Your cart is empty.
Your cart is empty.Product Description
Alloy Front & Rear Axle
Larger load bearings used around the gear set to reduce flex and create a stronger drive-train
Aluminium Alloy( Housing ,Steering Rod)Steel internal gears and driveshaft, durable in use
High pinion gears for added ground clearance & better driveshaft angles
Layla
Reviewed in the United States on August 2, 2024
I do believe I have finally found a decent low end set of complete axles,that weren’t already missing something,something broke on them or breaking on first run,after installing them! I like having the multiple positions to mount the lower links and shocks, w/o purchasing any other parts. Just the overall build, the size of the pumpkins,compared with the big bulky others I’ve tried.Troy
Nick
Reviewed in Canada on May 3, 2024
Poor quality axles overall. Can’t mount a servo to the front axle because the centre links bind under the mounting plate (the notch in the “carbon fibre” plate isn’t cut deep enough)Broke the U-joint in a front cvd shaft and the other is starting to twist on the pin.The aluminum used in the housings is super soft too. I’ve never had an axle drag and get caught up so much before and I’ve bought some cheapos in the past.2 stars because at least it wasn’t the diff that went first 🤘
Aaronb
Reviewed in the United States on January 29, 2024
Bought these for my power wagon frame up build. I have run them for quite a while with no issues. Like all axles sold on Amazon all the allen screws should be removed and loctited. Also grease the gears. I paired them with a 2Low overdrives front trans and they work very well.
Rob
Reviewed in the United States on January 15, 2024
Seems to be holding up ok. As everyone else explains locktite every screw before installing. Gives a little more weight than stock haven't had any Major problems a couple screws came loose but after using blue locktite no problems yet but I have noticed that the inner axle has wear and I've only had them a short time.overall happy with them
Cole Glazner
Reviewed in the United States on June 24, 2023
I was looking for an axle that looked more scale and didn’t break the bank. This one fit the bill, however, it didn’t come with the screws for the upper link mount on both front and rear axle. Also, the screws on the front axle were all loose and consequently the axle tubes were loose. Little bit of loctite fixed that problem, but I was annoyed that it didn’t come with those two screws even though they’re clearly shown in the pictures in the listing. Feels like a solid axle though, gears spin nicely and quietly.
Tim
Reviewed in the United States on January 22, 2023
These axles are beautiful, however I've had problems out the box. First of all they were missing the bolts for the upper control arm links. No big deal I went to ace and found some that will get me going. I messaged the seller as well to ask about it and never heard back from them. I was happy enough the axles were mounted, looked good and added weight where I needed it. The first trip out my front axle started grinding and binding up. They worked fine until they had any resistance like being in a tough spot. After I got home and cleaned my truck I pulled the axle apart to find the ring gear was being chewed up because it wasn't meshed all the way with the pinion gear. Out of the box the front axles required shims but didn't have them. I was going to try my stock gears but those would also need a ton of shimming in the differential. I messaged the seller again, hopefully I hear from them soon. Ill update my review as need be. I want to love these axles but the issues are making it hard. So be careful with these because it seems to be the luck of the draw if you have issues with them.
Raymond B. Mcguire
Reviewed in the United States on September 13, 2022
Nice, strong axles!I have the original scx10 and it still had the original axles. After about 12 years of reliable use, the dogbones gave out and I couldn’t find any replacements and the replacements Suffered from extreme binding and understeer. I decided to try a new set of axles, but I couldn’t find any stock replacements. This one looked promising though. I’m glad I purchased it. My rc performs great again!The housing seems really sturdy and the gears seem strong too!In case you are planning on getting these for a gen1 scx10, you will need longer long suspension arms and a servo perch.
Sebastien
Reviewed in Canada on November 14, 2021
These axles are great even after few months of use. Just put some loctite on ALL screws and setscrew or they might fall during your first ride. Add a little bit of grease into the differential too and you'll have a pair of very reliable axles that look very good!
Bruce S
Reviewed in the United States on September 14, 2020
Bought these for my SCX10 ii Cherokee build. Fit great and look great! Stock Axial internals fit these axles if anything breaks. Good solid durable axle housings. Loctite all screws and grease the gears, this isn’t done from the factory.
Customer
Reviewed in the United States on May 4, 2020
It looks like made out billet so looks strong all bearings and gears look great with spiral gears and good pitch theres no binding and even has better turn radius then stock axles I love them and if anything breaks I'll just thro in parts out plastic axles all same specs I really just got them for the housings I'm in love will rewrite if housing snaps or anything crazy
Recommended Products