Your cart is empty.
Your cart is empty.Street And Performance tachometers and gauge consoles for the budget minded enthusiast.
NJBuyer2
Reviewed in the United States on March 1, 2025
Even with the gauge illuminated, the needle is almost invisible in the dark. The voltmeter also seems to read about 1 volt low, as others have noted.
David AM
Reviewed in the United States on July 7, 2024
Easy install
George
Reviewed in the United States on October 30, 2023
Arrived on time, works great, easy to install.
Rejean Pichette
Reviewed in Canada on January 30, 2023
Sur mon tracteur, tout est parfait
Pacific
Reviewed in the United States on April 26, 2023
Great little gauge, so far works great. Keep in mind that this is 1 1/2 inch gauge. I made my own housing using a 1 1/2 inch pvc pipe coupling and abs pipe cap, painted to match the dash. Most gauges are 2 inch and you can find housings for them, but I wanted something small. It’s still easy to read despite its size. If you are looking for a small gauge, this is it.
Garcol
Reviewed in the United States on December 5, 2022
Bulb does not last very long. Consistantly about 1 volt off from actual voltage. It does work though!
Mr Z
Reviewed in the United States on December 11, 2021
Although it is generally considered as a car gauge i used it to mount on my GL1800 to monitor its chaging system. Works great
Nathan M. Gant
Reviewed in the United States on July 24, 2013
haven't installed it on my dash yet, but working on it. Works fine. Recommend for anyone with a need for a convenient voltmeter.
Hiwaycruiser
Reviewed in the United States on May 24, 2013
I have used many of these in tight applications or cars that only had idiot lights (87 Caddy Broughm and most recent in a '95 Olds 88). There size makes them perfect to mount in the dash or in the case of the Olds, in a useless cubby under the radio. Two of them so far have read 2-3 volts under actual voltage. Kind of worrysome when you see the gauge only at 12 volts with the engine running. Auto Meter warranted one of them but now it is ready way low. Voltage check with quality meter shows 13+volts at the wires and the gauge only showing 12. Will see if I can get the 2nd one replaced under warranty. These are the only two I have had a problem with. I know there are better gauges out there but my space is limited. I also mounted similar oil pressure and temp gauges with no problems with those.
Recommended Products
