Your cart is empty.
Your cart is empty.Product Description
Sliding Door Stopper Fitment
- compatible with Mer-ce-des Sprinter
- compatible with F-ord Transit
- compatible with Ram ProMaster
Practical Application
Nancy
Reviewed in the United States on February 24, 2025
Just what we needed to be able to stop the door at half way. Easy to install. Works great. Would recommend.
JC
Reviewed in the United States on February 16, 2025
Make sure you sand contact surfaces with 120 sand paper
Rich
Reviewed in the United States on January 5, 2025
We used both of them, one to hold the door open half way and the other to keep it fully open. Epoxy worked just fine, no issues after a full season of having them installed.
ANNETTE
Reviewed in the United States on April 4, 2025
Return too tiny can make your own! Too expensive!
mike schiebert
Reviewed in the United States on April 11, 2025
Really poor epoxy adhesive. Failed in one week after allowing 72 hrs to cure.
Keith
Reviewed in the United States on August 3, 2024
This is my second one. The first one I tried used double sided sticky tape and worked well for about 6 months. Then summer and 100 plus degrees came and it peeled off. This one came with two part epoxy and everything needed to scrub, clean, and rough up the mounting location. I put it about midway through the door opening position and it works great and really makes the van more useful and creates more privacy while keeping great airflow.
Wieland Kaphingst
Reviewed in the United States on June 1, 2024
This is one of those super-simple inventions that works. The far back sliding door back roll in the mid-guidance bar has to climb over a little convex bump and then roll into a concave recess where it settles down. The door will not roll voluntarily back over the bump and out of the recess to lock unexpectedly - that is if it doesn't get a real purposeful push.The result is a door that stays open when opened and closes when pushed to be closed. No more surprise movements, no pinched fingers nor doggy tails!
Daniel
Reviewed in the United States on October 18, 2024
Simple installation, and hold the door quite well even on pretty severe slopes. If there is any drawback at all to its operation it does put a bump and hitch and the doors sliding operation.It comes supplied with enough glue to install 50 of them (less is more especially when it comes to epoxies or pretty much any kind of glue, and if you don't know already be darn sure that the surface is prepped and clean).And the price is right, more expensive does not mean a better product, it's a rather small piece of machine aluminum and this particular one is machine as well as as any out there.
Recommended Products
$47.55
$ 24 .99 $24.99
$73.95
$ 33 .99 $33.99