Your cart is empty.
Your cart is empty.The andis ultraedge 3/4ht blade is chrome plated, carbon-edged blade and made for andis detachable blade clippers. it can also be used with other brands of detachable type clippers.
Ryan
Reviewed in the United States on February 23, 2025
Long lasting. Close cut. Gets through mats well.
MichaelTerence S
Reviewed in the United States on February 10, 2025
Clean cutting and a great length for winter. I usually use a 1/2" blade but for February, a little more length is nice for these active dogs.
Joanna Foltz
Reviewed in the United States on January 28, 2025
We wanted to leave our dog longer for winter and this blade worked well.
FRECKLEFRACK
Reviewed in the United States on December 21, 2024
My dog is an AKC Registered GrizzleMutt. His outer coat is silky and long cocker spaniel, while his undercoat is a mix of sheepdog, rottweiler, catahoula, cane corso, and probably sheep and grizzly bear. Since moving to a colder climate (AK), he has pushed his fur growing abilities to a new level and now requires shearing at least every 3 months. His fur never stops, it grows to the floor. If he could donate his fur to a good cause (toupees?) he would. The downside of his gift is that even in the middle of an Arctic winter he is a sweaty, matted mess if I don't shear him regularly. And before anyone fur-shames him, he LOVES to be sheared and LOATHES being brushed. When his coat is even halfway grown out, he is a grouchy ball of matted sheep/grizzly fur who spends all day seeking out the coldest spot in the house. The second he is sheared, he becomes a young punk again, darting around like he's a spry 10 year old. I swear by Andis blades, and the 3/4" cut length is pure heaven. No guard needed, just be aware that the tips of the longest blade are a little sharp. So be sure they don't point directly into the skin as you shear; they should always be pointed at a slight angle. This new blade cut shearing time from 3 hours down to 1.5, which my back is grateful for. I wish I'd bought this blade 10 years ago, I'd have about a year of my life back. And the blade cuts like butter, smoothly and evenly. They never once got too hot. Other Andis blades with guards usually leave funny track marks in his fur, like vacuumed carpet. This new blade did not leave permanent "tracks," instead preserving his dignity so he can continue to awkwardly hit on the single ladies. My dog practically groaned in ecstasy as I shared the masses of yeti fur from his hindquarters. It got a little weird, not gonna lie.Recommend this for any dog with an equally thick undercoat. I use the Finish Cut blade for his paws and to tidy up around his ears. Before pic: about 3 months in to a grow-out. Pouting in a corner. After: proud of his furbabies! Yielded a bumper crop of 2 bags full of the Easiest Pet Ever (keep away from draft and flame).
JK
Reviewed in Canada on November 3, 2024
This blade is good for a longer length that the four chop blade for finish work
Scott B.
Reviewed in the United States on November 18, 2024
I’ve always had great luck with the quality of Andis products. I prefer them to other brands. Worth the extra cost.
Ivan
Reviewed in Italy on November 14, 2024
Taglia perfettamente sia pelo sporco che pulito. Il rapporto qualità prezzo è imbattibile. Consigliata!!
Sandra P.
Reviewed in the United States on November 1, 2024
Finally my Doodle can have a cut and still retain some length! Works like a dream.
Diana
Reviewed in Germany on October 3, 2024
Passen
MB
Reviewed in the United States on January 11, 2024
Great blade. For those of you who may have a problem attaching this blade to your AGC2 here is how to put the blade on.1. Seat the blade peg into the blade attachment slot.2. Press the blade release button at the back. Hint: keep the button pressed in the whole time.3. Press the blade down - the whole time you are holding the button in, and the blade will seat itself.4. Now stop pressing the button.5. Double check that the blade is seated perfectly. If it is you are ready to start grooming your pet.6. When ready to change out the blade - just press the blade release button again.I have to do the above steps for the following blades: 3 3/4 FC, 3/4 HT, 7FC, 7 FT, 8 1/2, 4 FCHopes this helps anyone who is having difficulty attaching your blades.
Magali Palacios
Reviewed in Mexico on September 14, 2021
Es lo que esperaba
Shammie
Reviewed in the United Kingdom on May 11, 2014
i have a lhasa x jack russell and she has the weird coat where i mixed with double and wire together and i luv this blade as i used this for her when she comes to college with me and now i go my clipper and i can start doing her at home and it leaves a nice length on her coat and just right for her to have her shirt on
J. Alvarado
Reviewed in the United States on January 23, 2013
I bought this blade because my hair is so unmanageable that about the only length that works for my hair is 3/4 of an inch all around. I had been using Wahl clippers with the No 6. plastic guard. However, I had found that the spacing of the teeth and the flimsiness of the plastic guard was allowing some scalp to pull up and it was giving me an uneven haircut. After doing much research and reading all the online reviews, I decided to splurge some money on an Andis clipper and on this particular guard.No complaints as far as the clippers and the quality of the guard are concerned. I am able to give myself a much more even hairdo AND in about half the time. The only reason I rate this 4 out of 5 stars is BECAUSE this Blade doesn't quite cut 3/4 of an inch. In Numbers speak, this blade would actually cut about a 5 1/2 (or about 17.5 mm short). TRUST me I'm very particular about my hair and hair length and I measured in different spots. But I think this only applies to a handful of us here on the face of the planet. For most of you, the blade should do a fine job on your K-9 i'm sure. AND for most of you that will use the clipper for human hair, a difference of a couple of MM should NOT really make a difference ;)
Recommended Products
