Your cart is empty.
Your cart is empty.American Defense MFG, LLC. was founded with an idea and hard work. The result was the patented QD Auto Lock System. The AD-T1-L mount is designed for the Aim point T-1/H-1 Micro and is the lowest mount we offer. This mount also fits the Vortex SPARC and Primary Arms Micro Dot. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems.
Denton Bryce
Reviewed in the United States on September 10, 2022
I put this on my LWRC M6 with a Vortex Spitfire. It fits well and holds zero but I’m not 100% sure it’s a real ADM product. It looks real, but it required a lot of adjustment and the metal used for the screw holding the QD lever was really soft and got scuffed up extremely easily. It’s also nearly impossible to use the lever without using something to pry it open. Maybe I have it too tight, but it’s about as loose as I could make it and still feel confident it would hold zero
Richard H.
Reviewed in the United States on February 14, 2022
Very happy with this item. I wish Amazon didn't ship it in a bag though. The first bag I received was empty with no item in it. Fortunately, Amazon support shipped a replacement at no cost. It did arrive again in a bag, not a box, but at least the item was actually in the bag.This base works perfectly with my Beretta CX4 and Sig Sauer Romeo 5. I was hoping it would co-witness lower 1/3rd and it does perfectly. The quick release is a very solid and I'm very pleased. I wouldn't hesitate to buy additional bases or items from American Defense Manufacturing!
Russian Bot #12
Reviewed in the United States on October 16, 2022
I’ve bought ADM mounts for ACOG and Red Dots and they have all been great mounts. So far I’ve bought 3 of these to mount HS403R sights on MP5 and MP5k rifles. These low mounts wouldn’t work on an AR15, but would be fine on anything that have sights mounted right to the top of the receiver like MP5, Scorpion, Beretta 1301, Benelli M4 , etc.
Meredith Dumais
Reviewed in the United States on July 5, 2021
This mount works exactly as it should. I am using for my m1a scout on the factory rail, with a Romeo 5 red dot. I wanted a qd mount so I could easily switch to iron sights. I also wanted to keep the weight down. This setup meets both of those criteria well.The mount is also much more solid than the stock mount for the romeo sight. The cross bolt fits the picatinny slot with very little play. And it locks down nice and solid. I have detached it 4 times already and If the poi did not shift at all. (I confirmed by shooting paper at 200yds) It also did not shift after I accidentally knocked the rifle over face down on a hard floor 2 times.It does sit higher than the sig mount but only by 1/32”. At first I didn’t like that at first but I easily got used to it, as it’s still not much higher than the iron sights anyways.This is a somewhat expensive mount but it’s well worth it if you want qd abilities and/or a more sturdy mount for your red dot. It is very well built and functional. It also includes 3 sets of screws of different lengths.
Stephen
Reviewed in the United States on November 13, 2018
I put this on my AK with a holosun 503GU and it has worked flawlessly! Not much to it, just mount the sight to it, tighten the set screw and throw that qd latch over. The button had me in question at first, whether it would hold or not but it works like a charm. Flips on and off when you want to run iron sights but holds right when it should!
ForkedDeer
Reviewed in the United States on July 2, 2016
Mine went on a T1 that was mounted to an ultimak on an M92 SBR. This mount was exactly what I needed, and provided a rock solid mount that holds zero when removed and reinstalled. It is made of quality materials and the locking mechanism is solid. I would buy it again. I should note that it does not allow co-witness in my particular setup, but with the ability to remove the optic quickly, I'm not concerned.
Chessie Trotline
Reviewed in the United States on February 3, 2016
The product is very good manufacturing quality. Clever release handle, it is innovative and uses a ball-bearing and a very small compression release to unlock. This makes the optic much easier to remove than the stock T-1 mounting base. I had to replace stock because (my error) I over tightened the stock mount and cracked a part of the stock mount. The way this is engineered, it is (nearly) impossible to overtighten this by design. The only color choice is gray (and I wanted black). The AD kit comes with several screws, wrench, liquid threadlock (blue version). You must reuse the stock T-1 screws with this mount because the ones that come with the kit are about 3/8 inch long and the stock screws are about 1 inch long (approximation). The item was well packed by Amazon. The AD box was tape-sealed to show no tamper--but a plain white box with a logo. This part also costs less than the stock replacement (approx. 20% less).
Eric aka SouthernSorrow
Reviewed in the United States on December 7, 2016
Rock Solid! Has a very wide pad/shoe to it so it's clamping on to a lot of rail-estate so there's no doubt it'll hold it's zero. They give you " 3 " 4pc sets of screws in Short, Medium and Long lengths for whatever you may need.The only 1/2 star I'd take off "if I could" is that the lever/paddle is a little wide and it sits against the rails and receiver making it hard to get your finger under it to pry the lever open. That reason is probably why they also make versions of their various mounts with what they call the "Tactical Lever" that extends downward.
Recommended Products
