Your cart is empty.
Your cart is empty.Product Description
CKPSMS-high quality sewing machine parts
industrial sewing machine parts
CKPSMS industrial sewing machine parts are mainly used for Brother, Consew, Durkopp Adler, Gemsy, Golden Wheel, Jack, Juki, Kansai Special, Kingtex, Mitsubishi, New Long ,Pfaff, Reece, Seiko, Shang Gong ,Shing Ling, Singer, Siruba, Sunstar, Taking, Treasure, Typical, Unicom, Union Special, Viking, Yamata,Yamato and Zoje and more
household sewing machine parts
CKPSMS sewing machine household parts are mainly used for Babylock, Bernina, Brother, Consew, Elna, Janome, Juki, Kenmore, Kingtex, Pfaff, Singer, Viking, Yamata and more
sewing machine accessories
CKPSMS sewing accessories include sewing machine foot pedal, switch, plug, chalk, cleaning gun, tagging gun, tagging pin, disappear pin, thread cutter, scissor, oilers, tweezer, sewing machine led light, tapes, iron shoes, cloth clamps, belts, belt covers, ruffler , gears, solenoid and the others
presser foot
CKPSMS provides all kinds of sewing machine foot including high shank, low shank, slant shank, industrial shank, snap on feet and more
CKPSMS-full series sewing machine parts
sewing machine folder
CKPSMS provides All kinds of sewing machine folders, please do note that cut size is the tape-in size (your fabric strip/tapes width), finish size is the tape-out size after the folding
sewing machine needles
CKPSMS provides most of your required needles- Universal, Ball point, Denim or Jean, twins with the brands Organ, Singer, SCHMETZ, and Groz Beckert
bobbins
CKPSMS provides all kinds of bobbins and bobbin cases
The bobbin case gently and securely nestles the bobbin so that the machine can unravel the thread without damaging movements
embroidery hoop
CKPSMS provides embroidery hoops for household and industrial use
Embroidery hoops and frames are used to keep fabric taut while working embroidery or other forms of needlework.
CKPSMS is your sewing machine on line clinic
bobbin case
CKPSMS bobbin cases are mainly used for Babylock, Bernina, Brother, Consew, JUKI, Janome, Kenmore, Pfaff, Singer, Viking, Nakajima sewing machines and more
rotary hook
CKPSMS rotary hooks are mainly used for Brother, JUKI, Consew, Pfaff, Singer, Typical sewing machines and more
needle plate
CKPSMS needle plates are mainly used for Babylock, Brother, Consew, Elna, JUKI, Kenmore, Necchi, New Home, Pfaff ,Singer, White and Yamata sewing machines and more
looper
CKPSMS loopers are mainly for Babylock, Brother, JUKI, Pfaff, Singer, Viking, Union Special sewing machines and more
John Fabry
Reviewed in the United States on September 14, 2024
It fits way too sloppy to ensure a precise gear mesh. I should have returned it before it reminded me to review. I bought another from sewing parts online and it has a much better fit. I’m sure it would run for a while, but the set screw would push it off center a little so the teeth would not mesh consistently and wouldn’t spin true. Shaft diameter was 0.312”, gear I removed was 0.314”, this was not even a smooth bore and averaged 0.318”. I didn’t feel that the teeth profile were as crisp either. Call it only 0.004” bigger, but the sloppy fit was obvious. Take it for what you will.
CHRISTOPHER D KISSINGER
Reviewed in the United States on July 7, 2024
Seems more durable plastic than the original brittle 70s black plastic.Photo 1: new gear installedPhoto 2: original broken gear
Jeff Leoni
Reviewed in the United States on May 28, 2024
It is correct for the machine. Not everyone will be able to replace this part you should be mechanically inclined and have a few tools watch the boring YouTube video
John
Reviewed in the United States on November 8, 2024
The id. Is .003 inch oversized and poorly finished. [See pic.]. The plastic gear is off concentricity with the hub by .017 inch. wich is a "country mile" pertaining to gear mesh. For those two facts, when installed it intermittently binds with the driving gear.The seller did respond promptly and after all that was said refunded me in full.Update: It turns out, after the seller contacted me assuring a full refund, I have not been refunded. I will take this up with Amazon and see where I get.
Allen Surrey
Reviewed in the United Kingdom on November 10, 2024
This bevel gear for a Singer sewing machine was sold as a direct replacement for my old gear that had stripped a couple of teeth. Initially when fitted it jammed against its mating gear making it very difficult for the machine to rotate. I relieved the metal boss so that it would fit with a small backlash but the gear was so eccentric on its boss (or the hole was drilled off centre) that the backlash was so great 180 degrees apart that the motor run unevenly and noisily that I ditched this gear and brought a 'genuine' Singer replacement that worked perfectly.
T.
Reviewed in Canada on August 2, 2023
Had to adjust the hight slightly to make it fit my machine, but I'd rather have to remove some material than have to add! Works perfectly now!
jovino
Reviewed in the United States on August 16, 2023
Good price, good quality. Fits and works.
Customer
Reviewed in the United States on May 8, 2023
Was glad to be able to order this part and keep my machine running.
marco
Reviewed in Italy on March 21, 2023
Ok
Customer
H
Reviewed in the United States on November 28, 2023
Replaced the gear in my sewing machine. It was quite a process, and took all of my patience, but it is done!It is unfortunate that this gear is not to be found made from metal. I am certain I will be replacing this plastic gear once again when it wears out.
K with a k
Reviewed in the United States on March 26, 2022
The gear is assembled poorly and the gear itself wobbles up and down causing inconsistent gear mesh. I wouldn't recommend this as it is a low quality aftermarket part. I don't expect it to last long on my singer 457
Rachael
Reviewed in the United Kingdom on May 24, 2021
bought a part for my nans old sewing machine it fit perfect boyfriend fitted it having never done anything like that before. will buy from again as was a trusted part for old singer machine
MICELLI PHILIPPE
Reviewed in France on April 9, 2021
l'engrenage a été monté et fonctionne.. l'ancien était tenu par une goupille, celui ci se fixe par une vis sans tête.. je conseille de percer légèrement un des trous sur l'axe afin que la vis se positionne mieux et assure un meilleur maintien
Recommended Products