Your cart is empty.
Your cart is empty.Product Description
This pin wrench set fits trim and tilt end caps for ALL Yamaha Suzuki Johnson Evinrude.
Replaceable Pins are available. All pins can be engaged caps and prevent breakage.
Specially designed to easily & properly to remove and install the trim caps without damage, helps you effectively rebuild the trim seal on the trim and tilt unit. Ideal tools set for boat owners and mechanics.
Easy Operation: Each pin wrench features a 1/2” Square Drive to fit a 1/2 inches torque wrench or breaker bar for easy use.
Premium Material:
Made from top quality STEEL
Prevent from rust and corrosion
Ensures long term reliable service
Package Includes:
1 × 32mm Pin Wrench
1 × 35mm Pin Wrench
1 × 38mm Pin Wrench
9 x S-4mm Replaceable Pins
3 x S-4.5mm Replaceable Pins
3 x L-6mm Replaceable Pins
Pin Wrench MT0004-38mm:
Replacement Pins: MT0005 - S-4mm
Minimum Pin Strength: 180 ft-lb
Directly replaces for Yamaha factory tool: YB-06175-2B
Fits for all Seastar Steering Cylinders;
Trim and Tilt Caps for all Four Stroke Yamaha V6 (F200-F300)(3.3L, 4.2L);
Trim and Tilt Caps for Non-VMAX 2-Strokes (225-300hp);
Tilt Caps for 2011-Current F150;
Notes: This wrench is not compatible with VMAX.
Pin Wrench MT0006-32mm:
Replacement Pins: MT0005 - S-4mm/4.5mm
Minimum Pin Strength: 180 ft-lb
Directly replaces for Yamaha factory tool: YB-06175-1A and YB-06548
Fits for all SHOWA-manufactured Trim/Tilt Units
Trim Caps for Yamaha F115-F150
Trim Caps for Yamaha l4 2.8L (F175-F200)
Trim Caps for Yamaha 2-Strokes (115-225hp)
Trim Caps for Yamaha VMAX
Trim Caps for Suzuki Honda Johnson Evinrude
Pin Wrench MT0009-35mm:
Replacement Pins: MT0011 - L-6MM
Minimum Pin Strength: 200 ft-lb
Directly replaces for Yamaha factory tool: YB-06548
Fits for all SHOWA-manufactured Trim/Tilt Units
Trim Caps for 2004-2010 Yamaha F115-F150
Trim Caps for Yamaha l4 2.8L (F175-F200)
Trim Caps for Yamaha 2-Strokes (115-225hp)
Trim Caps for Yamaha VMAX
Trim Caps for Suzuki Honda Johnson Evinrude
John Mercer
Reviewed in the United States on March 28, 2025
Very cheaply made, pins that screw in broke off first time I used it. Made out of pot metal. Stay away.
Jesse Nelson
Reviewed in the United States on October 10, 2024
Bought these because it seemed like one out of the three would work for my Bayliner tilt and trim , all too big , replaceable parts and they’re made well for a cheaper version of the professional tools , they would have worked if they were a little smaller in diameter , even though they come with several sets of different size pins . Didn’t work for my hard to please application , but at least I’ll have these for someone else’s boat / if ever needed
Paul Zimmerman
Reviewed in the United States on July 13, 2023
It looked well built however advertising was fits all which is misleading. Will not work on my old 1987 40 HP Johnson. Liked the idea of using 3 pins instead of two. Ordered a universal 2 pin and hopes this one will fit?
IGOR
Reviewed in the United States on May 17, 2023
for disassembling and assembling the hydraulic cylinder
Greg Phillips
Reviewed in the United States on May 16, 2023
Set of 3...worked good...but one of the pins fractured on first use...it has 6 of the same size pins. The same 3 hole tool will work with 2 pins on bottom of hydraulic piston to sealTool worked good..
Dolce
Reviewed in the United States on December 2, 2023
Missing the L-6 pieces we needed. Sending back for a refund .
Drago
Reviewed in the United States on April 29, 2022
Managed to loosen the seized up caps with this tool. Coupled to Dewalt 20v High Torque Cordless Impact Wrench.
joe r
Reviewed in the United States on April 25, 2022
First use of wrench was to remove trim caps on 225 Yamaha. Broke 3 of the s4 pins, used a small pair of channel locks (which easily removed cap). I do not believe that the pins are hardened as easy as they broke.
Recommended Products