Your cart is empty.
Your cart is empty.Product Description
Friendly Reminder: 1. Compatible with handlebars 21.2-22.3mm outer diameter. 2. Designed for flat-bar mountain bikes. It may not be compatible with drop-bar bikes or bikes with special handlebar setups. 3. Please ensure your bike is suitable before purchasing
Zilacon
Reviewed in the United States on May 9, 2025
Quality end or center aluminum bar grips. A hassle free install, no rubber to twist on, and no worries of plastic breaking. Just slide on and tighten the screw and your good to go.
Sarah
Reviewed in Canada on May 22, 2025
I got these because I went on a 3 hour bike ride and my hands were going a little numb. I sometimes go out on my bike and collect cans.They were easy to install. I cut off just enough foam on my handlebars to fit these on.I went on another ride with the new handlebars for about 2 1/2 hours. The first half of the ride, I barely used them, because I preferred to keep my hands close to the brakes. I liked that the handlebars hooked my plastic bags and prevented them from flying off.On the way back, the wind was stiffer. I used the new handlebars almost the whole time. It was a little hard, but much better than the last ride without them.On short rides, these handlebars make the ride feel great.On longer rides, they make a tough ride much more bearable.
The Viner
Reviewed in Canada on May 21, 2025
I recently got a new bicycle and it did not come with bullhorns by default. I am a taller person at 6 foot 2 and to lean over to using the handlebars normally is uncomfortable so I grabbed these bullhorns from Amazon and I'm glad I did. They're a little slim but if you tighten them up enough they seem to hold well and they are doing exactly what I needed them to, they gave me a little extra height to work with so I don't have to lean over quite so far when driving my bicycle.They're easy to install, comes with a small Allen key to attach them to your handlebars if you don't have one so you don't even need to worry about anything like that. It tells you to tighten them up every now and then, I've been using mine for about three weeks and I haven't had to yet, but I do check them from time to time to make sure they are still holding tight.If your bicycle doesn't come with bullhorns, and you prefer to use them, this is a pretty solid set of bullhorns. They are a little small in the hands, but they are comfortable to hold onto overall and that's what's most important.
R.
Reviewed in Canada on May 17, 2025
I've been mountain biking for years now and have done many DIY upgrades and improvements over that time - adding these horns is one thing i never thought would make such an impact - but it has.For riding longer distances these are great for straightening out and aligning your posture = less hunching forward so if you have back /shoulder / neck issues of any kind they're great.They also give you a bit more leverage for crushing those big hills - which is a big win (IYKYK) and the added control and stability is absolutely noticeable. It's nice feeling a bit more agile on the bike!They're made of high-quality aluminum = they're weight baring and can be trusted not to snap if you lean hard into them (i've seen this happen before with older / lower quality horns and it's not pretty!)They took literally 3 minutes to install - simply cut the old grip in the place where you'd like them to sit and mount them using the provided hex screw / allen key (make sure they're good and tight, obviously :) )Overall if you're looking for a simple, cost-effective but high impact upgrade for your biking experience these are a great option!
Matt
Reviewed in the United States on May 15, 2025
These fit my handlebars perfectly, seem to tighten up and stay in place quite well, and are identical to the similar but more expensive branded ones you can find. Overall, I can confidently recommend these for the average mountain bike cyclist.
A.F.Chan
Reviewed in the United States on May 14, 2025
Hgh quality electroplated aluminum bike handles. smooth and curved surface which is ergo to hold onto on the side. The handle can be secured well on the handle barweight is fair for MTB or gravel bike, but it could be on the high side for road bike.I used it as the resting aero bars for my road bike on recreational triathlon sprint. not the best for installation, as I need to take off the current braking subassemblies, sliding theoug slowly, and over the bent area of the road bike handle bar. It would be perfect if it has a two piece design so that i can just clamp it right at the right position.I still give it a five star. as I assumed my use case is not the main intended scenario of this product.
Kurt
Reviewed in Canada on May 14, 2025
The media could not be loaded.
Johnny_B
Reviewed in the United States on May 12, 2025
Very simple to put on and adjust. A single 4mm screw tightens each to the end of your handlebars. Once tightened down as instructed, they don't move at all. They feel nice in the hand and provide several grip positions. These look to be a one piece construction with a nice transition from grip to bar end. No fear of these snapping under hard use. Finish seems to be a good quality paint or powder coat with a slight, non-grippy texture. Very nice and good angles on all of the bends. Highly recommended.
Whirlwind
Reviewed in the United States on May 12, 2025
As the title states, these bike bar ends are a inexpensive comfort and control accessory. They made my ride more enjoyable and comfortable by providing better ergonomics and positioning for my hands and back. They are made of quality materials with excellent fit and finish.
SAMSQUANCH
Reviewed in Canada on May 12, 2025
These bars are extremely well manufactured, such great premium feeling bars and I cannot use them 😭 my e-bike handle bars are much too thick to put these on. Such a disappointment but that in no way takes away from the bars themselves, extremely well made and solid. Just sucks that I cannot use them, but just by feeling them I can tell they will be great to apply to other bikes. Hopefully they fit yours 👌
MG
Reviewed in the United States on May 11, 2025
These bicycle handle bar extentions are very easy to put on and give you an alternative grip on the handlebars so you can rest the muscles that you usually use with your palms down. With these your palms are to the side. Good material and comes with the allyn wrench for tight installation.
Recommended Products