Your cart is empty.
Your cart is empty.Product Description
Greater Durability
The motor with zinc alloy aluminum housing and pure copper turbine and worm inside for greater durability.
Low Noise, Good Quality
Using full metal gear, less noise, quieter motor operation.
Controlled Steering
You can change the wiring of the motor positive or negative change the direction of rotation of the motor.
Self-Locking Function
Turbo worm gear motor is self-locking, that is, in the absence of electricity in the motor, the output shaft does not turn, that is, self-locking, the self-locking force does not exceed 1.2 times the rated torque.
Speed:
0.6RPM 1RPM 2RPM 3RPM
4RPM 6RPM 10RPM 12RPM
18RPM 20RPM 25RPM 30RPM
40RPM 50RPM 60RPM 80RPM
100RPM 101RPM 115RPM 120RPM
160RPM 230RPM 375RPM
Specification:
Shaft: D-shaft；
Shaft Diameter:6mm；
Female thread diameter of shaft:3mm*12mm；
Total Shaft Length: 14mm；
Voltage:
- 3V
- 6V
- 12V
- 24V
Steve Wilson
Reviewed in the United States on January 4, 2025
Nice working. However, my bearings were a little tight so I needed a bit more torque to spin the arm. Rats.
Jk
Reviewed in Germany on January 21, 2025
Gute Qualität!
杉本悦久
Reviewed in Japan on April 30, 2025
12Vのわりには、トルクが大きい。
lavallee
Reviewed in France on September 7, 2024
bien pour le modelisme
Gene Orstead
Reviewed in the United States on February 17, 2024
It runs smoothly but very noisy after about an hour!
RTV
Reviewed in the United States on February 12, 2024
I purchased this worm gear motor for a little project. It came in a plastic bag and is nice and small. I will write back if this does not last a year, but so far it seems like a great "little" find.
Roy D Brady
Reviewed in the United States on December 6, 2024
This didn't work for what I wanted it to do.I will say this is a very high quality product.
elio
Reviewed in Italy on December 15, 2024
L'avevo preso per un progetto fai da te, funzionante e ben fatto è ancora lì che fa il suo dovere.
Denson Di Rosa
Reviewed in the United States on March 13, 2023
A 6 volt 115 rpm version was ordered a week later & arrived within 2 days. Excellent little gearbox for my R/C robotics project. The 12 volt gearbox was running late & has yet to be found…..
SB
Reviewed in the United States on December 18, 2023
I'm using it with a lead screw to provide linear force. A simple DPDT (on-off-on) switch provides reversible motion. Gearbox looks like a robust build. It would be useful if they added an axial load limit to the spec. sheet (I ended up adding thrust bearings to the lead screw to protect the gearbox). I also bought one of the 10 RPM motors.
Theodore Wagner
Reviewed in the United States on January 3, 2023
Motor is very quiet and its power consumption is remarkably low.
Mike B
Reviewed in the United Kingdom on June 18, 2021
This heavy little unit is really solidly built and oozes quality.You get a metal housing with the top shaft sticking out the top that has a M3 internal thread. The motor has two small solder terminals, positive marked with a red dot.Wire it up to 12V and it will rotate clockwise at around once every two minutes. It's almost silent in operation and there's no vibration. It's got quite good torque, so as long as you balance it right, you'll have no issues.Reversing the polarity changes direction, and adjusting the voltage will affect the speed (within reason - I didn't want to over drive it, or run too low a voltage that it would burn out).There are M3 holes on the 'top' (same side as the shaft output) for mounting. Holes underneath would have been nice, or at least a flange or two.
Recommended Products
$74.88
$ 29 .99 $29.99