Your cart is empty.
Your cart is empty.Product Description
Replace Part Number:
68V-8A360-00-00 68V8A3600000
INP-771 INP771 INP 771
CDH-210 CDH210 CDH 210
731969A MD319791
1571065D00 15710-65D00
84212223 842-12223 842 12223
Package Include:
- 4 x Fuel Injector Flow Matched as pictured
Vinh
Reviewed in the United States on January 8, 2025
This is a chinese copy. Doesnt last long
Customer
Reviewed in Canada on July 16, 2024
Good fit and identical to the OEM unit on a 2011 Yamaha F115 works great!
Rick Russell
Reviewed in the United States on June 2, 2024
I used these injectors in two F115 Yamaha outboards with great results on both engines. one engine has 10 hours run time on it now and still working well.
Bjørn Nilsen
Reviewed in the United States on November 16, 2024
Fitted perfect on my Yamaha F115AET 2006 engine. Reached 6000rpm very fast.Will buy it again.
ROSANCO
Reviewed in the United States on October 14, 2024
Los he montado y probado, y van de cine!Espero que guarden esa funcionalidad durante miles de horas!
Casey R
Reviewed in the United States on April 19, 2023
After reading all the reviews on the injectors, I went ahead and bought a set. I have a flow bench and so I would test them before install1 was dead and not workingOne was flowing 25% more then the other 2 that seemed to be flowing less then the ones I was pulling out 🙄So if your going to route TEST them before install. Or find a different brand/product
Nicholas
Reviewed in Canada on June 7, 2022
Good bang for your buck considering what one OEM injector costs.
Gilles C.
Reviewed in Canada on September 9, 2021
I was not sure if they would fit my F115 and afraid that it would not run properly but i was amazed when i ran my boat after installation.I now get full 6000 rpm and gained 8 mph.It was cheaper for me to buy the new one’s compared to getting the original one’s cleaned and calibrated.They are really indentical(CDH210) and even the same color.I will most likely buy a spare set(not worth fixing the original one’s)i am very pleased with my purchase.The only setback is that seals(engine block side) are not included but o-rings are so i used my original seals.The pic if of my original one’s.Great buy..
Zantetskuen
Reviewed in Canada on September 21, 2020
Product looked right, functioned well.
Joe Wittig
Reviewed in Canada on September 12, 2020
came in the mail installed them and they work as they should.
Capps
Reviewed in the United States on August 30, 2020
Update, ran the engine at the lake on 9/4/20 Engine performed flawlessly at all ranges of speed. As of 6/22 still working perfectly with over 225hrs on them. Would recommend these and would buy them again!!These injectors are identical to OEM Yamaha. These fit my 2005 Yamaha 115TXR. My local Yamaha dealer wanted over 300.00 for the OEM injectors. Changing them was very easy and the fit was perfect. I didn’t give 5 stars because they did not come with the o-ring that goes on the end of the injector that goes in the intake manifold. I didn’t want to, but I used the old old oring from the original injector. No leaks, engine seems to idle much better. Will have to fully test at the lake, so far I would buy again.
Chris Hofer
Reviewed in the United States on June 22, 2020
I bought these to swap injectors in my yamaha 115 outboard boat motor after starting to have what I believed was either a failed or clogged fuel injector. These are a direct fit replacement and even have the same exact stampings on them as the OEM injectors I removed. These worked absolutely perfect, were easy to replace, and totally fixed my misfire/low power issue I developed with my boat. All of this for a fraction of the cost of buying these injectors from a yamaha dealer. The only part worth noting is that you need to reuse the little black o-ring that the injector sits on where it goes into the motor. So if you are buying these and swapping them with original, make sure you keep that o-ring and reuse it when installing these new injectors. With the cost of these being so low, I am going to buy another set to have as a spare instead of wasting my time and money sending out the old injectors for a flow test and rebuild.
BriGuy
Reviewed in the United States on March 26, 2020
Used these to replace the injectors in my 2006 F115TLR. These injectors were obviously used, but overall in fairly good condition and had the washer and microfilters replaced.One of the injectors supplied had a slight chip in it, but works well (mostly cosmetic, but does highlight that these are used rebuilds).However GREAT value for the money. Resolved my low speed issue (due to only 3 of 4 cylinders firing due to lack of fuel) and boat went from 15 mph WOT at 4200 rpm max to 28 mph WOT at the 6200 rpm cutoff.NOTE: you will NEED to purchase separately the bottom washer as it does not come with it (only the top), or else reuse the ones on your existing injectors. I bought a rebuild kit to get the washer (and thus technically did not need to buy these injectors), but bought these injectors anyway so I'd have a spare set (ie: put in these newer ones, rebuild the old and use those for spares).
Recommended Products
$15.51
$ 6 .99 $6.99