Shopping Cart

Your cart is empty.

Your cart is empty.

Baomain Pneumatic 1/2 Inch Normally Open 2 Way Brass Electric Solenoid Valve for Water,Air 2W-160-15K (AC 110V)

5.0 Write Review
Free shipping on orders over $29.99

$35.58

$ 17 .99 $17.99

In Stock

About this item

  • Product Name:2 way Solenoid Valve, 1/2'' PT port
  • Inlet/Outlet Ports: 1/2 Inch Female Threads
  • Operation Mode: Normally Open
  • Valve Type:Direct Acting, Wet Armature
  • Body Material: Brass; Weight: 680g
  • Package Content: 1 x Solenoid Valve


Product Description

Baomain Brass Electric Solenoid Valve Normally Open 2W-K

  • BAOMAIN Brass Electric Solenoid Valve is Normally Open Operation Mode, the Valve Opens when Power off.
  • It is widely used to control the flow of various types of water in a pipeline system. It allows you to start, stop of water flowing through the pipe of most DIY projects,Controlling Garden, Farm,Pipeline, Artificial River ,etc.

Technical Details

Operation Mode Normally Open NO / Valve Open when de-energized
Motion Type Direct Acting, Wet Armature
Body Material Brass
Outlet Connection Type PT Thread
Plunger Tip NBR
Work Media Water, Gas, Light oil (< 20CST)
Operating Termperature -5 ~ 80 °C / 23-170°F
Max. Pressure Resistance 0-145Psi/0.1-1.0MPA（10 Kgf/cm）
Working Pressure 0~5 Kgf/cm2
Voltage Optional 12V/24VDC, 110V/220VAC（ ±10%）
Threaded Port 1/8‘’, 1/4‘’, 3/8'', 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', 2''
Aperture Do Flow Ratea 2.5/2.5/4/16/20/25/32/40/50
Cv Value 0.23/0.23/0.6/4.8/7.6/12/24/29/48
Waterproof Level IP54
Duty Cycle 50,000 times
Baomain Brass Electric Solenoid Valve Normally Open 2W-K
Brass Electric Solenoid Valve Normally Open 2W
Baomain Brass Electric Solenoid Valve Normally Open 2W-K

Valve Open when de-energized, water goes through. Recommend to use NO valve if open a long time, and shut down for a short time .

Baomain Brass Electric Solenoid Valve Normally Open 2W-K

  • Please select the valve’s bore size and Operation Mode matches the system efficiently, avoiding any issues like leakaging, insufficient water flow, increased energy consumption, or equipment damage .
  • Regular Inspection and Cleaning the Electric Solenoid Valves, Proper maintenance ensures long-term stability and extends service life.
  • Exterior Cleaning Frequency: Clean every 3–6 months, the more frequent in dusty or corrosive environments. Dry thoroughly with a clean cloth to prevent moisture-induced corrosion
  • If valve can not work , please try to check as belows:
  • 1. Please re-connect power supply wiring .
  • 2. Please confirm if power supply voltage is within the operating range.
  • 3. Please check whether the coil is desoldered or short circuit, Please replace the coil if defective.
  • 4. If Fluid temperature is too high, please replace the appropriate solenoid valve.
  • 5. Please check if any impurities makes valve spool stuck , or sealing damage should be replaced.
  • 6. Liquid viscosity is too large, too high frequency and life has end to make a replacement in time.
Baomain Brass Electric Solenoid Valve Normally Open 2W-K