Your cart is empty.
Your cart is empty.Product Description
Denis J. Doiron, Northern Ontario, Canada
Reviewed in Canada on May 24, 2024
Exactly what i ordered
Bill Connon
Reviewed in Canada on January 18, 2023
The velcro sanding disks do not stick to the tool. If you stick a sanding pad on the tool and start the sander the disc flys right off. I fixed the problem by removing the velcro from the pad and the rough surface from the holder. I then attached carpet tape to the tool and attached the sanding disk to the tape. It's a workaround but is time consuming. I don't recomend anybody buying this item.
Eileen S Romero
Reviewed in the United States on September 22, 2020
I purchased 2 sets of these sanding fingers, The problem is the sanding pads don't stay on the pad holder. the backing on the sanding pads is not strong enough. It might work for very very light work. Once the sanding pads start shifting the holder gripping surface gets damaged and your done. Very low quality sanding pads. I will not purchase again.
Robert
Reviewed in the United States on July 2, 2020
The finger worked well once it was modified to fit my Craftsman Multi Tool. Not much to it, a Dremel drill and a cut off wheel. Fixed. My bad also as I did not catch that the picture showed a completely closed finger, I just read the description. Had no problem with the hook pad coming loose.
TheRedMuse
Reviewed in the United States on October 21, 2020
awesome value & great for those places that normal sanders cant reach
Panther Fantasy
Reviewed in the United States on October 21, 2020
In my honest opinion, this product could and should be tweeked! I have and have had issues with the pads staying attached to the pad! My pads wouldn't stay on for more than a minute! If the manufacturer could fix this issue, I would rate it worth your time. The overall value could be good if it actually functioned (even on the lowest speed setting of my Dremel). The only way to get a sanding disk to stay attached for any length of time, would most likely be with using superglue.
ricky ricardo
Reviewed in the United States on July 9, 2019
works fine. just know that if you press down to hard with the tip, the rubber backing will start to disintegrate... i wish it was a little more durable.
Orrin K.
Reviewed in the United States on March 5, 2019
On my first attempt at sanding with my Fein multitool, the sanding pad fell apart with 5 minutes of use. The pads hook and loop material wore off and it separated from the foam base. I think if you had a variable speed tool and ran it at the lowest speed it might fair better but my tool has only one speed.
rives norbert
Reviewed in France on October 25, 2019
ras
Frank Hatchett
Reviewed in the United States on July 26, 2018
Good purchase
plj6942
Reviewed in the United Kingdom on October 16, 2017
Pad to soft ,melts when sanding disc get hot with very little pressure.
Tim H.
Reviewed in the United Kingdom on September 8, 2016
Very poor quality, unfortunately. The grip between the 'velcro' type backing of the sanding sheets and the pad is very weak, and on my Bosch multi-tool they just won't stay on even at minimum speed
A
Reviewed in the United States on September 18, 2016
I initially gave this a 4 star, after 3 hours of use, but during hour 4 the hook and loop crapped out. I didn't melt it because i ran it in speed 2 setting. I think the hook and loop is just so tiny it broke from the back and fourth friction. I got 60% of my project done. I'm gonne see if i can get some industrial hook and loop on there as the pad is still okay. If not, i will order the Fein attachment. I did find the larger sandpaper to be better for me.
Recommended Products
$18.20
$ 8 .99 $8.99