Shopping Cart

Your cart is empty.

Your cart is empty.

Araca PK-L2312U /PK-L2312UG Projector Lamp with Housing for DLA-X35 DLA-RS66 DLA-X700R DLA-X500R DLA-RS46 DLA-X95R Replacement Projector Lamp

Free shipping on orders over $29.99

$78.18

$ 34 .99 $34.99

In Stock

1.Style:Pk-l2210u


About this item

  • Compatible Models: PK-L2312U /PK-L2312UP /PK-L2312UG with housing, fully tested before leaving the factory.
  • The new electrode can prevent the projector from overheating or abnormal temperature.
  • 3000 hours life, 4000 hours in ECO mode, 1800 lumens brightness.
  • Araca offers a 200-day warranty and if the bulb fails, we will immediately replace it for free or give you a refund.
  • Projector Model: fit for JVC DLA-X35 RS66 X700R X500R RS46 X95R RS48 RS4810 RS49 RS4910 RS56 RS57 RS67 RS6710 X55R X75 X900R X900RBE X95 X950R Projector Lamp.



Product Description

Our attitude towards products and after-sales

  • In addition to focusing on improving product quality, we will always put customers first.
  • We will quickly respond to customer problems within 12 hours, and effectively solve the problem.
  • We will meet customer requirements and suggestions and provide customers with more support.
3

Araca Optical System & HD World

  • Araca is an electronic component R&D manufacturer and lighting system R&D manufacturer, we apply advanced optical technology to the projector light source.
  • We are eager to take you into a high-definition bright, and dynamic world.
  • We provide a 200-day return and exchange service, if the product fails in 200 days, we can replace it for you for free or return the full amount of the order to you.
4

Bulb model: PK-L2312U /PK-L2312UP PK-L2312UG

Ctrl+F to find your model

JVC X35 RS66 X700R X500R RS46 X95R RS48 RS4810 RS49 RS4910 RS56 RS57 RS67 RS6710 X55R X75 X900R X900RBE X95 X950R

The main parameters

  • Power: 230W
  • Output: 1800 lumens
  • Working hours: 3000-4000 hours
  • Period: 200 days
5

Innovative technology application

Araca creates high-end optical lighting technology, we focus on projector light source, stage lighting, 3D holographic architectural projection and many other fields.

6

Raise quality standards

  • Improve product quality on the basis of improving raw material testing standards.
  • The quality inspection team controls the quality of all processes for us.

How to extend the life of the projector bulb

1. After the shutdown, only wait for the fan to stop before disconnecting the power.

2. After turning off the projector, wait at least 60 minutes to reboot.

3. Do not disconnect the power directly during use.

4. No more than 4 hours each use time.

5. Make sure there are no obstacles around the projector to allow the projector to dissipating heat normally.

6. Regularly clean the dust inside the projector and the bulb, otherwise the elevated temperature will cause the projector shut down automatically to protect it.


William Shillinglaw
Reviewed in the United States on September 22, 2024
Works well. Initially thought, perhaps it was not going to work, but then realized that the access door must be in place for the light to operate. Working well so a good value
Carrie McGilliard
Reviewed in the United States on July 29, 2024
Lamp came quickly and was a breeze to install. Picture looked fine, but the lamp failed at 4 months
Baba Tc
Reviewed in the United States on February 5, 2024
Easy replacement, worked as expected. def not as high quality as the original one.
Mr Z
Reviewed in Canada on April 29, 2024
Replaced an aging lamp and this was a clear improvement on brightness, color quality and apparently in hours of life. Plus the warranty on the product is solid. Very happy with the acquisition.
Keith A.
Reviewed in the United States on November 7, 2023
Used to replace a cheaper bulb that began to dim quickly (100 hours) after purchase. I am hoping that this bulb will out perform the other.
Customer
Reviewed in the United States on November 26, 2023
Exactly what we needed. Works perfectly
Customer
Reviewed in the United States on June 13, 2022
After two years, I had to replace the original Epson bulb. The Araca is now 6 months old. It started out ok, except for the noxious burning plastic smell, but got more and more dim, picture washed out and the colors are not vibrant. Had to turn up the brightness and contrast 50 to 100%. Also, the fan gets noticeably louder. I never remembered that before the Araca bulb.We were thinking about replacing our 3200 lumen Epson HD projector with an 85” TV, but I decided to get an original Epson bulb first before giving up on my $1000 projector.The Epson bulb reminded me why I got this projector in the first place. With the settings now back at factory, the image is awesome - bright, vibrant, clear.I won’t spend my money on a cheap replacement bulb again, because the original lasted 2 years and the replacement had degraded in about 3 months. The cheap one is actually much more expensive and disappointing.
CH
Reviewed in the United States on March 14, 2021
I was afraid to put the lamp in so i tried taking the projector to a few places without any success. I finally decided to do it myself and it was so easy. The lamp came on time and was easy to install. The lamp came out with little pressure and went in with a small push of the finger.
Customer
Reviewed in the United States on January 29, 2021
Wires coming from bulb needed to be screwed in. It was a simple task. Appears to be working well.
Recommended Products

$312.48

$ 99 .00 $99.00

4.5
Select Option