Your cart is empty.
Your cart is empty.Product Description
Looking for a sub box for your hatchback or coupe? Our hatch enclosures are ideal since they direct the bass waves at an angle towards the rear of the vehicle to produce maximum performance from your subwoofer(s). This model enclosure is ideal for entry and midlevel subwoofers since mounting depth can be a problem on large magnet subwoofers. This is a single 10" sealed enclosure which means it's designed to deliver tight accurate sound quality. Just be sure to check the air space recommendation for the subwoofer(s) you plan to use.
You will not only see a difference in the quality of the boxes we build, but you will hear the difference and that is what is it is truly all about.
Our boxes are made from precision cuts of MDF. They are then liquid nailed, nailed and completely sealed. We then wrap them with high quality carpet that matches most vehicle interiors. All Boxes feature high grade spring loaded terminal cup(s) for the absolute best connection possible. All the custom series enclosures are made to fit precisely into your vehicle to the get the max performance from every extra inch of wasted space.
Specifications:
- Single 10" Sealed Hatchback Sub Box
- Mounting Depth: 11"
- Air Space: 1.50 Cubic Feet
- Sealed Enclosure
- Dimensions: Width 22" x Height 12-1/4" x Depth One 10-1/2" x Depth Two 15"
- High Quality Binding Terminal Cup (Accepts Banana Terminal Plugs OR Bare Wire 'up to 10GA')
- Sealed Design Produces Tight Sound Quality Bass
- High Quality Gray Carpet
Evan J.
Reviewed in the United States on February 8, 2025
The box is good enough for the cost, but the connectors are worthless. The connector prongs are flimsy and bent immediately with the slightest pressure to put connectors on. I wound up just having to solder wiring to it. The wire clamp is a screw down format, but they spin some. I made it work, but I would not purchase it twice. I doubt the extra few dollars for a better quality connector would've hurt profits much, but a poor product reputation will.
Mike Mccarty
Reviewed in the United States on January 18, 2025
I have a 10" punisher and i had to mount it inverted because the magnet is to big to go in at and angle. Not in issue for me but it does make the space it takes up conciderably bigger.
Nevada
Reviewed in the United States on May 4, 2024
Haven't hooked it up yet. Ended up using plastic hollow wall anchors to hold the screws in the MDF, nice and tight.
Jacob
Reviewed in the United States on January 29, 2024
Not gonna hold a heavy sub well but it’s not designed for that. Cheap box for any budget build looked great.
Chantelle Hinojosa
Reviewed in the United States on November 29, 2023
The only issue I had was the box had a horrible smell for unknown reasons maybe the glue used and smells really bad but if you can deal with that than no problem 😉
Steven Dennis
Reviewed in the United States on April 16, 2023
The box was made very well. I double checked thickness with digital caliper thickness is true. My 2ohm DVC 10in Tropo sounds amazing. Currently have a CT1000.1D powering the 10 wired inside to 1ohm. Surprisingly the box does extremely well even with the wide open hatchback Trunk area of my wagon. When I ran two 12in HCCA 12s in the back of my 92' Honda hatchback in early 2000's I used this same shape box. Does NOT dissapoint! I do wish they had pre-sunk threaded inserts but I now have the tools and accessories to do that next when I get a couple of 12s for Competitions. Very satisfied. The carpet is properly where it should be. No weak areas I see that could result in issues down the road. Great box! Get it Bumpin Yall!!!
smolbirb
Reviewed in the United States on June 16, 2020
Great cheap box for home and car applications.Currently running an old (early-mod 2000s?) cadence 2ohm 10" and a hifonics 1200 monoblock.The dust cap straight blew off the speaker, so I glued it on, and off it went again, so I've determined that porting is necessary. There's just no way around it. Otherwise any high powered 10 that's pulling a heavy load will beat this box to bits. It sounds great ay lower volume but it's clear that it's just too small the power I'm pushing without a port to let it out.Either way, pretty solid box and a good cheap deal.It's mdf of course, meaning you've gotta use threaded inserts.Not bad.
James Currier
Reviewed in the United States on February 23, 2019
This box is approximately 1.5 cubic feet sealed. While not heavy duty, it works very well for lower powered subwoofers. I am using it with a Cadence CM10D2 which handles 250 watts rms. I am going to purchase a second box and use a 3 inch flared port, that will tune the box to about 33/34 hertz. This will really bring out a lot more low end output. The nice thing is, the enclosure is large enough to make it ported for some 10 inch subwoofers.Update: I added the port (using a router and jasper circle cutting jig) and it brought out a really nice low end that wasn’t nearly as present before, and it didn’t take away to much punch. Very Nice!
Recommended Products
$70.48
$ 34 .99 $34.99
$39.95
$ 18 .99 $18.99