Good form, fit and function. No issues with fitment. Good quality. I would order again.

Needs some fitting to go on properly, but looks and feels fine.

One of the grip panels wouldn't fit.

I have a pair of VZ grips on a CZ sp01, and these Cool Hand G10s are just as nice. Fit is perfect and they are a fraction of the price of the VZ's. I have purchased and installed several more of these Cool Hand G10s. All have been great fit and finish. These are now my go to grips. I highly recommend these grips.

Just like many others have mentioned, the hole in the grips don't line up with the screw hole in the frame. The problem isn't the hole, but rather the inletting on the back of the grip. The top and bottom slide rails are correct. The grip angle slide rail is about 1/8" off angle. 10 minutes with a file corrects this angle and allows the grip to seat properly and the screw hole to line up without reaming the screw hole.

Grips look excellent. I was concerned that they would be a lot smaller than the stock rubber grips but overall, they were not super thin. Nice feel and finish.My only issue was that I did not receive the screws and washers per pictures on Amazon. I sent message to seller today and expect I will get a message acknowledging shipping of hardware missed.* Well folks, I did get a response and it was negative. Told me that screws only come with new versions and not these. They said they would take the picture of screws off but as you see they did not. DO NOT expect screw and washer set with grips. I changed rating from 5 to 4 only because of their response.

CZs are great pistols but the grips that are shipped with them, leave a lot to be desired. They’re utilitarian but plain and don’t add to the handling of the pistol.These, grips, on the other hand are stylish, as there are so many color combinations available. The G10 material is durable, shockproof, resistant to water, and with the contours, slip proof. My handling of the pistol definitely improves over the OEM factory grips. Installation is easy, though I’ll need some other types of screws.I have used Cool Hand grips on other pistols. They’re a solid set, and good as any other grips on the market.Check them out.

Good fit and finish. Feels good in the hands and narrows the overall grip which may help smaller hands. Well made product.

These are thinner than the rubber CZ grips. They don't look much thinner but they do feel a lot thinner. I like that the top of the grip is thinner than the rubber grip. (this is where my thumb ends up) I feel like my medium sized hands fit the grip much better than with the stock grip. The pattern looks nice. I got the black and grey ones since I wasn't really looking to add a lot of color.I used the original screws which worked great. At first I used the lock washer which made the screw stick out a bit. I removed the lock washer now and the screws are below the grip. (just that little bit makes a difference) I can no longer feel the screw with my hand. I could actually barely feel it anyway when I gripped it but it was sticking out with the lock washer. I will see how it goes and if they come lose I will either use a bit of thread locker or buy a different st of screws. I used a high quality Wera #2 screwdriver to tighten the screws tight without any slippage.The price is good for a nice G10 grip. I believe they are made of phenolic which is what pool balls are made of. (very hard and durable) The pattern is aggressive and you can feel it a little when you grip the gun. (not much) I believe you could lightly sand it with 600 grit paper if it feels too aggressive. (I won't be doing this)I really like the real rubber grips that came with my SP-01 but in all honesty, my medium sized hands had trouble with the grip size. The only part that bothered me however was the very top of the grip. It swells out and I would rest my thumb above the rubber grip to be able to squeeze a little with my primary grip hand. Now I can grip it straight across the grip without noticing the thickness of the grip. Basically, my thumb doesn't need to be so high anymore. I love that CZ provided real rubber high quality grips so it was a shame to take them off. On a positive note, if I ever want to sell it, they will look brand new and I can put them back on.I also bought 16 round all metal Mecgar magazines for two reasons. One is that I didn't like the plastic at the end of the stock SP-01 mags and the other is that I didn't need the grip to be longer. (again medium/normal sized hands don't require the extra length those provide) 16 isn't as good as 18 but at the range I find myself only loading 10 rounds most of the time anyway. There are videos of people jamming the mag in the gun so hard that the plastic end comes off and the bullets all fall out. (I never jammed it in that hard myself) The only plastic/polymer left on my CZ is the guide rod. I may switch that out for stainless steel from Cajun Gun Works at some point. (actually these G10 grips are kind of plastic now though lol)These grips required zero fitting. (other grips may) I just took the old ones off and put these one. They stay in place with a single screw due to the design of the backside. (they fit into the opening and stay in place nice) The price is great. The VZ grips are more. These are pretty reasonable. The sunburst pattern is very nice. I didn't want the Punisher guy on my grips and thankfully these do NOT have him on there. Other reviewers have pictures that show what these look like installed so I didn't bother.In my mind, these were an inexpensive upgrade. I highly recommend unless you have massive hands. (and even then they might be good) The Shadow and Shadow 2 have thin aluminum grips and people with massive hands use those guns just fine. The grip is thinner but other than that it is still a very large, very full sized grip.

super

These are the best bargain in CZ 75 grips. Much better than the LOK grips, and I'll tell you why: First off, they fit properly. I had a set of LOK grips for my CZ 75 SP-01, and no matter how much you tightened the grip screw, they shifted around, because the ledge that fits in the magazine well wasn't machined precisely. These are. No shifting at all. These feel great, and look amazing. For $20 less than VZ grips, with what I consider a better grip surface, you can't go wrong. The grip is aggressive without being punishing. They really compliment an already beautiful handgun. I'd get some now before they get to be more well-known and popular, with a commensurate rise in price. As it is, these are a relative bargain. And I didn't receive anything for my honest review :).