Your cart is empty.
Your cart is empty.ASTEUROHV103 Features: -Durable and lightweight. -High efficiency. -Quick thread technology. -Smooth operation. Dimensions: Overall Height - Top to Bottom: -5 Inches. Overall Width - Side to Side: -6.5 Inches. Overall Depth - Front to Back: -9 Inches. Overall Product Weight: -1.9 Pounds.
Customer
Reviewed in Canada on July 15, 2024
Lays down base n clear no problem, it is better than the flg guns I have…Nice and light. My nozzle won’t remove , not sure if this gun designed this way? Awesome gun so far👍
Rick Anderson
Reviewed in the United States on June 7, 2024
I think the gun is more for spot repair very small pattern, but as a nice even pattern!!
Customer
Reviewed in Canada on June 5, 2024
This spray gun did a fabulous job, very impressed. Very easy to clean, a pleasant surprise.
Francisco Daniel Garcia Cardenas
Reviewed in Mexico on August 2, 2023
Muy buena calidad de los componentes una gran diferencia de la pistola de retoque boquilla 1.0 de Truper que tengo
Customer
Reviewed in the United States on September 5, 2022
At first I had my doubts, bc I was using the cheapest clearcoat I could find with my 30 yr old hvlp devilbiss flg gun. It would not lay down smooth even with a 1.4 tip and thinned 20%. So then I got this, and used the same paint with slow reducer and slow activator. This thing lays out clearcoat like glass! I think bc it's high efficiency is why I can spray as low as 15psi...that's not a typo, 15 psi and it atomizes as good as it does at 27psi. It even atomizes ok as low as 10psi! The only difference is way less overspray at the lower pressures. The spray pattern is super wide as well. (with higher pressure). The atomization of this gun is simply incredible! And it is so easy to clean. What I do is disconnect the air then open up the trigger and spray some carb cleaner through the gun until it begins running out clear. then I take it apart and do the final cleaning. I also have diaphragm type regulator, the cheapies don't cut it for me. I used to hate painting, now I love it! :-)
L. Dingfelder
Reviewed in the United States on September 30, 2022
Great atomization, works extremely well. I'm an amateur, and used this gun for epoxy primer, urethane color coat including microflake (.004"), and urethane clear coat. Excellent results with all. The only defects in the job were due to my own learning curve.
Customer
Reviewed in Canada on July 18, 2020
I have been painting a lot of bumper covers and fenders. Didn’t like my cheap princess auto guns. This gun sprayed awesome. Gave a really nice finish. I was spraying Sherwin Williams and Nason single stage paints. Works great and highly recommend it. I get a really smoth glass finish.
denis220
Reviewed in Canada on June 11, 2020
I was repainting my car for the first time, and honestly I was not going to spend $1000 on a gun for one job. After reading many many many reviews online I settled on this one. And I didn't go wrong. 1.3 tip is amazing for epoxy primer, and base. It sprays metallic really well! Clear coat was difficult though. I wish I had more time to mess around with it. 1.3 will give you orange peel, you will have to wetsand it, but it is the way. There is a reason why professionals have multiple guns for different stages.Overall: 1.3 is really good base gun. Maybe for my next project I will buy 1.5 to try for clear.
Chaychaychay
Reviewed in the United States on March 28, 2020
Months later still impressed basecoat Pearl's are perfect metallics are perfect clear is like glass I'm very picky and this gun I have ZERO complaints even the overspray is not bad compared to others I've tried and own between SATA iwata etc this gun holds it's own actually it's better then most major brands.. balanced light weight.. just PERFECT
SEG
Reviewed in the United States on February 19, 2017
I am not a professional but I don't need to be one to know this is a quality spray gun. For the occasional painter like me this gun does exactly what I needed it to do. For epoxy primers and polyester finish coats, the 1.5mm tip is just right. Maybe the 1.7 would have been faster but this gun lays down the product very smooth. I installed a new main air line oil water separator and I put a mini separator at the gun along with a regulator. Line pressure is set at 90 psi and the gun pressure is set at 30 psi. This gives me a 6-7 pound pressure drop and delivers paint at 23 psi. Perfect. Very little overspray. With a fan blowing in my shop, I am not so sure I need a cartridge mask but I always wear one and you should to. I only mentioned that to emphasize how little over spray there is. Great product at a very reasonable price. Wish I had a second one with a 2.1mm tip for lacquer primer.
RT
Reviewed in the United States on October 25, 2016
I bought this to replace my eastwood low-cfm usage spray gun, figuring it was a middle ground between the HF guns and the big money ones. My main concern with the EW gun was the sub-par fan height. This one puts out a nice full 8-10" tall fan when 8" away from the piece (compared to the eastwood that is more like a 5" fan) and you dont need to move at a crawling pace to get the material down. I use this with a 60 gallon compressor, with a regulator on the output set to 80psi, and I have the small 3m regulator available on amazon mounted to the gun set to around 22psi. The guns instructions say go 29psi but it feels way too high of pressure at 29psi. I also immediately upgraded the cup to the 1000mL titan aluminum cup off amazon (you need to extra "import gun" adapter too). With all those pieces, you get a very nice spray gun. I have so far used it to spray 2k urethane primer and single stage enamel. I am yet to find out if this 1.5mm tip will be good with clear coat.
Travisio Milagro
Reviewed in the United States on November 13, 2014
I'm a professional cabinet and furniture finisher. I specialize in lacquers and clear finishes. I purchased this at the same time as a graco-sharpe, and while the graco lays down a fine finish, this gun outperforms it in every way in a production environment.It lays down a great, even coat with a very wide fan. The atomization is great, and the gun maintains usable tolerances for extended periods of spraying. It lays down more lacquer than the graco, and while multiple thinner coats do result in a harder finish, this gun allows me to produce a high quality finish in less passes. Due to this I can put out more work faster, all while maintaining very high quality control.This is the best gun I've ever used for production, and I will be buying it for years to come.
robc809
Reviewed in the United States on September 2, 2013
Was skeptical of it because of price and no real reviews! Few parts easy to clean up good quality spray gun. I have used sata, devibiss, Sharpe, and yes the ever so cheap hb guns but in my opinion the painter and his experience makes all the difference. This gun worked perfectly withmy small air compressor due to its low air consumption and laid down base and cheap clear beautifully! (Didn't even have to cut and buff) in my opinion best gun for the money and perfect for do it yourself er'! Only flaw is cup filter has plastic filter that inserts which has tab which makes contact with fluid needle and make it stick open ruining a good paint job.....cut off tab and every thing will work properly! Save yourself the time of reviewing and comparing other guns and prices BUY THIS GUN!
Recommended Products
