Your cart is empty.
Your cart is empty.This is a Brand New OEM Replacement Furnace Blower Motor
Bob
Reviewed in the United States on September 17, 2024
Got the motor one day earlier than expected. Motor mounted perfectly on my Goodman 100-3 furnace. Only issue was when it was time to wire it up. There was one less wire than the old motor had. My old motor was a four-speed motor, high, medium high, medium low, and low. The new motor only has high, medium and low. I ended up putting the medium motor wire on the medium high connector on the circuit board and everything seems ok.
Customer
Reviewed in the United States on November 14, 2024
Wrong voltage. It was 120 volt and it said it was supposed to be 230 volts. I waited to put it on when the weather started getting colder. It was like 4 days past the 30 days.
Daniel Robert Smith
Reviewed in the United States on November 18, 2023
I was able to install this product as replacement furnace blower motor using a youtube video and saved myself lots of $$$. Product was VERY well packaged and I appreciated that. The product also arrived in great new looking condition and I was happy that all of the correct wires were in good shape and ready for hookup to the circuit board. I would recommend this product to anyone trying to save money and DIY your furnace blower replacement. The install is very simple as long as you have a video to follow along with.
D. W.
Reviewed in the United States on October 1, 2022
Had to replace a dead motor. The repair is a little bit intimidating because you have to pull apart quite a bit to get at it. Just label everything and TAKE PICTURES!! Getting the fan unit out is a b***h, and getting it back in is even worse. Anyone who’s done this on a Goodman will tell you that. Also getting the blower wheel off the old motor might be a pain. But none of this is about the motor itself. This one runs smooth.There aren’t any instructions so DIYers will need to know what they are doing. It wasn’t a exact wire for wire swap for me as my control board had connections for 3 speeds, and this motor has 2. But there are YouTube videos that make it clear what to do. (I tried contacting the seller and got no response.).But I did the repair myself and saved a lot of money!
Charles Gustafson
Reviewed in the United States on April 30, 2021
This is a OEM part and works WAAYY better than the one that was in the furnace. Shipping was fast and it is so quiet and almost no vibration. Make sure to clean the blower wheel well before installing it on the new motor. you will definitely get at least a third more air movement through the vents. 100% worth the money.
651tammy
Reviewed in the United States on January 16, 2020
Easy to install just had to change the plug up a little bit plugged in and works great would highly recommend I can pick this unit up for a wonderful price
TennisMikeyJ
Reviewed in the United States on October 12, 2018
I have a 24 year old Goodman model gmp100-3 furnace. Whenever the blower motor was supposed start, it only buzzed. If I reached in and gave the squirrel cage a spin, the motor kicked in. I replaced the capacitor for 10 bucks but no help. I put this motor in and, so far, works great. This motor came with the disconnect terminals on the wires. The wires were black, red, white, blue with a green ground and 2 brown for the capacitor. The original motor had an additional yellow wire but an online schematic wiring diagram showed which terminals to use.
Customer
Reviewed in the United States on September 7, 2016
I kind of thought this was going to more of a direct replacement item but making this motor work took me awhile to figure out. Overall, I'm very happy with the part and learned quite a bit about motors in the process of figuring out how to connect this. Great part so far, I'm very happy my ac is working again.
Recommended Products