Your cart is empty.
Your cart is empty. CB09 Graphtec Blade Holder Vinyl Plotter Holder with 30pcs Blades
Which can help install: You can use a magnifying glass, strong light and most importantly handling the blade and spring with tweezers (which will save you sticking yourself).
How to set your depth by using a scrap of vinyl?
Using your hand to hold and pull the knife housing with the blade set to where you can hardly see it...and with a little pressure you pull it across the vinyl. Do this several times while adjusting the screw, until it does not cut the backing paper. you can laid a magazine under the vinyl to protect the table.
Please set up the depth just right. Be sure to do a depth test cut so you don't ruin your project!just compare it to the Cameo blade and then do a test cut.
Once you've installed the blade, turn the button at the other end of the holder to adjust the cut thickness. unscrew the black tip, insert the blade, add the spring, screw the tip back on. The hard part is making sure the blade goes to the right place and the spring stays on.
Tips:
1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem.
3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.
Package Includes:
1 x Blade holder
10 x 30 Degree Cutter Blade (Yellow)
10 x 45 Degree Cutter Blade (Red)
10 x 60 Degree Cutter Blade (Blue)
RDP
Reviewed in the United States on October 30, 2022
I love these, they work very well in our VinylExpress Q-series cutters. We mainly use them for heavy sandblast masks, and they work great. They work very well on vinyl, too, and are reasonable enough in cost that I'm not worried about using a new blade.
SEG
Reviewed in the United States on July 24, 2021
Item did not work with my machine. I reached out to the company, no response on return and refund. Now too late to do anything. Stuck with an item I cant use.
Sean
Reviewed in the United States on June 27, 2021
Blades are excellent!This CB09 blade holder is.....insert your own word for bad
Leticia
Reviewed in the United States on March 6, 2021
Awesome!
Speedzone
Reviewed in the United States on October 22, 2021
It is great but you have to replace it pretty often.I know I didn't pay high $$$ for German or Japanese product so it is what it is.Cheap enough !
Customer
Reviewed in the United States on January 4, 2021
I have not used this enough to give it a full review, but at first I thought the blades did not fit the holder and went looking at reviews to find others had the same issue. I ordered another one from a different vendor and same issue. Started playing with it after watching YouTube videos again and realized that I think they changed the design and that is where the confusion is. I carefully put the blade through the cap first. Lining it up was the hardest part and I did not use the spring. You can see the piece that sticks out of the cap that pushes up and down that I think replaced the spring. Then I screwed it onto the base making sure the blade did not come out of the cap while I did and it seems to work. I'm going to try it that way for a while and will update if I discover something wrong with this setup, but wanted to point this out for people who might be frustrated like I was. I kept the stars at 3-4 since I have not used it enough to know if there will be problems and I wish they would send clear directions in the packaging. It would save many people, including the seller, a lot of headaches.
sherry storm
Reviewed in the United States on April 9, 2021
the housing it to big for the adapter yall need to fix this and stop ripping ppl off contacting amazon about u
Customer
Reviewed in the United States on December 9, 2020
I received the correct blades but the entirely wrong holder. Definitely not a CB-09. Much too small for blades. I will update my review if customer service makes this right.
Recommended Products
$315.99
$ 99 .00 $99.00
$1,149.99
$ 99 .00 $99.00