Your cart is empty.
Your cart is empty. Fits :
2017HondaCRF50F
2016HondaCRF50F
2015HondaCRF50F
2014HondaCRF50F
2013HondaCRF50F
2012HondaCRF50F
2011HondaCRF50F
2009HondaCRF50F
2008HondaCRF50F
2007HondaCRF50F
2006HondaCRF50F
2005HondaCRF50F
2004HondaCRF50F
2003HondaXR50R
2002HondaXR50R
2001HondaXR50R
2000HondaXR50R
1977HondaZ50AMini Trail
1976HondaZ50A
1975HondaZ50AMini Trail
1974HondaZ50AMini Trail
1973HondaZ50AMini Trail
1978 HondaZ50AMini Trail
1999HondaZ50R
1998HondaZ50R
1997HondaZ50R
1996HondaZ50R
1995HondaZ50R
1994HondaZ50R
1993HondaZ50R
1992HondaZ50R
1991HondaZ50R
1989HondaZ50R
1988HondaZ50R
1987HondaZ50R
1986HondaZ50R
1985HondaZ50R
1984HondaZ50R
1983HondaZ50R
Replaces Part No: 16100-GEL-A81
Billy Buck
Reviewed in the United States on August 24, 2024
I guess it's the alcohol they put in gas these days, but trying to clean out the stock carburetor was not working. The cheep Chinese carbs leak and don't last, but buying this carb - hook it up and I have my grand child riding his 50cc right away. Works great
Customer
Reviewed in the United States on March 5, 2024
Carb works just fine. No adjustments needed. Great price and fast shipping.
Frankenburban
Reviewed in the United States on March 20, 2024
Was super happy with it, direct fit and needed zero adjustment
Maytagtom
Reviewed in the United States on February 27, 2024
A couple of modifications to fit the bike. But started right up and ran perfect.
Joshua Chipman
Reviewed in the United States on November 26, 2024
Installed carb gas was pouring from over flow removed replaced main jet with jet from old carburetor working perfect 2002 crf50I say good buy for $
Max
Reviewed in the United States on October 3, 2024
As other reviewers have stated, main jet is totally different, so take the one from your old carb or get a replacement. Worked well for a couple weeks then float froze up and dumped most of my tank onto the ground.. readjusted float and it seems fine now. It’s worth a shot in my opinion considering it costs the same as a knock-off rebuild kit.
Trent Mcinnis
Reviewed in Canada on October 20, 2024
Worked for 1 day then stopped working
Jennifer
Reviewed in Canada on July 22, 2023
It fit in place of my honda 50 carbourator that failed .
Stacy Lackie
Reviewed in the United States on December 24, 2023
We used this carb on a little Honda PW50, worked great, little adjustment for the air and idle but quick to install. The original carb was shot due to the owners leaving gas in it and not using the bike for a few years. I was able to install and used the factory carb slide so no need to undo the throttle cable making it even a easier swap.
Kim
Reviewed in Canada on November 17, 2023
Good product and good price
Cole
Reviewed in Canada on May 7, 2020
Great product
Graham Smith
Reviewed in Canada on September 16, 2019
fit well, no problems
David
Reviewed in the United States on July 23, 2018
I did get this to work with about 10 hours of tinkering. Bought a two year old crf 50 that had never been started. Pilot jet plugged. Took vise grip, removed pilot jet, got it unplugged, bent in half trying to replace. I have had decent luck with cheap parts but not on the 50cc carbs. For starters the needle doesn't have much taper so it's basically all or nothing, and it didn't idle for crap. I do know how to set a carb. I tried my needle with their jet, vice versa, paired as should be, nothing worked worth a damn. I ended up cutting a ring in my factory needle so I could raise it a quarter inch, put in factory jet and completely plugged off the engine side jet. Basically I made it like an oem factory carb. It's not too bad now but for all the time and effort, I would buy the oem instead
Recommended Products