Your cart is empty.
Your cart is empty.Product Description
Your new desktop computer
The speed and performance of the new Raspberry Pi 4 is a step up from earlier models. For the first time, we've built a complete desktop experience. Whether you're editing documents, browsing the web with a bunch of tabs open, juggling spreadsheets or drafting a presentation, you'll find the experience smooth and very recognisable — but on a smaller, more energy-efficient and much more cost-effective machine.
Quad Core CPU
Energy-efficient Raspberry Pi runs silently and uses far less power than other computers.
Bluetooth 5.0
All New Bluetooth 5.0 Can Connect most of your Device.
Fast networking
Raspberry Pi 4 comes with Gigabit Ethernet, along with onboard wireless networking and Bluetooth.
Yamezbond
Reviewed in the United States on March 19, 2025
The media could not be loaded.
LJ
Reviewed in the United States on January 30, 2025
It did not fit. When I attempted to install the board, there appears to be either a warp in the aluminum or the precut holes for the power and sd card were off just enough to not fit properly. Not only did it not fit properly, but it placed too much stress on the sd card holder that it no longer reads the sd when inserted. Now I have to replace my entire raspberry pi unit for another $65. extremely disappointed. All I wanted was to find a better than option than the cana kit because of the fan noise. This was not it. Hoping for their sake it was just a one off and other people don't have this situation.
K. Vish
Reviewed in the United States on April 6, 2025
Nice and simplistic!Easy to assemble (despite one hole's thread being tight, but I managed) and keeps the temp on my Pi4 only ~5C higher (~40C) than my previous plastic case with individual heatsinks and a fan (~35C).But on the pro side: it's dead silent vs. the tiny-whiny and annoying little fan.
Shen Y.
Reviewed in the United States on July 24, 2024
I recently purchased the iUniker Aluminum Raspberry Pi 4 Case, and it has proven to be an excellent choice for keeping my Raspberry Pi 4 cool and protected.This case is crafted from aluminum, providing passive cooling through efficient heat dissipation. It's specifically designed for Raspberry Pi 4 Model B with compatibility across all RAM configurations (8GB/4GB/2GB).The sleek design not only enhances the aesthetic appeal but also ensures durability and protection for the Raspberry Pi board. The case includes integrated heatsinks that effectively manage temperature, allowing for optimal performance during extended use.Overall, the iUniker Aluminum Raspberry Pi 4 Case is a must-have for anyone looking to safeguard their Raspberry Pi 4 while maintaining optimal operating temperatures. It combines style with functionality, making it an ideal choice for enthusiasts and professionals alike. Highly recommended for its quality construction and cooling efficiency.
Robert A
Reviewed in the United States on December 15, 2024
I have a Raspberry Pi 4 with no hat so this case works. Pi 4's don't run very hot but this case is a great heat sink anyway.
Rock Dubois
Reviewed in the United States on April 12, 2024
I was concerned after reading a negative review that it doesn't fit. But when I looked more closely on his attached picture I realized that he did not remove the small heat sinks that were on the ICs.I can confirm that it fits, easy to assemble, clear instructions (large enough so you can read them) and is very well finished, comes with the heat transfer pads.
Richard E. Crawford
Reviewed in the United States on November 19, 2023
Finally, my raspberry pi has an adequate case!In the past, I have run it 'naked' with no case at all; I've also run it mounted to an acrylic board that was called a "case". I've run it with a cute little fan that crudely blew air on to the CPU (but not the RAM, USB controller, or power supply...), and finally, I've even run it with noisier fans that attach to the CPU with thermal paste and feature cool LEDs like the "big" computers do....But I wanted something more sleek and quiet to make a real workhorse out of, and this case delivers that!The entire case is metal, so it's a huge heat sink. It comes with thermal pads that attach the metal to the not just the CPU, but also to the USB controller, the RAM, and the power supply chip. This design is excellent, both functionally and aesthetically -- and a HUGE plus for me is that it's completely quiet since there are no moving parts like fans!I am loving this case and would never want anything other than this. In my application, I turned the raspberry pi into a Speedify box to bond internet connections together, and it's performing really well at that task in this new metal case.
Ralph
Reviewed in Germany on February 11, 2021
Skeptisch war ich schon, als ich mir dieses Gehäuse bestellte, denn es gab schon einige durchwachsene Kommentare, allerdings waren die neueren Bewertungen besser . Heute kam das Gehäuse an und ich war gespannt, was es mir bieten würde. Alle Teile waren sauber verpackt, Kleinteile in einem Tütchen innerhalb des Gehäuses, das wiederum in einer niedlichen Pappschachtel steckte. Eine bebilderte Bedienungsanleitung gab es auch dazu. Einzig die Aufklebe-Gummifüsschen lagen lose in der Pappschachtel und konnten leicht übersehen werden. In dem Tütchen wären sie besser aufgehoben gewesen. Der Zusammenbau war recht einfach, der Raspberry Pi 4 passte sich hervorragend in die untere Gehäusehäfte ein. Die Wärmepads waren beidseitig mit Klarsichtfolie bedeckt, die sich wirklich leicht abziehen liess und somit waren sie schnell aufgeklebt. Sogar Ersatzpads waren dabei und eine extra Schraube. Die Schrauben passten auch einwandfrei in die vorgesehenen Löcher und mit dem mitgelieferten Inbus-Schlüssel waren sie schnell montiert. Alles machte einen wertigen Eindruck. Jetzt kam der Praxistest und siehe da, die Wärmeanzeige des Pi kletterte auch unter starker Belastung selten über 60°. Die Oberfläche mit den Kühlrippen wurde natürlich entsprechend warm, aber nicht so sehr, dass man sich verbrannte. Man konnte locker die Hand darauf legen. Bluetooth, Wlan, alles klappt trotz des Metallgehäuses einwandfrei. Für meine Zwecke sind das hervorragende Werte und Eigenschaften und ich bin begeistert von dem Gehäuse. Von mir eine klare Kaufempfehlung für dieses sehr gute Gehäuse, das ohne nervenden Lüfter auskommt.
Ntunell
Reviewed in Italy on December 12, 2021
Dissipazione ottimale del calore. Diventa completamente caldo dissipando il calore della CPU. La qualità é veramente buona.
Parodius
Reviewed in France on January 22, 2021
Alors, boîtier parfaitement ajusté, finitions exemplaires. Ultra solide. Silence totale. Dissipation thermique excellente.Il est entièrement en metal/aluminium. 4 minis patins en gomme sont fournis pour qu'il soit stable une fois posé. Le wifi/Bluetooth n'est absolument pas affecté par la structure du boîtier (fonctionne très bien au quotidien sous Recalbox). Concernant la température, elle est équivalente à une solution avec ventilateur par exemple, sauf que la réparation de la chaleur est dissipée sur toute la surface du boîtier, ce qui évite les "points chauds" extrême. 2 petites Leds discrètes indiquent le fonctionnement du Pi 4b.Mon meilleur investissement Raspberry Pi. Oui un peut cher par rapport au autres boîtier, mais qualité incomparable ! Vous avez la sensation d'un objet bien fini une fois assemblé.
Cliente
Reviewed in Spain on September 19, 2020
Enfría pasivamente la Raspberry Pi.Pi-hole: 40°
AV Enthusiast
Reviewed in the United Kingdom on March 24, 2020
I was concerned when I read reviews of the Raspberry Pi 4B computer running hot however this iUniker aluminium case designed for the Pi 4B does work to limit the temperature. In light usage I have found the CPU is at 47°C.However the cooling effect is only possible if the case is assembled correctly. The instructions with the case are poor and from reading reviews by other Amazon purchasers of this item I think some have not appreciated the need to install the thermal pads correctly. The case is made with internal extrusions that match the 4 chips on the Pi 4B board that need to be cooled. When properly assembled the entire metal case becomes a heatsink to protect the Pi board from excessive temperatures.To do this the chips on the board and the extrusions on the cases must be in thermal contact. There are 8 pieces of thermal tape – 4 to be applied to the chips and 4 on the case. The difficult part is to prepare these pieces of tape which are in the form of a ‘sandwich’ with paper on one side and clear plastic on the other. It is essential both the paper and the clear film be removed to allow the thermal contact to be made. The clear plastic is easy to remove once you see it is there but the paper is difficult to separate from the thermal paste without damaging it. I used a sharp knife to carefully cut away the paper. When this is done and the case assembled the on-board chips and the case are then in contact.This is a well-made product only let down by poor instructions and difficult to use thermal tape.
A. Que
Reviewed in the United States on December 19, 2019
Great heat dissipation. I ran several stress tests using "stress" and "glxgears" on the system but never got the CPU much over 60°C. The Pi 4 has a hard throttle down point at 80°C but begins some throttling around 60°C. I use another all aluminum heatsink on my Pi 3, but that hits 75°C under heavy stress.The case looks really good. Tolerances are pretty tight--far better than any plastic case I've seen. On the case I received there is a bit a marring on the edges between the two halfs. The flat surfaces are mostly defect free and I only observed a couple of imperfections. All the marks took place prior to anodizing and are thus fairly hidden unless one looks closely. This Pi 4 will be part of a demo to a client and I feel the case is going to look good for this presentation.The rubber feet are a good touch to keep the device from sliding around. It would be nice if there were some kind of additional mounting option, like standoffs, that would allow the Pi to be mounted on something. However, the case is aluminum so drilling and tapping your own holes is an option and one I might pursue.My only complaint is that one of the screws was stripped out. My guess is an electric screw driver was used to put the screw in and stripped the aluminum threads on the case. The three remaining screws were fine however. The SD card also rather difficult to access. It inserts easily, but removing it can be more challenging.All said, I will likely be buying this case for future Pi projects.
Recommended Products