Your cart is empty.
Your cart is empty.This is a Authentic made in the USA Easy Wood Tools Ci4 diamond carbide cutter designed to fit all of the Details in the Easy Wood Tools line. Authentic EWT cutters have the optimal 3G’s of Carbide - Grade, Grind, and Geometry.1) The Right Grade: Carbide is a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particle are referred to collectively as the ‘grade’. There are literally hundreds of thousands of conceivable grades and no ‘one grade’ of carbide is suited for all applications – whether wood cutting or metal cutting. The perfect combination of cobalt and grain size in EWT Carbide cutters yields a cutting edge that is both the keenest and the most durable grade for woodturning available today. 2) The Right Grind: EWT grinds all of their cutters on super rigid CNC grinders to prevent micro chipping of the cutting edges. EWT uses the proper grit diamond wheels to produce the flattest, truest surfaces possible with minimal grinding scratches left on the surface. All the cutter surfaces are ground in the optimum sequence to bring the edge into keenness during the very last process, or once again micro chipping of the cutting edges will occur if the proper sequence is not followed. 3) The Right Geometry: EWT grinds all their cutters to the correct angles and geometries specifically for woodturning. This produces an edge that cuts both cleanly and safely for all skill levels. Only when grade, grind, and geometry are in harmony will you have a cutting edge for high performance woodturning. Comes with replacement 4-40 countersink machine screw.
Bhurgh
Reviewed in the United States on July 5, 2024
These cutters are excellent at what they are designed to do. Very clean cutting at low and high speeds. Even cutting through very hard exotic woods (including many that contain tool dulling silicate) these cutters last a long time. This particular cutter is great for very fine detail turning.
howard nelson
Reviewed in the United States on September 30, 2023
Can use this cutter without any catches
t_hurst
Reviewed in the United States on July 21, 2019
I like to use the carbide tip detailer for some of my turned vessels. In general I prefer traditional tools, but these are great for a variety of little things, including shaping the tenon.
bendwriter
Reviewed in the United States on February 22, 2018
I've switched all my turning tools over to Easy Wood Tools, and I have to be one of their biggest fans! Like all of their inserts, this one is of the highest quality in both materials and workmanship. Highly recommended!!
Robert Bardin
Reviewed in the United States on May 29, 2017
Great, I did get a complete unit with screw on the third try, first one blew way under my front porch, (found a month later by lawn guy) (got credit though) Second one arrived without 4-40 screw, (got credit) Third one OK. Now using one and it is amazingly sharp. I really almost want to use for roughing and everything. Make your own handle and shaft.
Nicholas Driscoll
Reviewed in the United States on April 10, 2016
I used this on a home made turning tool. It is sharp and durable. If you want to save money on turning tools this and other carbide tips work well on home turned handles. Recommend.
Customer
Reviewed in the United States on September 23, 2015
If you're buying this,, you know exactly what they are... they work as you would expect.
Diamond Jim
Reviewed in the United States on January 18, 2013
The carbide cutter makes my woodturning so much easier. Sharpening is not needed that often. It is a, truly, worthwhile investment. I have no doubt this tool will probably last longer than I do
Recommended Products
$59.99
$ 31 .99 $31.99