Your cart is empty.
Your cart is empty.Product Description
TECHNOLOGY SPECIFICATION
- Battery Life: ≥5 years
- Temperature measurement range: -40°C + 125°C
- Pressure Monitoring Range: 100 – 900kPa
- Operating Frequency:315±0.05MHZ
- Electric Current:Static≤4uA\Instantaneous emission≤3.3mA
- Voltage:2.3-3.6V
PACKAGE QUANTITY
4pcs* Tire Pressure Monitoring System Sensor
About Tire Pressure Monitoring System Sensor
What is TPMS?
Tire Pressure Monitoring Sensor monitors tire pressure and temperature. It helps you know the situation of four tires and prompts you to take in-time actions to prevent puncture and damage to car parts caused by flat tires. It also helps prevent flat tires, forecast leakage, reduce tire wire, prolong tire life, improve fuel efficiency and increase traffic safety.
OEM
56029319AB,56053036AA,56029465AB,56029479AB,68078861AA,56053030AB,68038945AA,56029526AA，68001696AA
Step 1: Select “Check Sensor ” in ATEQ scan tool(like VT46)
Step 2-4: Select vehicle brand, mode and year .
Step 5: Select tire location then push button warning light to trigger.
Step 6: Wake up sensor successfully and display sensor information（Real ID,Pressure, Frequency，battery status） on screen,also you can hear the sound"bi~"
Important Notes:
1.This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool.
2.Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID,Pressure, Frequency，battery status
Excellent Battery Performance
●Battery is made to last up to 5-10 years or 87000hours of normal use
●Would works at -40 to 125 degrees.
Advance Chip Technology
●precision engineered internal digital electronic circuit
●Best signal strength
●Real-time PSI reading
All-weather metal stem
●Anti-aging
●Passed strict air tightness, outflow test and anodized to prevent air leakage, rust and corrosion
Question:How to choose the right tire pessure sensor?
Answer:Please double check the compatibility of the listed tpms sensors confirm if it is suitable for your car
Question:Does the TPMS sensors need to be programmed?
Answer:The tpms sensors are pre-programmed and Auto-Relearn.they will activate by themselves when you drive your car for up to 20 minutes above 15mph
Question: What should you do before install the sensor on your car?
Answer:Advise your installer to scan tpms sensors to make sure their tool can retrieve sensor information such as frequency,tire pressure ,battery status and etc before install sensors on your car. Avoid unnecessary installation fees.
Question: What should you do if the TPMS sensors can not work?
Answer:Please feel free to contac us if you have any problems, believe us,we are professional and we will try our best to service for you.
scott w threlkeld
Reviewed in the United States on May 13, 2025
one sensor lasted about six months ,all 4 went bad in less than 2 years !!! total crap !!!
Jhonny Jesus Melo Nuñez
Reviewed in the United States on June 5, 2024
Todo perfecto, se borro la alarma del tablero de forma automatica a recorrer varios kilometros
Jose
Reviewed in the United States on May 28, 2024
Muy buenos 👍 buena calidad
brad siljeg
Reviewed in the United States on August 5, 2023
Fits in easy and no problems light went after I took the spare off. 08 jeep wrangler Sahara unlimited jk has 5 sensors when setting take off spare for correct reading otherwise light will not go off. Also notice after driving around 40-50 miles the light comes on.So long trips light will come on. But will rest after 12 hours and short drives
M Johnson
Reviewed in the United States on June 30, 2023
Works as advertised. I have a 2011 Chrysler 200. Installed and drove 5 minutes and it programmed itself. Love it.
Customer
Reviewed in the United States on February 3, 2023
The garage didn't activate the tpms in my car again so I don't know how well it works. But everything looks good
Dames D.
Reviewed in the United States on August 4, 2021
Installed them and the tire pressure light went out in 5 mins. No trip to the dealership.
Mojo
Reviewed in the United States on December 23, 2020
These came pre programmed at 315Mhz and worked perfectly to replace my 10 year old factory sensors. Installed with no OBD || code readers or any programming necessary. Drove off and my 2010 dodge nitro recognized the sensors within 10 minutes of driving.
Recommended Products