Your cart is empty.
Your cart is empty.PLEASE MESSAGE YOUR PHONE NUMBER AFTER YOU PAID. we need write it on the tracking sheet Arvorin rod is a super good ivory substitute material for pool cue, bagpipes, pen, knife handle, shaving brush holder. Good performance under cutting, drilling, tapping, sanding & good performance on epoxy to wood. Arvorin has beautiful grain within - the grain is not symmetric and not consistent, one side is coarse grain, another side is fine/none grain. EACH ROD IS UNIQUE GRAIN. 6 Sizes are available below, choose for your different application. 1. Ferrule Size Rod: Φ15mm x 300mm (Φ0.590" x 12") 72gram 2. Joint Size Rod: Φ25mm x 300mm (Φ0.984" x 12") 190gram 3. Butt Size Rod: Φ38mm x 300mm (Φ1.495" x 12") 410gram 4. Inlay Slab: 46mm x 46mm x 290mm (1.81" x 1.81" x 11.5") 800gram 5. Inlay Slab: 52mm x 52mm x 285mm (2.047" x 2.047" x 11.2") 1020gram. 6. Bagpipe size: Φ54.5mm x 300mm (Φ2.15" x 12") 900gram. things to know before purchasing... 1. Arvorin have 0.02"-0.05" thickness wrapped slurry outside, after cut off the skin of the material & polish, you will just find the beautiful looking as same as the photo on listing. 2. make sure you have a sharp tool/cutter when you work on Arvorin. 3. do not be too aggressive & do not cut too much by one time, control the machining speed of your router/cutter in medium speed or under medium. PLEASE MESSAGE YOUR PHONE NUMBER AFTER YOU PAID. we need write it on the tracking sheet.