fly out of the board!!! I had nails bouncing off the concrete floor and hitting my ceiling 14ft up! Be careful because this thing works very well.
Jay
Reviewed in Australia on April 6, 2021
Works well for taking large nails out of wooden planks, but dont try it for brad nails.I got a 16Ga bradnail stuck in it and had to disassemble the unit to fix it
K. Hartmann
Reviewed in Germany on June 4, 2019
Früher geliefert wie Angegeben.Schnelle Rückmeldung auf Problem bei der Lieferung.Funktioniert einwandfrei. Absolut empfehlenswert
Michael D Patterson
Reviewed in Canada on November 1, 2017
I ordered the air locker to remove nails from skids and staples from hardwood flooring. Saved me days in time removing and more time making. Great tool to have in your arsenal.
Recommended Products