Your cart is empty.
Your cart is empty.Carburetor Rebuild Kit for EDELBROCK 1477 1400 1404 1405 1406 1407 1409 1411 Fits All Automotive 500 600 650 700 750 800 CFM Weber Marine Carburetor Mercruiser kit 809064 Carter 9000 Series
Robert C.
Reviewed in the United States on January 4, 2025
4 stars , only because I had to trim gaskets to fit. Thats what you get from China. It did work
BHenderson
Reviewed in the United States on May 29, 2021
Not bad but some holes didnt line up quite perfect
Bob W.
Reviewed in the United States on October 29, 2021
First off, the gaskets are poorly stamped, but can be used by trimming them (shouldn't have to do that). Second, and this is important, on the needle and seat, the pilot opening in the seat, on the kits I received, were .155 opening, the needle tip is only .152, so the viton tip on the needle actually pushed into the seat and the never touched the seat opening, would never shut the fuel off. The needle sat so far into the seat it only measured .035 above the seat. Now compare that to the factory needle and seat, pilot opening was .092, and the needle was .145 above the seat which made adjusting the float much easier. The seat's they sent in the kit had the threads cut wrong (someone else mentioned this as well in a review), they wouldn't thread into the carb properly. Ended up using the new needles and the old seats (shouldn't have to do that). Third, the accelerator pump shaft, although made of brass which I liked, the hole in the pump shaft for the linkage ("S" link) to attach to, was too small, opening was .088, the "S" link measured .096, so had to drill out using a .097 drill bit for it to work properly (shouldn't have to do that). I do this for a living (Certified Master Technician with 49 years experience), and do not need to spend my time modifying their kit for me to be able to use it on a customers car. Hope they get this issue straightened out, as the 2nd kit I purchased will be getting returned to Amazon as defective. A note to the company if you read this, I took pictures of everything as well if you wish to contact me.
Amy
Reviewed in the United States on September 15, 2020
This was perfect for the rebuild job i was doing very durable
Amy Alexander
Reviewed in the United States on August 13, 2020
It was a complete kit
DAVID MARTINEZ
Reviewed in the United States on August 11, 2020
Extra parts just to make sure that my carb got fixed properly.
Ron B.
Reviewed in the United States on May 30, 2020
Kit is junk, gaskets cut wrong and improper thickness, accelerator pump diameter too small and is useless, threads on float seat are wrong and won’t screw into carb, needles won’t fit original seat. Absolutely the worst I’ve ever bought
charles
Reviewed in the United States on November 15, 2020
Gaskets were rough cut .Had to knock out a few holes . Gaskets were thin and everything in the kit looked cheap . Only used gaskets and accelerater pump wich I had to drill hole bigger for linkage .
Recommended Products
