Your cart is empty.
Your cart is empty.keisha Farley
Reviewed in the United States on May 17, 2025
⭐️⭐️⭐️⭐️⭐️ Beautiful, Modern Look with Easy Installation — Transformed My Space!I purchased the Art3d PVC Wave Board 3D Wall Panels to create an accent wall in my living room, and I’m truly impressed with how they turned out. The wave texture adds a clean, modern touch that instantly elevated the entire room’s look. The white finish is bright and paintable, though I chose to keep it white for a minimalist aesthetic.Each panel is lightweight yet sturdy, and the PVC material makes them easy to clean and perfect for indoor use. I was pleasantly surprised at how easy the installation was — I used adhesive and a bit of patience to get the alignment right. The panels cut cleanly with a utility knife or fine-tooth saw, which was helpful for fitting around outlets and corners.One box (12 panels) covered about 32 square feet, just as described, and the results look high-end without the high cost. The final effect is seamless and really eye-catching — I’ve already gotten compliments from guests!If you're looking for an affordable way to add texture and dimension to a wall, I highly recommend these panels. Just take your time during installation for the best results. Great value and a big visual impact!
Sharmeen
Reviewed in the United States on May 14, 2025
These panels are awesome.. I used them to cover my shower walls and they look gorgeous.. I did paint them a glossy white..
Cinzia
Reviewed in Italy on March 8, 2025
Ottimo prodotto consiglio rinnova pareti
Customer
Reviewed in the United Kingdom on April 16, 2025
Spot on . Done the job
alexia
Reviewed in France on August 3, 2024
Livraison très rapide en 3j ! Je suis trop contente du rendu parfait pour installer mon futur pc🫶🏻
Promise Nformi.
Reviewed in Spain on June 25, 2024
Just what I was looking for. Excelente
Doris J Harris
Reviewed in the United States on October 3, 2024
Quality, Texture, It’s a beautiful design!
Elvee
Reviewed in the United States on November 11, 2023
These were perfect and easier to cut than thick PVC. This was inexpensive and just what I needed for my bar area. Take your time. Map out the space with a mock look. I used painters tape. Please please dont play yourself and try to use BS adhesive. Liquid Nails or Gorrila Glue will do the job. Overall I’m pleased with the outcome.
Joyce
Reviewed in the United States on January 18, 2023
I bought this tile after watching several youtube videos on installing them. First, whoever these people are they are professionals. I have a moderate "knockdown texture on my walls as most homes are. No matter what glue I used, no matter how long I waited to put them on the wall the sides of these panels are so narrow that sticking on the wall is almost impossible. I am on my third day and have only managed to get up 15 tiles. This is not a reflection on the company thi is the product. IT SUX. I havent talked about cutting them.. GOOD LUCK. No matter what you use you will not get a clean cut. And power saws will chew them up like paper!!!!!!!
Biljana Packovski
Reviewed in Australia on December 13, 2022
Beautiful
Elena Soria
Reviewed in the United States on July 13, 2019
I'm a lady, wanna be handy woman, impatient but decided to try myself first and in case I get frustrated I would hire someone. I have never used gorilla glue cartridges or a gun for it. When bought the glue gun the guy in the store didn't explain correctly, but I saw a video on how to use it and it was fine.The panels are light, easy to apply the glue on, easy to clean when a little mess happened, easy to cut, I didn't use the tile blade because I was nervous I would cut myself, so I tried with a regular cheap scissors and I cut the panels without problems. No much pressure is needed to hold the panels once glued and joined a few seconds. My wall and the top were uneven, and this caused the panels not to be perfectly together at some corners, but it's almost unnoticeable. I'm very pleased with my purchase and recommend the product. It adds up a great value to any room .
Cool Diva Mom of 4
Reviewed in the United States on January 31, 2019
I'll start off with saying that I don't believe as some other reviewers stated that these need to be professionally installed; these are really nice and are much cheaper than tile backsplash! A little tough to work with, but they are not fragile. We did these as a vertical backsplash in our kitchen on one entire wall between the upper and lower cabinets and above the upper cabinets to the ceiling and above the sink between the sink and the window (see pics) It turned out great, but took along time to cut around the outlets. We used a dremel and light sandpaper on the cut edges. It took my husband and I about 15 hours to do portions of a 15 foot long wall from start to finish, but I'm super picky. We used white silicone adhesive and put it on close to the edges then wiped away the excess. I also recommend cutting along the wavy edges with a pair of utility scissors instead of leaving a straight cut or an open/exposed edge. We chose not to paint them as they were going in a kitchen area and would be wiped down frequently, but if you choose to paint them, I recommend using a paint sprayer for even coverage. I would buy these again. We paid seventy five dollars per box in August of 2018, and that was a good deal in my opinion. Also, this is my second review as the first review was done on the same product but a similar style/model number of one an Amazon customer had a question on, so I thought I would review here on the ones I purchased.
VRup
Reviewed in the United States on December 29, 2017
I needed something for my basement brewery and didn’t want to do the typical tile or stained wood look so I of course I check amazon and found these.So I was skeptical based off PVC walls from China but bit the bullet based on reviews. They arrived in one week via FedEx international (prime wasn’t offered). The item was packed well. But once I opened the panels I was even more skeptical of the quality. They are thin sheets of plastic PVC which were hollow on the back on the raised portions. I tried three types of glue - tile adhesive, tile bond, and then 3M spray adhesive but I couldn’t get these to stick. After 30 mins the Edges would peel off. So then I actually read what other people used and used Gorilla glue construction adhesive with my caulk gun. (Be sure to put adhesive everywhere the back touches the wall.) Wow! I let it sit for a day then painted with SW super satin paint. Once it cures to the drywall they are solid and definitely the opposite of flimsy. What an impact! I get very positive reviews from everyone that visits my home brewery.I also used a dremel to cut around the outlets and speckling to fill in the gaps. Then sanded it down.It took some work but well worth it!
Recommended Products