Your cart is empty.
Your cart is empty.Product Description
Pool repair kit is mainly used for PVC, EVA, ABS, rubber and other materials self-adhesive, mutual adhesive. This vinyl patch kit for inflatables is very suitable for: PVC inflatable toys, air bed, sofa, inflatable boat, beach ball, yoga ball, swimming ring, PVC swimming pool, PVC waterproof clothing.
Looking for a reliable solution to repair your inflatables? Look no further than the Hannaera repair kit for air mattresses! This inflatable hot tub patch kit creates an ultra-strong bond between the repair patch and the damaged area, ensuring that your inflatables stay in top condition for longer.
Thanks to its slow-drying glue, this PVC repair kit is more flexible than ordinary glue. Our Hannaera inflatable mattress patch repair kit fully cures within 24 hours, providing an optimum bond strength and water resistance.
Pool liner repair kit is generally waterproof and will last a long time.
Inflatable mattress repair kit is transparent, so it's hard to see any signs of adhesion.
Vinyl pool repair kit within 24 hours completely dry, can reach a strong viscosity.
Clean the surface to be repaired and keep it dry.
Take a repair patch and cut it to the right size.
Apply an appropriate amount of glue evenly to the repair patch.
Stick to the area to be repaired, apply a heavy weight to it and wait for 24 hours.
AB
Reviewed in the United States on September 3, 2024
Nice to fix a hole in an air mattress or pool toy. Keep in your camping kit or house so you're not in a bind when you have guests come over.
KEVIN SUTHERLIN
Reviewed in the United States on September 16, 2024
I actually used this on my air mattress and it worked really well!
Curtis L R
Reviewed in the United States on July 7, 2024
Works as intended. There is plenty of glue to use on a variety of projects/needs. I recommend spreading a fairly thin but VERY even layer of glue (but not too think) using a small spatula or something flat. Then place the patch on it and use the spatula or squeegee to force any air bubbles out from the inside out. Don't press too hard or the glue will come out. Then place something flat and heavy on it and let it sit overnight and you'll have a really good patch that will stand up over time.
Hillary
Reviewed in the United States on July 7, 2024
The media could not be loaded.
Alex P.
Reviewed in the United States on July 28, 2024
This repair patch set has everything you need to repair all kinds of inflatable toys. I made sure to clean the area and didn't overly apply the adhesive. I've used this a few times to save pool floats and toys. The patches are sized well and can easily be trimmed. This set will last a long time.
Mike J.
Reviewed in the United States on June 23, 2024
I have never used a vinyl patch kit before so I have nothing to compare to. This kit comes with several larger patches and enough adhesive for probably about 1000 patches, no kidding, it's a LOT of adhesive. I needed to patch my son's inflatable dinosaur punching bag as it was leaking along one of the seams. The patch material is thin and flexible but thicker than what I am patching. As the instructions state, the patch may curl if too much adhesive is applied. I ran into this but it's an easy fix with a paper towel to flatten the patch back out and clean up any excessive adhesive. I couldn't figure out how much adhesive is too much since the adhesive starts flowing upon opening. The adhesive tube is VERY generous and given this, I recommend squeezing some out into the trash before first use or you'll be fighting the self dispensing nature of a full tube. Anyway, I trimmed a patch to the area needed, placed the patch over the leak, folded it in half, then applied adhesive to the punching bag and folded the half of the patch onto the adhesive, holding the now glued half in place with a paper towel while I did the other half. It comes with a rigid spreader that is really made for auto body work, not a soft vinyl patch. I tried using the spreader and that was a bad idea. Instead, I just used the paper towel to even out the adhesive (under the patch) and the patch. The instructions state to lay the patched area flat and put something heavy on top and wait 24 hours. So I placed a 5 pound dumbell on top of the patch. I tested it after about an hour and it appears to be fully bonded but I'm not in a rush. Since I've never used a vinyl patch before, I didn't know what to really expect, but I did think the patch would be cured quickly (less than an hour) and not require 24 hours. But I'll reinflate the punching bag after 24 hours to see how the patch holds since I'm in no rush and want to follow the instructions.
Mindy S.
Reviewed in the United States on June 17, 2024
Very happy with this patch kit. It works great and it does seal very well. I have an adjustable air mattress on my bed and our dog's toe nails had made a couple of holes in it. Patched it with this kit, allowed it to set overnight to dry out and get a good seal. Put on my bed again the next day and it was great. I like that the cap has a pin in it to keep the tube from sealing up as well. Comes with pre cut patches or patches that you can cut to size.
Keli C
Reviewed in the United States on May 25, 2024
Got this repair kit to fix a leak in an inflatable footrest. The material of the footrest is a bit like suede so tried fabric glue as well as self adhesive synthetic leather patches and neither worked even though the leak is just a pinprick size. But this glue and patch did and at least for now the leak seems to have been plugged. The repair kit comes with a tube of glue, 5 clear small round patches, and 5 clear larger rectangular patches which you can cut to size. The important thing is after you apply the glue and adhere the patch you have too keep the leak area pressed tightly for 24 hours. Since the leak I needed to fix was tiny and precision being necessary I used a clamp for pressure and it was effective.
Recommended Products
$8.95
$ 3 .99 $3.99