Your cart is empty.
Your cart is empty.The Blazer C7425 patent pending, LED square trailer light kit with integrated back-up lights is designed to conform to applicable US FMVSS108 and Canadian CMVSS safety standards for trailers under 80" wide. The life of an LED trailer light far exceeds traditional incandescent trailer lights. The low amp draw and durability of an LED provides a maintenance-free light and the quicker illumination keeps your safer while on the road. The back-up function of gives you 350 lumens of light providing illumination to more accurately back, dock or garage trailers. The back-up light also provides a visual warning to others that the trailer is moving in reverse. Lenses are sonically sealed to provide protection from moisture and corrosion. Additionally, all electronics are potted with water resistant resin for a second layer of defense. The stop/tail/turn lights feature universal back and side mount options. Kit includes (2) stop/tail/turn lights, a 20’ 5-way wire harness, corrosion resistant license plate bracket, mounting hardware, and trilingual instructions, everything needed for easy installation. Note: 7 Blade to 5 Way Flat needed for installation.
Albert Day
Reviewed in the United States on September 13, 2024
Lights work great, nice and bright! (after I added a solid ground wire!!) I am disappointed there are no parts kits, only the complete kit. So if I break a light in the future, I'll need to buy the whole kit with wiring.
Bernadine Cochran
Reviewed in the United States on August 12, 2024
Looks great and simple to install, assuming you have some electrical experience
Chad Wright
Reviewed in the United States on May 22, 2024
Easy to install and work great. I like the backup light in them.
Jason T.
Reviewed in the United States on February 14, 2024
Needed to replace plug on wire harness , so decided to get some with reverse lights in them. Bought a 7 way plug harness instead to make it easier and have a heavier plug on trailer. Have all new lights and wiring. Should be good for a long time.
Neil
Reviewed in Canada on November 21, 2024
Liked them and a terrific deal half price compared to other brands.
Dan De Pons
Reviewed in the United States on June 7, 2022
The lights are great. Pretty easy to install. The wire that comes with it is plenty adequate for the size trailer I have. My only issue is the size of the light. Compared to the lights that were on my trailer these ones seemed bigger and didn’t fit right. I had to cut some plastic away just to get them to sit more flush with my mounting bracket. And they are still slightly angled down and not flush.
Valentine
Reviewed in Canada on July 21, 2021
Finally someone found a clever way to integrate reverse lights into a typical trailer lights kit!I would have given it 5 stars if it would have come with the 2 front, yellow, side marker lights.The Good: Awesome lights kit, bright, comes with both the 5 pin wiring kit for the trailer end AND the 5 pin wiring kit for the car end. Smart thinking as 5 flat pin connectors are somewhat rare. You can connect your trailer with the new 5 pin flat connector to a 4 pin flat connector wired car and everything will work fine, you just won't have reverse lights functionality. Good price for the products provided.The Bad: The wiring kit for the trailer end only comes with a short ground wire, which, I guess is standard, but if you have bad grounding transmission through your foldable trailer, for example, the lights will flicker. I spliced ground wires going all the way to the back lights and front yellow marker lights.The lights are sold as submersible, however one of my lights wires were not sealed properly like like the other light was. Maybe just a slip up of one worker in the factory.The Ugly: Nothing
Alberto Vazquez
Reviewed in Mexico on October 19, 2021
A MUY BUEN COSTO, JALAN MUY BIEN
Stanley
Reviewed in Canada on August 29, 2019
Purchased these lights because they are LED and had all of the required components (side marker light, running lights, brake lights and reverse lights in one package that was easy to install. The lights came with a test feature for the white reverse lights so I waited until it was dark outside and tested the reverse feature and found it more than adequate for our little trailer. The wiring harness had both the car and trailer sections. Spliced into the reverse lights in the Escape and extended the wire to reach the length required to join up with the rest of the old 4 wire system. Attached the new 5 wire car end by dipping the stripped wire ends into electrical grease and then crimping the butt splice connectors and sealing them. Did the same with the left and right tail lights. It was easy and works perfectly. Bought these lights
NanoShopper
Reviewed in the United States on August 16, 2018
These lights are good, though with an unsuspected truck wiring issue - at first I thought otherwise.Before installation, I tested the lights - by wiring them together with the included wire nuts, and plugging into my truck's harness. Of course, wire nuts shouldn’t be used on submersible wiring - so you have to provide your own connectors.The driver's side brake and turn lights did NOT work, though the running lights did. The right side running, turn, and brake worked as expected. I used an inline tester between the truck and trailer lights, which showed that the truck wiring was correct - but, read on!What I didn't at first notice, was: some of the inline tester lights were slightly dim, indicating a truck wiring problem. Turns out, it was the truck wiring adapter was bad - and the Blazer lights are fine.The local trailer store sells Blazer lights, and has had good luck with them.I do recommend, Blazer Trailer lights!
Ken Smith
Reviewed in Canada on October 5, 2018
Very happy with this product. The lights illuminate brightly and seem to be of good quality. Worth the $
Ray
Reviewed in the United States on August 6, 2017
Instructions were very clear and easy to follow for installing these on my 8' x 5' utility trailer. I am relatively handy, but had never done wiring on a trailer before. It took an hour or two to complete, but was well worth it. The lights are nice and bright, which were a huge upgrade over the old stock ones. Being marine-grade is an added bonus for durability. These have been on my trailer for approx. a year now and still work perfectly.
B Deines
Reviewed in the United States on July 16, 2015
Great product, fantastic customer service! For years I have used Wesbar and Optronics trailer lights so I was hesitant to buy from Blazer but I'm glad I did. They had more LED diodes in them than the other lights and they were less expensive...that is what convinced me to try them. However, when they arrived I was pleasantly surprised to see that included in the packaging was a small battery and switch that allowed me to try the lights before ever opening the packaging. Great idea! The lights were super easy to install but I broke the lens when I installed the second one. This was entirely my fault as there was a dent in my trailer at the edge of the hole I was installing the light in and I tried to force it rather than fix the dent. So I called customer service and was able to speak with a real English speaking person right away. She told me that the lights should still work fine even though the lens was cracked. This is important because the lights are submurseable but not sealed. She was right, the light still works, even even with the broken lens completely under water. She also informed me they did not have replacement lenses for this product but because I was honest about breaking it myself they would send me out a free replacement light. This is something my company would do but rarely do I find other companies who treat their customers so well. Needless to say I was very impressed and the next time I need trailer lights I will only by Blazer!
Recommended Products
